To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

This is a reference design of boost module based on LT8410, with output voltage 16V and input 2.5-16V #dcdc #boost #power #16V #referenceDesign #powermanagement #analogdevices #template #reference-design

4 Relay Module Made BY Randika

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

This is a reference design of the ESP8684-WROOM-02C WiFi module from Espressif Systems. This board has USB C for flashing via CH340, RESET and BOOT buttons, 3.3V regulator and 2 IO connectors #WiFi #BLE #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

ATMEGA328-PU (U1) Setup Power Supply Connections: Connect U1:VCC to U2:5V@1 (5V power supply). Connect U1:GND to U2:GND@1 (Ground). Connect U1:AVCC to U2:5V@2 (Analog Power Supply for better ADC performance). Multiple GND pins (U2:GND@1, U2:GND@2, U2:GND@3, U2:GND@4) should all be connected to a common ground plane for stability. Serial Communication for Debugging: Connect U1:PD0 (RX) to U6:TXD. Connect U1:PD1 (TX) to U6:RXD. These connections enable serial communication between the microcontroller (ATmega328) and the USB-Serial adapter (CH340N) for programming and debugging. Sensor Data Acquisition: Given the components, the MLX90614ESF-ACC-000-SP (U4) is an infrared temperature sensor that could be used for vital detection. It uses an I 2 2 C interface. Connect U1:PC4 (SDA) to U4:PWM_SDA. Connect U1:PC5 (SCL) to U4:SCL_Vz. This allows the ATmega328 to communicate with the MLX90614ESF infrared temperature sensor. Additional Considerations: An analog-to-digital converter (ADC) or a specialized RF module designed for UWB radar applications would be necessary to capture and process radar signals for detecting human vitals through walls. The MAX270CWP+ (U3) could be used for audio signal processing but may not directly apply to UWB radar signal processing. Power Supply to Other Components Connect U6:VCC to U2:5V@1. Connect U4:VDD to U2:5V@2. Ensure all components' ground pins are connected to the common ground plane (U2:GND@1, GND@2, GND@3, GND@4)

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

A scalable 4x camera array for 3D photogrammetry reconstruction which uses I2C to connect between each module.

GPS01-TD module is a quad-mode Mini GPS module that supports BDS/GPS/GLONASS/Galileo/QZSS/SBAS and fully supports BeiDou B3, which can provide users with high quality, strong anti-jamming and low-power positioning and navigation solutions.

16V 20A Scalable DC/DC Power Module with PMBus #ultralibrarian

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

A rack-mount power distribution module with power monitoring and surge protection

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

This is a LoRa based gas leakage detector design featuring a BME680 gas sensor by Bosch Sensortec. It includes a Seeed LoRa module for RF communication and uses an MCU. The power is driven by two non-rechargeable AA batteries with voltage regulation by TPS613221ADBVR IC. The project also incorporates user interaction components such as indicators (LED) and switches. #LoRa #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #seeed #seeed-studio #template #reference-design

The Photon 2 is a development module with a microcontroller and Wi-Fi networking. The form-factor is similar to the Argon (Adafruit Feather), but the Photon 2 supports 2.4 GHz and 5 GHz Wi-Fi, BLE, and has much larger RAM and flash that can support larger applications. #Particle #Photon2 #Template #Iot #Project-template

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

MFRC522 module I2C