USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB-C #1240201

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB-C #UJC

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) - Power Only 6 Pin Position Surface Mount, Right Angle; Through Hole The 2479774-2 specification defines the engineering requirements for a high-density electronic connector assembly intended for board-to-cable or board-to-board interconnection in advanced electronic systems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure reliable signal transmission, stable mechanical engagement, and long-term durability in demanding electronic applications. The component is intended for use in systems requiring compact interconnect solutions with high signal integrity and robust mechanical retention. It is suitable for applications such as industrial electronics, communication systems, embedded control units, and high-performance electronic assemblies where reliable connectivity and repeatable mating performance are required. Engineering Requirements The connector assembly shall be manufactured using precision-formed conductive materials and high-strength insulating housing materials to ensure stable electrical performance and mechanical reliability. The design shall support secure mating engagement and consistent signal continuity across repeated connection cycles. Electrical characteristics shall ensure low contact resistance, stable signal integrity, and reliable conductivity under defined operating conditions. The connector shall maintain performance under mechanical vibration, thermal variation, and environmental stress conditions typical of industrial and embedded system applications. Mechanical construction shall ensure accurate alignment between mating interfaces, secure locking engagement, and resistance to accidental disconnection. The design shall support repeated mating cycles without degradation of electrical or mechanical performance. Workmanship shall be free from defects such as contamination, deformation, plating irregularities, or structural inconsistencies that could impact reliability or functionality. Manufacturing and inspection shall be conducted under controlled quality systems using calibrated equipment to ensure compliance with engineering requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures prior to implementation. Documentation Supporting documentation shall include engineering drawings, connector datasheets, material declarations, inspection records, qualification test reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through formal engineering change control procedures. Each revision shall undergo technical evaluation, validation, and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #Connector #HighDensityInterconnect #ElectronicComponents #SignalIntegrity #EmbeddedSystems #IndustrialElectronics #Manufacturing #QualityAssurance #EngineeringDocumentation

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (14+10 Dummy) Position Through Hole, Right Angle #CommonPartsLibrary #Connector #USB-C

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #UJ31

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle #commonpartslibrary #connector #usbtypec

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB-C #WR-COM

USB-C (USB TYPE-C) Plug Connector 24 (6+18 Dummy) Position Surface Mount, Through Hole #commonpartslibrary #connector #usbc

This is a motion detector circuit module using an ESP32 microcontroller and PIR sensor. It features USB-C connectivity, RGB LED indication, push buttons and is powered by a 3.3V supply. #reusable #module #edge-computing #edgeComputing #espressif #sublayout #iot #PIR #esp32

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Through Hole #CommonPartsLibrary #Connector #USB-C

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB4081

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB #UJ20

USB-C (USB TYPE-C) USB 3.2 Gen 1 (USB 3.1 Gen 1, Superspeed (USB 3.0)) Receptacle Connector 24 Position Surface Mount, Right Angle #CommonPartsLibrary #Connector #USB #DVI #HDMI #UJ32

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #217176 #217176-0001

This project is a reference design for an ESP32-S2-WROVER based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP-WROOM-02U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP8266 #WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP32-WROOM-32UE based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole #commonpartslibrary #connector #usbc #tht

This project is a reference design for an ESP32-PICO-MINI-02U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32PICO #ESP32PICOMINI #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP-WROOM-02D based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP8266 #WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a of ESP32-S3-MINI-1U. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes user RGB LED #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #USB-C #CX