Timer LTC6905HS5-100#TRMPBF TSOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C689615 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

Timer CDCLVC1102PWR TSSOP-8_L4.4-W3.0-P0.65-LS6.4-BL LCSC Part Number: C113325 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer NA555S-13 SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL LCSC Part Number: C182035 JLCPCB Part Class: Extended Part Manufactured by DIODES(美台)

IC SURGE STOPPER 2.7V~23V VQFN-10-HR(2x2) The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices an excellent choice for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to establish an almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation. Output slew rate and inrush current can be adjusted using an external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2mm × 2mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range from –40°C to +125°C. • Wide operating input voltage range: 2.7V to 23V – 28V absolute maximum – Withstands negative voltages up to –15V • Integrated back-to-back FETs with low onresistance: RON = 28.3mΩ (typical) • Ideal diode operation with true reverse-current blocking • Fast overvoltage protection – Overvoltage clamp (OVC) with pin-selectable threshold (3.8V, 5.7V, 13.8V) and 5μs (typical) response time OR – Adjustable overvoltage lockout (OVLO) with 1.2μs (typical) response time • Overcurrent protection with load current monitor output (ILM) – Active current limit OR circuit-breaker options – Adjustable threshold (ILIM) 0.5A to 6A • ±10% accuracy for ILIM > 1A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±6% (IOUT ≥ 1A) • Fast-trip response for short-circuit protection – 500ns (typical) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Adjustable output slew rate control (dVdt) • Overtemperature protection • Digital outputs – Priority power MUX control (AUXOFF) and fault indication (FLT) or – Power Good indication (PG) with adjustable threshold (PGTH) • UL 2367 recognition – File No. E339631 – RILM ≥ 750Ω • IEC 62368-1 CB certified • Small footprint: QFN 2mm × 2mm, 0.45mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Timer TLC556CN PDIP-14_L19.6-W6.5-P2.54-LS7.9-BL LCSC Part Number: C1539985 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-PDIP The TLC555 is a CMOS monolithic timing circuit. The timer is fully compatible with CMOS, TTL, and MOS logic and operates at frequencies up to 2MHz. Because of a high input impedance, this device supports smaller timing capacitors than those supported by the NE555 or LM555. As a result, more accurate time delays and oscillations are possible. Power consumption is low across the full range of power-supply voltage. • Very low power consumption: – 1mW typical at VDD = 5V • Capable of operation in astable mode • CMOS output capable of swinging rail to rail • High output current capability – Sink: 100mA typical – Source: 10mA typical • Output fully compatible with CMOS, TTL, and MOS • Low supply current reduces spikes during output transitions • Single-supply operation from 2V to 15V • Functionally interchangeable with the NE555; has same pinout • ESD protection exceeds 1000V per ANSI/ESDA/ JEDEC JS-001 • Available in Q-temp automotive – High-reliability automotive applications – Configuration control and print support – Qualification to automotive standards #CommonPartsLibrary #IntegratedCircuit

ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit 480MHz 2MB (2M x 8) FLASH 100-LQFP (14x14) # STM32H743VIT6 ## General Description The STM32H743VIT6 is a high-performance microcontroller manufactured by STMicroelectronics and based on the Arm Cortex-M7 core. It is designed for advanced embedded applications requiring exceptional processing capability, extensive peripheral integration, high-speed memory access, and real-time control performance. The device combines powerful computational resources, floating-point processing, digital signal processing capabilities, large embedded memory, and a comprehensive set of communication interfaces within a compact package. Its architecture is optimized for industrial automation, motor control, human-machine interfaces, medical devices, robotics, data acquisition systems, audio processing, edge computing, and high-performance IoT applications. ## Key Features ### Processing Architecture * Arm Cortex-M7 processor core * High-performance real-time processing capability * Floating-point unit support * Digital signal processing functionality * Advanced instruction set architecture * Optimized embedded computing performance ### Memory Resources * Embedded Flash memory * High-speed SRAM architecture * Memory protection support * Efficient code and data execution * High-bandwidth memory access capability * Advanced cache architecture ### Communication Interfaces * USART and UART communication interfaces * SPI communication interfaces * I²C communication interfaces * CAN communication support * USB connectivity capability * Ethernet networking support * SDMMC storage interface support * Flexible external communication options ### Analog Features * High-resolution analog-to-digital conversion * Digital-to-analog conversion capability * Precision signal acquisition * Analog monitoring functionality * Sensor interface compatibility ### Timer and Control Features * Advanced control timers * General-purpose timers * PWM signal generation * Encoder interface support * Motor-control functionality * Real-time clock integration * Event-driven control architecture ### Multimedia and Processing Capabilities * Audio processing support * Signal processing applications * Graphics and display interface support * High-speed data acquisition capability * Real-time analytics support * Edge computing functionality ### Power Characteristics * Optimized performance-to-power ratio * Multiple low-power operating modes * Dynamic power management support * Efficient embedded system operation ### Package Characteristics * Surface-mount package construction * Industrial-grade packaging * High-pin-count peripheral integration * Automated assembly compatible * Suitable for complex embedded designs ### Material Construction * Advanced semiconductor technology * RoHS-compliant materials * Lead-free package construction * High-reliability integrated circuit design ### Environmental Characteristics * Suitable for industrial and commercial environments * Long operational service life * Reliable continuous operation * Stable performance across operating conditions * Robust embedded processing platform ### Application Areas * Industrial Automation Systems * Robotics and Motion Control * Motor Drive Applications * Human-Machine Interfaces * Medical Equipment * Audio Processing Systems * Data Acquisition Equipment * Embedded Computing Platforms * Industrial Networking Devices * Edge Computing Solutions * Smart Energy Systems * Advanced IoT Devices * Test and Measurement Equipment * Consumer Electronics ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade High-Performance Microcontroller Solution ## Manufacturer STMicroelectronics ## Product Family STM32H7 High-Performance Microcontroller Series #STM32H743VIT6 #STM32H7 #STMicroelectronics #CortexM7 #Microcontroller #EmbeddedSystems #IndustrialAutomation #MotorControl #Robotics #EdgeComputing #IoT #DataAcquisition #EmbeddedDesign #FirmwareDevelopment #ElectronicsEngineering

Microcontroller – 32-bit ARM® Cortex®-M0+ microcontroller operating at up to 64 MHz, featuring 32 KB Flash memory, 8 KB SRAM, and 17 programmable I/O pins. Operates from a 2.0 V to 3.6 V supply and integrates a 13-channel 12-bit ADC, internal and external oscillator support, and communication interfaces including I²C, SPI, UART/USART, IrDA, LIN, and SmartCard. Includes DMA, I²S, PWM, power-on reset (POR), and watchdog timer (WDT) peripherals. Housed in a 20-pin TSSOP package. #STMicroelectronics #STM32 #STM32G030F6P6 #Microcontroller #ARMCortexM0Plus #32BitMCU #64MHz #32KBFlash #8KBSRAM #ADC #I2C #SPI #UART #LIN #SmartCard #TSSOP20 #EmbeddedSystems

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

Battery Management ICs BQ24040DSQT WSON-10_L2.0-W2.0-P0.40-TL-EP LCSC Part Number: C2876332 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ2404x highly integrated single-cell Li-Ion/Li-Pol linear battery charger IC for space-limited portable applications, supports USB or AC adapter input, selectable 100mA or 500mA USB input current limit, 1% charge voltage accuracy, 10% charge current accuracy, programmable charge termination and precharge thresholds, 4.35V chemistry support on BQ24045, 30V input rating with 6.6V or 7.1V input overvoltage protection, dynamic power management, thermal regulation and 150°C thermal shutdown, OUT short-circuit and ISET short protection, JEITA battery NTC operation, fixed 10-hour safety timer, status indication, available in 10-pin 2x2mm WSON/DFN package. Search Keywords: BQ2404x, BQ24040, BQ24041, BQ24045, Texas Instruments BQ24040, Texas Instruments BQ24041, Texas Instruments BQ24045, TI BQ2404x, BQ24040 battery charger, BQ24041 battery charger, BQ24045 battery charger, single cell Li-Ion charger, Li-Pol battery charger IC, USB battery charger IC, 500mA battery charger, 100mA USB charger, linear battery charger, 4.35V Li-Ion charger, WSON-10 charger, DFN-10 battery charger, 2x2mm charger IC Hashtags: #BQ2404x #BQ24040 #BQ24041 #BQ24045 #TexasInstrumentsBQ24040 #TIBatteryCharger #BatteryChargerIC #LiIonCharger #LiPolCharger #SingleCellCharger #USBChargerIC #LinearBatteryCharger #500mACharger #100mAUSBCharger #435VCharger #JEITACharger #NTCBatteryCharger #WSON10 #DFN10 #2x2mmPackage

Timer NE555S-13 SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C181735 JLCPCB Part Class: Extended Part Manufactured by DIODES(美台)

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075QRGTRQ1 is an automotive-qualified standalone linear battery charger and power-path management integrated circuit designed for single-cell Li-Ion and Li-Polymer battery applications. The device integrates battery charging, system power regulation, input current limiting, and dynamic power-path management into a compact solution optimized for portable and embedded automotive systems. The charger supports USB and external adapter power sources while automatically managing system load distribution between the input supply and battery. Integrated thermal regulation and safety protection features improve reliability under varying operating conditions and harsh automotive environments. The BQ24075QRGTRQ1 supports programmable charging parameters, battery temperature monitoring, and power-good status reporting. The device is qualified for automotive applications and is suitable for infotainment systems, telematics, portable instrumentation, embedded battery-powered modules, and industrial handheld equipment. Key Features Automotive-qualified battery charger IC Single-cell Li-Ion and Li-Polymer battery support Integrated dynamic power-path management USB and adapter input compatibility Programmable fast-charge current control Integrated thermal regulation Input current limiting capability Battery temperature monitoring support Automatic charge termination functionality Short-circuit and over-temperature protection Power-good and charging status indication Compact surface-mount package Optimized for portable and embedded applications Electrical Characteristics Linear charging architecture High integration power management solution Dynamic load sharing between system and battery Stable regulated system output Programmable charging voltage and current Thermal foldback protection operation Low standby and shutdown current consumption Integrated safety timer functionality Wide input operating voltage range Applications Automotive infotainment systems Portable embedded electronics Industrial handheld equipment Battery-powered control modules Telematics systems USB-powered charging systems Portable instrumentation Data logging devices Embedded IoT products Rechargeable battery management systems Package Information Package Type: VQFN Mounting Type: Surface Mount Automotive-grade integrated circuit package RoHS compliant configuration available #commonpartslibrary #integratedcircuit #batterycharger #powermanagement #automotiveelectronics #lithiumbattery #embeddedhardware #usbcharging #portableelectronics #powerpathmanagement

Timer TS555IDTTR SO-8_L4.9-W3.9-P1.27-LS5.9-BL LCSC Part Number: C880084 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体)

Timer ICM7555IPA+ DIP-8_L10.1-W6.3-P2.54-LS7.6-BL LCSC Part Number: C1520201 ICM7555 / ICM7556 CMOS Precision Timer – low-power general-purpose timer IC compatible with the classic 555 timer architecture. Available as a single timer (ICM7555) or dual timer (ICM7556). Designed for accurate timing, pulse generation, pulse-width modulation (PWM), frequency generation, delay circuits, oscillators, and sequential timing applications. Features ultra-low supply current, wide operating voltage range (2 V to 18 V), TTL compatibility, adjustable duty cycle, and improved CMOS performance compared to standard bipolar 555 timers. Search Keywords: ICM7555, ICM7556, CMOS 555 Timer, Precision Timer IC, Low Power Timer, General Purpose Timer, PWM Generator, Pulse Generator, Oscillator IC, Delay Timer, Monostable Multivibrator, Astable Multivibrator, Frequency Generator, Timing Circuit, CMOS Timer, Analog Timer IC, Low Power Oscillator, Dual Timer IC, Single Timer IC, 555 Compatible Timer Hashtags: #ICM7555 #ICM7556 #CMOS555 #555Timer #TimerIC #PrecisionTimer #PulseGenerator #PWMGenerator #OscillatorIC #FrequencyGenerator #DelayCircuit #Monostable #Astable #CMOS #LowPowerElectronics #AnalogIC #EmbeddedSystems #ElectronicsDesign #CircuitDesign #PCBDesign

Timer NE555PWR TSSOP-8_L4.4-W3.0-P0.65-LS6.4-BL LCSC Part Number: C105643 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer NE555PSR SOIC-8_L6.2-W5.3-P1.27-LS8.0-BL LCSC Part Number: C105601 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer TPL5110DDCT TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C125830 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer TLC556CDR SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL LCSC Part Number: C201587 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer TLC555QDRQ1 SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C130208 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer TPL5010DDCT SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C125800 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer 6V49205BNLGI QFN-48_L7.0-W7.0-P0.50-TL-EP5.4 LCSC Part Number: C907720 JLCPCB Part Class: Extended Part Manufactured by RENESAS(瑞萨)/IDT

Timer CDCE62005RGZT VQFN-48_L7.0-W7.0-P0.50-BL-EP5.5 LCSC Part Number: C108170 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Timer NA555DR SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C128415 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)