2 Circuit IC Switch 2:1 10Ohm 10-UQFN (2.0x1.5) The TS5A23157 device is a dual single-pole doublethrow (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. Signals up to 5.5 V (peak) can be transmitted in either direction. Features 1• Low ON-State Resistance (15 Ω at 125℃) • 125℃ Operation • Control Inputs are 5-V Tolerant • Specified Break-Before-Make Switching • Low Charge Injection • Excellent ON-Resistance Matching • Low Total Harmonic Distortion • 1.8-V to 5.5-V Single-Supply Operation • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) 2 Applications • Sample-and-Hold Circuits • Battery-Powered Equipment • Audio and Video Signal Routing • Communication Circuits #commonpartslibrary #integratedcircuit #circuitswitch #TexasInstruments #AnalogSwitch #SPDT #SignalRouting #Multiplexer #LowOnResistance #HighSpeedSwitching #UQFN #EmbeddedSystems #ElectronicsDesign

USB Type C PMIC 40-TQFN (6x6) The MAX25432 combines an automotive-grade buckboost controller capable of full-range 3.3V to 21V programmable power supply (PPS) at up to 6.35A, USB Power Delivery (USB PD) analog front-end (AFE), legacy USB charging support, and USB Type-C® protection switches for automotive USB host or downstream-facing (DFP) applications. The USB TypeC protection switches provide automotive system-level ESD protection and 24V short-circuit protection for D+, D-, CC1, CC2, and VCONN. The device can optionally support legacy charging modes for older passenger phones including BC1.2, Apple® Charge, Apple CarPlay®, Apple MFi, and USB On-The-Go (OTG). The MAX25432B integrates a USB PD AFE, which supports the USB-IF Type-C Port Controller Interface (TCPCI) specification and can interface with any I2C controller in the application. The MAX25432A provides configuration channel (CC) signal pass-through protection for an external USB PD controller. P-suffix and G-suffix devices include intelligent detection and protection to avoid high short-circuit currents flowing from the car battery through the cable shield to ground during fault events, thus preventing car module damage. The MAX25432 is available in a small, 6mm x 6mm, 40- pin TQFN-EP package and requires very few external components. The MAX25432 evaluation (EV) kit and collateral provide a convenient platform to the design engineer for rapid evaluation with reduced test and firmware development time. Integrated I2C Buck-Boost Controller with PPS 4.5V to 36V Input Operating Range 3.3V to 21V Constant Voltage, 10mV LSB 1A to 6.35A Current Limit, 25mA LSB 220kHz, 300kHz, and 400kHz SwitchingFrequency VBUS Cable Compensation up to 516mΩ External Frequency Synchronization and SpreadSpectrum for Reduced EMI USB PD 3.1 Type-C Port Controller USB-IF Compliant - TID 9154 Up to 800mV Ground Offset Pairs with ADI TCPM for Turn-Key Solution MAX25432BATLP Enables: ADI TCPM Alternate Mode and Dual-Role Port Improved CC Detection Advanced Monitoring Algorithms (V, T) Dynamic Loop Control Highest Performance, Safest, and Lowest Cost Passenger Cable-Shield Short-to-Battery Protection Minimizes Short-Circuit Currents with a Small,Single-FET Solution Integrated Current-Sense Amplifiers, ADC and DAC Integrated 3.3V to 5.0V, 1.5W, Smart, Reliable VCONN Switches and Protection, 50mA to 500mA OCP Integrated 24V DC Protection on Protected HVD+, HVD-, HVCC1, HVCC2 Outputs Integrated Legacy USB 2.0 Charging Support Including BC1.2, Apple CarPlay, OTG, and Apple MFi Rev 3x Integrated ±15kV Air-Gap/±8kV Contact Discharge ISO 10605 and IEC 61000-4-2 ESD Protection -40°C to +125°C Operating Temperature Range 40-Pin, 6mm x 6mm, TQFN Package with EP AEC-Q100 and AEC-Q006 Qualified #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Bus Switch 1 x 8:1 24-VQFN (4x4) # TCA9548ARGER Engineering Specifications **General Description** The TCA9548ARGER is a low-voltage I²C and SMBus switch manufactured by Texas Instruments. It is designed to expand and manage I²C communication networks by allowing a single master device to selectively communicate with multiple downstream buses through independent switching channels. The device functions as a bidirectional translating switch, enabling communication between devices operating at different voltage levels while maintaining protocol compatibility. Through software control, individual channels can be enabled or disabled, providing flexible bus segmentation, address conflict resolution, and system scalability. The TCA9548ARGER is widely used in embedded systems, industrial control equipment, data acquisition platforms, telecommunications hardware, server management systems, sensor networks, and Internet of Things applications where multiple I²C devices must be connected to a single controller. Its low-power CMOS architecture, integrated reset functionality, and hot-insertion support make it suitable for complex digital systems requiring reliable and efficient I²C bus management. **Engineering Specifications** **Manufacturer:** Texas Instruments **Manufacturer Part Number:** TCA9548ARGER **Component Type:** I²C bus switch and multiplexer **Technology:** Low-voltage CMOS **Interface Standard:** I²C and SMBus compatible **Switch Configuration:** Multiple downstream I²C channel selection **Channel Operation:** Software-controlled channel enable and disable **Communication Direction:** Bidirectional signal transmission **Voltage Translation Capability:** Supports communication between devices operating at different logic voltages **Bus Isolation Function:** Independent channel isolation for address conflict management **Control Method:** I²C command-based channel selection **Address Selection:** Configurable device addressing through hardware address pins **Power Supply Configuration:** Single-supply operation **Power Consumption:** Low-power operation suitable for embedded applications **Signal Integrity Features:** Low ON-state resistance and low propagation delay **Reset Function:** Dedicated hardware reset input **Hot Insertion Support:** Prevents bus disruption during device insertion and removal **Fail-Safe Characteristics:** Protection against unintended bus communication during power transitions **Bus Capacitance Management:** Improves communication reliability in large I²C networks **System Scalability:** Supports expansion of sensor, peripheral, and control-device networks **Electrostatic Protection:** Integrated ESD protection circuitry **Operating Temperature Range:** Industrial temperature range **Package Type:** VQFN surface-mount package **Mounting Style:** Surface mount technology **Package Construction:** Leadless thermally efficient package **Environmental Compliance:** RoHS compliant and lead-free **Reliability Features:** Designed for high-reliability industrial and embedded applications **Typical Applications** I²C bus expansion systems Sensor aggregation networks Industrial automation equipment Embedded controller platforms Server management systems Data acquisition hardware Telecommunications equipment Internet of Things devices Medical instrumentation Consumer electronics Robotics and automation systems Environmental monitoring devices Smart building control systems Automotive electronic subsystems Multi-sensor embedded applications #TCA9548A #TCA9548ARGER #TexasInstruments #I2C #SMBus #BusMultiplexer #I2CSwitch #EmbeddedSystems #IndustrialAutomation #SensorNetworks #IoT #DataAcquisition #ElectronicsEngineering #ElectronicComponents #EngineeringSpecifications