LED Driver IC 1 Output Linear PWM Dimming 500mA 8-SOIC #CommonPartsLibrary #IntegratedCircuit #PowerManagement #PMIC #LED-Driver #NUD4001

dsPIC dsPIC™ 33CK, Functional Safety (FuSa) Microcontroller IC 16-Bit 100MHz 256KB (256K x 8) FLASH 48-UQFN (6x6) 28/36/48/64/80-Pin Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD) Operating Conditions • 3.0V to 3.6V, -40°C to +125°C, DC to 100 MIPS • 3.0V to 3.6V, -40°C to +150°C, DC to 70 MIPS Core: 16-Bit dsPIC33CK CPU • 32-256 Kbytes of Program Flash with ECC and 8-24K RAM • Fast 6-Cycle Divide • LiveUpdate • Code Efficient (C and Assembly) Architecture • 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle, Mixed-Sign MUL Plus Hardware Divide • 32-Bit Multiply Support • Four Sets of Interrupt Context Saving Registers which Include Accumulator and STATUS for Fast Interrupt Handling • Zero Overhead Looping • RAM Memory Built-In Self-Test (MBIST) Clock Management • Internal Oscillator • Programmable PLLs and Oscillator Clock Sources • Reference Clock Output • Fail-Safe Clock Monitor (FSCM) • Fast Wake-up and Start-up • Backup Internal Oscillator Power Management • Low-Power Management Modes (Sleep, Idle, Doze) • Integrated Power-on Reset and Brown-out Reset High-Speed PWM • Eight PWM Pairs • Up to 250 ps PWM Resolution • Dead Time for Rising and Falling Edges • Dead-Time Compensation • Clock Chopping for High-Frequency Operation • PWM Support for: - DC/DC, AC/DC, inverters, PFC, lighting - BLDC, PMSM, ACIM, SRM motors • Fault and Current Limit Inputs • Flexible Trigger Configuration for ADC Triggering Timers/Output Compare/Input Capture • One General Purpose Timer • Peripheral Trigger Generator (PTG): - Up to 15 trigger sources to other peripheral modules - CPU independent state machine-based instruction sequencer • Nine MCCP/SCCP modules which Include Timer, Capture/Compare and PWM: - One MCCP - Eight SCCPs - 16 or 32-bit time base - 16 or 32-bit capture - 4-deep capture buffer • Fully Asynchronous Operation, Available in Sleep Modes #CommonPartsLibrary #IntegratedCircuit #Microcontroller #DSPIC33CK256MP

3.5x3.7×1.9 mm, 0.25 W intelligent externally controlled surface-mount device (SMD) type LED SK6812MINIRGBW-NW-P6 is a smart, addressable RGBW LED that integrates red, green, blue, and neutral white (NW) LEDs with a built-in control IC in a compact SMD package. Each LED acts as an individually addressable pixel, allowing precise color and brightness control through a single-wire digital interface. It is commonly used in RGBW lighting effects, backlighting, gaming peripherals, custom keyboards, LED displays, wearables, and decorative lighting applications. Key Features Individually addressable RGB + Neutral White (RGBW) LED Built-in intelligent control IC and constant-current driver Single-wire serial communication interface 32-bit color data (RGBW control) Cascadable design for long LED chains Integrated signal reshaping for reliable data transmission Operating voltage: 3.5V to 5.5V Typical data transmission rate: 800 kbps 256-level grayscale PWM dimming per channel Compact 3.7 mm × 3.5 mm SMD-6 package Built-in power-on reset circuit Wide operating temperature range: -40°C to +85°C Suitable for animations, indicators, displays, and smart lighting applications. #SK6812MINIRGBW #SK6812 #RGBWLED #AddressableLED #SmartLED #NeutralWhiteLED #DigitalLED #PixelLED #LEDLighting #EmbeddedSystems #PCBDesign #IoT #Electronics #LEDDisplay #LightingControl

Bipolar Motor Driver CMOS PWM 48-QFN (7x7) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Motor-Driver #Controller #TB67H420

LED Driver IC 1 Output Linear Constant Current Analog, PWM Dimming 1.5A 8-DSBGA (1.51x0.8) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Led-Driver #LM36011

LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 30mA 12-DSBGA #CommonPartsLibrary #IntegratedCircuit #powermanagement #LED-Driver

LED Driver IC 1 Output DC DC Regulator Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 3A 8-SOIC-EP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LED-Driver #MPQ24833

Motor Driver Power MOSFET PWM 24-HTSSOP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Motor-Driver #Controller #DRV10970

Bipolar Motor Driver Power MOSFET PWM, SPI 40-QFN (6x6) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Motor-Driver #Controller #L99SM81

LED Driver IC 1 Output DC DC Controller Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 20-HTSSOP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LED-Driver #TPS92692

The HT1632C is a memory mapping LED display controller/driver, which can select a number of ROW and commons. These are 32 ROW & 8 commons and 24 ROW & 16 commons. The device supports 16-gradation LEDs for each out line using PWM control with software instructions. 52-LQFP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LEDdriver

LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1A 8-SO-EP #CommonPartsLibrary #IntegratedCircuit #Powermanagement #LED-Driver #AL8862

LED Driver IC 24 Output PWM Dimming 125mA 48-HTSSOP-C #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LED-Driver

Motor Driver DMOS PWM 8-DFN (4x4) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Motor-Driver #Controller #MCP8063

LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) PWM Dimming 1A TSOT-25 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LED-Driver #ZXLD1362

LED Driver IC 9 Output DC DC Regulator Switched Capacitor (Charge Pump) I²C, PWM Dimming 25mA 20-LFCSP (4x4) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LED-Driver

LED Driver IC 1 Output DC DC Regulator Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 3A 8-SOIC-EP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LED-Driver #MPQ24833

dsPIC dsPIC™ 33CK, Functional Safety (FuSa) Microcontroller IC 16-Bit 100MHz 128KB (128K x 8) FLASH 48-UQFN (6x6) 28/36/48/64/80-Pin Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD) perating Conditions • 3.0V to 3.6V, -40°C to +125°C, DC to 100 MIPS • 3.0V to 3.6V, -40°C to +150°C, DC to 70 MIPS Core: 16-Bit dsPIC33CK CPU • 32-256 Kbytes of Program Flash with ECC and 8-24K RAM • Fast 6-Cycle Divide • LiveUpdate • Code Efficient (C and Assembly) Architecture • 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle, Mixed-Sign MUL Plus Hardware Divide • 32-Bit Multiply Support • Four Sets of Interrupt Context Saving Registers which Include Accumulator and STATUS for Fast Interrupt Handling • Zero Overhead Looping • RAM Memory Built-In Self-Test (MBIST) Clock Management • Internal Oscillator • Programmable PLLs and Oscillator Clock Sources • Reference Clock Output • Fail-Safe Clock Monitor (FSCM) • Fast Wake-up and Start-up • Backup Internal Oscillator Power Management • Low-Power Management Modes (Sleep, Idle, Doze) • Integrated Power-on Reset and Brown-out Reset High-Speed PWM • Eight PWM Pairs • Up to 250 ps PWM Resolution • Dead Time for Rising and Falling Edges • Dead-Time Compensation • Clock Chopping for High-Frequency Operation • PWM Support for: - DC/DC, AC/DC, inverters, PFC, lighting - BLDC, PMSM, ACIM, SRM motors • Fault and Current Limit Inputs • Flexible Trigger Configuration for ADC Triggering Timers/Output Compare/Input Capture • One General Purpose Timer • Peripheral Trigger Generator (PTG): - Up to 15 trigger sources to other peripheral modules - CPU independent state machine-based instruction sequencer • Nine MCCP/SCCP modules which Include Timer, Capture/Compare and PWM: - One MCCP - Eight SCCPs - 16 or 32-bit time base - 16 or 32-bit capture - 4-deep capture buffer • Fully Asynchronous Operation, Available in Sleep Modes

LED Lighting Drivers 37V OVP, 200mV reference, PWM Control White LED Driver #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LEDdriver

LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 215mA (Switch) 6-WSON (2x2) #RegulatorSwitching #commonpartslibrary

LED Lighting Driver ICs LED Lighting Drivers 4-Channel RGBW Driver, I2C, 1.5x1.5mm TDFN The KTD2027BEWE-TR is a highly integrated, low-power RGB LED driver designed for portable and battery-powered applications. It features a compact WLCSP package and provides precise current control for up to three LED channels. The device includes an I²C-compatible interface, enabling flexible control of brightness, color mixing, and lighting effects. Integrated features such as programmable current sinks, dimming control, and built-in protection mechanisms make it suitable for indicators, backlighting, and decorative lighting in consumer electronics. Key Features Triple-channel constant current LED driver (RGB support) I²C-compatible digital interface Independent brightness control per channel Programmable current up to ~24 mA per channel Built-in PWM dimming and pattern generation Low quiescent current for power-sensitive applications Wide input voltage range Thermal shutdown and overcurrent protection Small WLCSP package (suitable for compact designs) Applications Mobile devices and wearables Status indicators and notification LEDs Backlighting and decorative lighting IoT and portable electronics Absolute Maximum Ratings Supply Voltage (VDD): −0.3 V to +6.0 V Logic Input Voltage: −0.3 V to VDD + 0.3 V Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −55°C to +150°C Recommended Operating Conditions Supply Voltage (VDD): 1.8 V to 5.5 V LED Forward Voltage: Dependent on external LEDs Ambient Temperature: −40°C to +85°C Electrical Characteristics (Typical) Supply Current (Idle): < 1 µA (shutdown mode) Channel Current Accuracy: ±5% (typical) Maximum Output Current: ~24 mA per channel I²C Clock Frequency: Up to 400 kHz (Fast Mode) Functional Description The KTD2027BEWE-TR operates as a constant-current sink driver for RGB LEDs. Each channel can be independently programmed via the I²C interface to control brightness and enable dynamic lighting effects. Internal PWM generators allow smooth dimming without requiring continuous microcontroller intervention. The device also integrates protection features such as thermal shutdown and current limiting to ensure reliable operation. Pin Configuration (Typical WLCSP) VDD – Power supply GND – Ground SDA – I²C data line SCL – I²C clock line LED1 – Current sink output (Red) LED2 – Current sink output (Green) LED3 – Current sink output (Blue) Package Information Package Type: WLCSP (Wafer-Level Chip Scale Package) Mounting: Surface mount Tape & Reel: Yes (TR suffix) Ordering Information KTD2027BEWE-TR: Tape and reel packaging for automated assembly #commonpartslibrary #integratedcircuit #leddriver