2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

1/1 Transceiver Half CANbus 8-SOIC The SN65HVD230DR is a high-speed Controller Area Network (CAN) transceiver designed to interface a CAN protocol controller with the physical two-wire CAN bus. It operates as a differential line driver and receiver, translating logic-level signals into robust bus-level signals suitable for automotive, industrial, and distributed control applications. The device is optimized for reliable communication in electrically noisy environments and supports low-power operation, making it suitable for systems requiring energy efficiency and extended operational stability. This transceiver conforms to widely adopted CAN physical layer standards and is intended for use in systems requiring high data integrity, fault tolerance, and electromagnetic compatibility. It integrates protection features and supports standby functionality to reduce system power consumption when communication is inactive. Functional Overview The device provides bidirectional signal conversion between a CAN controller and the differential CAN bus lines. It features a transmit data input and a receive data output, enabling full-duplex communication at the protocol level. The driver stage generates differential output signals on the bus, while the receiver stage detects and translates bus signals back into logic-level data. An internal control mechanism allows the device to enter a low-power standby mode, reducing current consumption when active communication is not required. The transceiver includes slope control capability to manage signal edge rates, which helps minimize electromagnetic interference and improves signal integrity across the network. Electrical Characteristics The transceiver operates from a single low-voltage supply and is designed for compatibility with modern microcontrollers and digital logic systems. It provides differential output drive capability with controlled rise and fall characteristics. The receiver is designed with high input sensitivity and noise immunity to ensure accurate signal detection under varying bus conditions. The device includes thermal protection and safeguards against bus faults, including short-circuit conditions. Its internal circuitry is designed to maintain stable operation across a wide range of environmental conditions and supply variations. Interface Requirements The logic interface is compatible with standard digital input and output levels, allowing direct connection to a CAN controller. The bus interface consists of two differential lines that connect to the CAN network. Proper termination and layout practices are required to ensure optimal communication performance and compliance with CAN network design guidelines. Operating Conditions The device is intended for operation across a broad temperature range suitable for industrial and automotive environments. It maintains functional integrity under typical voltage fluctuations and environmental stresses encountered in embedded systems. Protection and Reliability Features The transceiver incorporates protection mechanisms to guard against overcurrent, thermal overload, and electrostatic discharge. It is designed to maintain communication reliability even in the presence of transient disturbances and electrical noise. Packaging and Integration The SN65HVD230DR is provided in a compact surface-mount package suitable for automated assembly. Its pin configuration supports straightforward integration into printed circuit board designs with minimal external components. #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #65HVD230

Tactile Switch SPST-NO Top Actuated Surface Mount ## Engineering Specification ## General Description The **MSLPT5252AG2TR** is a TE Connectivity ALCOSWITCH low-profile tactile switch designed for compact electronic devices, printed circuit board assemblies, portable electronics, control panels, and user-input interface applications. It provides momentary tactile feedback when pressed and returns to its normal open state when released. The device is suitable for applications requiring a small surface-mount switch with reliable actuation, compact board footprint, and low-profile mechanical construction. ## Device Identification Manufacturer Part Number: **MSLPT5252AG2TR** Manufacturer: **TE Connectivity** Brand Series: **ALCOSWITCH** Product Family: **LPT Low-Profile Tactile Switches** Device Category: **Electromechanical Component** Device Type: **Tactile Switch** Switch Function: **Single Pole Single Throw, Normally Open** ## Functional Description The device functions as a momentary user-input switch. When the actuator is pressed, the internal contacts close and allow an electrical signal path. When the actuator is released, the switch returns to its normally open condition. This makes the component suitable for button input, menu control, reset functions, mode selection, and general human-machine interface designs. ## Mechanical Description The switch uses a compact low-profile construction with a top-actuated flush actuator. It is intended for surface-mount installation on printed circuit boards and is suitable for space-constrained designs where low height and small board area are required. ## Electrical Description The MSLPT5252AG2TR is designed for low-current DC switching applications. It should be used within the manufacturer’s specified voltage and current ratings to ensure reliable operation and long service life. The switch is intended for signal-level control applications rather than high-power load switching. ## Contact and Material Description The switch includes stainless steel contact base material with silver contact plating. This construction supports reliable contact performance for tactile input applications and helps provide stable electrical switching behavior during normal operation. ## Mounting and Assembly Description The component is supplied as a surface-mount tactile switch suitable for automated PCB assembly. Proper land pattern design, soldering profile control, and mechanical clearance should be followed according to the manufacturer’s recommended layout and assembly guidelines. ## Application Suitability The device is suitable for portable electronic devices, consumer electronics, handheld equipment, control buttons, reset switches, interface panels, communication devices, instrumentation, remote controls, and compact PCB-based user-input systems. ## Design Considerations The switch should be placed in a location that allows direct actuator access without excessive mechanical side loading. PCB layout should provide proper solder pad support and mechanical stability. The design should avoid overtravel, excessive actuation force, contamination, and use beyond the rated electrical limits. ## Hashtags #commonpartslibrary #electromechanicalcomponent #tactileswitch #pushbuttonswitch #momentaryswitch #spstswitch #normallyopen #teconnectivity #alcoswitch #mslpt5252ag2tr #lptseries #smtcomponent #surfacemount #pcbdesign #electronicscomponents #electronicparts #switchcomponent #hardwaredesign #userinterface #embeddedhardware #consumer electronics #portableelectronics #componentlibrary #engineeringparts #electronicsengineering