Positive post RGB SMD5050 Light Emitting Diodes (LED) #led #commonpartslibrary

Straight 4 pin Pitch 3.81mm Screw terminal block #screwblock #connector #commonPartsLibrary

100 Ohms ±1% 0.1W, 1/10W Chip Resistor 0402 (1005 Metric) Automotive AEC-Q200 Thick Film #CommonPartsLibrary #Resistor #ChipResistor

330 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0805 (2012 Metric) 1.5A 70mOhm #CommonPartsLibrary #Filters #FerriteBeadsandChips

0.1 µF ±10% 50V Ceramic Capacitor X7R 0603 (1608 Metric) #CommonPartsLibrary #Capacitor #SMD

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C receptacle 16 pin USB2.0 The USB4215-03-A is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a 16-pin configuration supporting reversible plug orientation with standard USB 2.0 differential data lines and configuration channel (CC) pins. The connector is intended for surface-mount PCB assembly with through-hole shell stakes for enhanced mechanical strength. It is widely used in compact embedded systems for power delivery, charging interfaces, and basic data communication. Key Features USB Type-C receptacle (USB 2.0 compliant) 16 functional pins (no SuperSpeed support) Reversible plug orientation Surface-mount contacts with through-hole shell tabs Compact, low-profile design High insertion cycle durability Suitable for automated assembly Electrical Characteristics Rated Current: VBUS: up to 5.0 A (depending on PCB design and cable) Signal pins: 0.25 A max Rated Voltage: 20 V DC max Contact Resistance: ≤ 40 mΩ Insulation Resistance: ≥ 100 MΩ Dielectric Withstanding Voltage: 100 V AC Mechanical Characteristics Mounting Type: Surface Mount (SMT) with Through-Hole Shield Tabs Number of Positions: 16 Mating Cycles: 10,000 cycles (typical) Insertion Force: 5–20 N Extraction Force: 8–20 N Material Specifications Contacts: Copper Alloy Contact Plating: Gold over Nickel Housing: High-temperature thermoplastic (UL94V-0) Shell: Stainless Steel Environmental Characteristics Operating Temperature Range: -25°C to +85°C Storage Temperature Range: -40°C to +85°C RoHS Compliant: Yes Halogen Free: Yes Pin Configuration (USB 2.0 Type-C) VBUS (Power) GND (Ground) D+ / D− (USB 2.0 differential pair) CC1 / CC2 (Configuration channel) SBU pins (optional/unused in USB 2.0 designs) Applications USB power input (5 V / USB-C PD trigger designs) Embedded systems and development boards Consumer electronics Charging interfaces Low-speed USB communication devices Packaging Tape & Reel for automated pick-and-place assembly Compliance & Standards USB Type-C Specification (USB 2.0 interface) RoHS / REACH compliant UL recognized materials #CommonPartsLibrary #Connector #USB-C

Multiplexer 1 x 8:1 16-PDIP #CommonPartsLibrary #IntegratedCircuit #Logic #Signal-Switch#Multiplexer #Decoder #74LS151

USB - micro B USB 2.0 Receptacle Connector 5 Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB-micro #USB-B #105017

3000 ohm 3kΩ 0603 (1608 metric) fixed chip SMD Resistor. #CommonPartsLibrary #Resistor #RC0603

General Purpose Amplifier 1 Circuit 8-PDIP #CommonPartsLibrary #IntegratedCircuit #OP-AMP #Amplifier #UA741

Addressable RGB LEDs 3.2x2.8x1.78 mm 0.2W Intelligent external control surface mount SMD LED #CommonPartsLibrary #LED #Addressable

5100 ohm 5.1kΩ 0603 (1608 metric) fixed chip SMD Resistor. #CommonPartsLibrary #Resistor #CRCW0603

2700 ohm 2.7kΩ 0402 (1005 metric) fixed chip SMD Resistor. #CommonPartsLibrary #Resistor #CRCW0402

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #commonpartslibrary #sensor #transducer #accelerometer

27 ohm 27Ω 0402 (1005 metric) fixed chip SMD Resistor. #CommonPartsLibrary #Resistor #CRCW0402

JST PH Connector Header Through Hole, Right Angle 2 position 0.079" (2.00mm) #commonpartslibrary #connector #terminalblock #tht #JST-PH

PCB spring terminal block for wire-to-board connections, featuring a 2-position, 3.5 mm pitch interface with a 45° wire entry and push-in spring connection. It is rated for up to 10 A and 320 V (IEC), accepts 0.2–1.5 mm² (22–16 AWG) conductors, supports PCB through-hole soldering, and operates over a −40°C to +105°C temperature range. #commonpartslibrary #connector #terminalblock #tht