Wireless Power Receiver PMIC 20-VQFN (3.5x4.5) BQ51013BRHLT is a wireless power receiver integrated circuit from Texas Instruments designed for inductive power transfer applications compliant with wireless charging standards. The device integrates power rectification, voltage regulation, communication control, and protection circuitry to enable efficient wireless charging for portable and embedded electronic devices. This receiver IC is optimized for low-power wireless charging systems and supports seamless energy transfer from compatible transmitter platforms without the need for physical connectors. It provides regulated power output suitable for charging batteries and powering embedded systems while incorporating dynamic power management, foreign object detection support, thermal protection, and overvoltage protection for safe operation. The BQ51013BRHLT is widely used in wearable electronics, wireless sensor platforms, medical devices, mobile accessories, handheld products, and compact consumer electronics requiring cable-free charging capability. Its compact package and high integration level simplify PCB layout and reduce external component requirements for space-constrained wireless power designs. #commonpartslibrary #wirelesscharging #powermanagement #texasinstruments #wirelesspower #batterycharging #embeddedhardware #portableelectronics #electronicscomponents #inductivecharging

Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 500mA 8-WFDFN Exposed Pad The TPS6217x device family are easy to use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by utilization of the DCS-Control™ topology. With its wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 0.5-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). Power sequencing is also possible by configuring the enable and open-drain power good pins. In power save mode, the devices show quiescent current of about 17 μA from VIN. Power save mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device is turned off and shutdown current consumption is less than 2 μA. The device, available in adjustable and fixed output voltage versions, is packaged in a 2-mm × 2-mm 8- pin WSON package (DSG). • DCS-Control™ Topology • Input Voltage Range from 3 V to 17 V • Up to 500-mA Output Current • Adjustable Output Voltage from 0.9 V to 6 V • Fixed Output Voltage Versions • Seamless Power Save Mode Transition • Typically 17-µA Quiescent Current • Power Good Output • 100% Duty Cycle Mode • Short Circuit Protection • Over Temperature Protection • Pin to Pin Compatible with TPS62160 and TPS62125 • Available in a 2-mm × 2-mm 8-Pin WSON Package • Create a Custom Design using the TPS62170 with the WEBENCH® Power Designer #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Polymeric PTC Resettable Fuse 16V 3 A Ih Through Hole Radial, Disc # Engineering Specification ## Product Name RGEF300 ## General Description RGEF300 is a resettable polymeric positive temperature coefficient protection device designed to safeguard electronic circuits against overcurrent and fault conditions. The component is intended for use in power distribution systems, low-voltage DC rails, and electronic assemblies where temporary overload protection and automatic recovery are required. The device operates by increasing its internal resistance when subjected to excessive current or elevated temperature conditions, thereby limiting fault current and protecting downstream circuitry. Once the fault condition is removed and the device cools, it returns to a low-resistance state, allowing normal operation to resume without the need for manual replacement. RGEF300 is widely used in industrial electronics, consumer devices, automotive subsystems, communication equipment, and embedded systems where reliable overcurrent protection and system uptime are critical. Its radial-leaded configuration supports straightforward integration into through-hole PCB designs and legacy circuit architectures. The design emphasizes consistent trip behavior, stable reset characteristics, and long-term reliability under repeated fault conditions. It is suitable for applications requiring self-resetting protection elements that reduce maintenance requirements and improve system resilience. ## Functional Requirements ### Overcurrent Protection The device shall limit current flow during fault conditions by increasing resistance when exposed to excessive current. ### Automatic Reset The device shall return to a low-resistance state once normal operating conditions are restored and thermal conditions stabilize. ### Fault Isolation The device shall provide temporary isolation of downstream circuitry during overcurrent events. ### System Protection Support The component shall support use in electronic systems requiring reusable protection elements for power input and distribution paths. ## Electrical Requirements ### Normal Operation The device shall maintain low resistance under normal operating current conditions to minimize power loss. ### Trip Behavior The device shall transition to a high-resistance state when subjected to fault-level current conditions. ### Thermal Response The device shall respond to both electrical current and self-heating effects to initiate protective action. ### Recovery Characteristics The device shall restore normal conduction after fault clearance and thermal recovery. ## Mechanical Requirements ### Radial Leaded Construction The device shall be provided in a through-hole radial package suitable for PCB mounting. ### Structural Integrity The component shall maintain mechanical stability during soldering, handling, and operational thermal cycling. ### Board Integration The device shall be compatible with standard PCB layouts used in power protection circuits. ## Environmental Requirements ### Operating Conditions The device shall operate reliably in industrial, consumer, and embedded electronic environments. ### Thermal Performance The device shall tolerate repeated heating and cooling cycles associated with fault events. ### Storage and Handling The component shall maintain electrical and mechanical integrity during storage and transportation. ## Quality Requirements ### Reliability The device shall support repeated fault recovery cycles without permanent degradation under specified operating conditions. ### Verification Electrical trip behavior, resistance recovery, and thermal response shall be validated through standard qualification testing. ### Compliance The product shall conform to applicable safety and electronic component standards for resettable overcurrent protection devices. ## Documentation Requirements Technical documentation shall include application guidelines, derating considerations, PCB layout recommendations, fault behavior characteristics, and integration practices for circuit protection design. ## Classification Tags #RGEF300 #PTCResettableFuse #Polyfuse #PPTC #OvercurrentProtection #CircuitProtection #ResettableFuse #PowerProtection #FaultProtection #ThermalProtection #ElectronicComponents #ElectricalEngineering #PCBDesign #PowerDistribution #IndustrialElectronics #AutomotiveElectronics #EmbeddedSystems #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #ReliabilityEngineering #SelfResettingProtection

Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A 15-PowerVFQFN The TPS63070RNMT is a high-efficiency buck-boost DC-to-DC converter manufactured by Texas Instruments. This power management integrated circuit is designed to provide a stable regulated output voltage from input sources that may be above, below, or equal to the desired output voltage. The device automatically transitions between buck and boost operating modes to maintain efficient and continuous power delivery across varying supply conditions. The converter integrates low-resistance power MOSFETs and advanced control circuitry to achieve high conversion efficiency, low quiescent current, and compact implementation. It is widely used in battery-powered systems, portable electronics, embedded devices, industrial control systems, wireless communication equipment, and USB-powered applications requiring stable voltage regulation from fluctuating power sources. The TPS63070RNMT is optimized for applications demanding high power density, extended battery life, and reliable operation under dynamic load conditions. Its compact package and integrated functionality reduce external component count and simplify PCB design for modern power management architectures. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Topology Automatic buck and boost mode operation Input Voltage Characteristics Supports input voltages above, below, or equal to output voltage Output Characteristics Regulated fixed or adjustable DC voltage output Switching Technology Integrated synchronous power MOSFET architecture Efficiency Characteristics High-efficiency power conversion across wide operating conditions Control Architecture Advanced PWM/PFM power regulation control Current Capability Designed for medium-to-high current portable power applications Quiescent Current Low standby current for battery-powered operation Thermal Characteristics Integrated thermal protection and efficient heat management Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type VQFN surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics Portable devices USB-powered systems Industrial automation Embedded systems Wireless communication equipment IoT devices Portable instrumentation Power banks Single-cell battery applications Manufacturer Texas Instruments #commonpartslibrary #powermanagement #buckboostconverter #dcdcconverter #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterymanagement #surfaceountcomponents #electronicsdesign #voltageregulator #industrialelectronics #usbpower

TPS25940ARVCR is an integrated eFuse power protection device from Texas Instruments designed to provide advanced power path management and circuit protection for embedded and industrial electronic systems. The device combines power MOSFET control, inrush current limiting, overcurrent protection, overvoltage protection, and thermal shutdown features into a compact integrated solution for reliable power distribution. This eFuse controller is optimized for hot-swap applications, USB power interfaces, industrial control systems, communication equipment, and embedded platforms requiring controlled power sequencing and fault isolation. It enables safe startup behavior, adjustable current limiting, and fast fault response to protect sensitive downstream circuitry from abnormal operating conditions. The TPS25940ARVCR supports programmable protection thresholds and provides robust system reliability by reducing damage risks caused by short circuits, excessive load current, or transient voltage events. Its compact surface-mount package and high integration level simplify PCB layout and minimize external component requirements in modern power management architectures. #commonpartslibrary #efuse #powermanagement #circuitprotection #texasinstruments #hotswapcontroller #embeddedhardware #powersupply #industrialelectronics #electronicscomponents

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

ESD Protection Devices SMF05CT2G SC-88-6_L2.0-W1.3-P0.65-LS2.1-BR LCSC Part Number: C513065 JLCPCB Part Class: Extended Part Manufactured by onsemi(安森美)

Buck Switching Regulator IC Positive Fixed 5V 1 Output 3A 16-VFQFN Exposed Pad TPS62133RGTT is a synchronous step-down DC-DC buck converter from Texas Instruments designed for high-efficiency power regulation in compact embedded and battery-powered applications. It integrates high-side and low-side MOSFETs and operates with a fixed switching frequency optimized for low EMI and minimal external component count. The device supports wide input voltage operation and delivers stable regulated output voltage with excellent transient response and high conversion efficiency across varying load conditions. This regulator is commonly used in portable electronics, industrial controllers, wireless communication modules, sensor systems, and low-power embedded designs where compact PCB footprint and efficient power conversion are critical. The integrated soft-start, thermal shutdown, overcurrent protection, and power-good monitoring features improve system reliability and simplify power supply implementation. The TPS62133RGTT is housed in a compact QFN package suitable for space-constrained designs and supports operation with ceramic input and output capacitors for improved stability and reduced BOM size. #commonpartslibrary #powermanagement #buckconverter #dcdcconverter #texasinstruments #powersupply #embeddedhardware #lowpowerdesign #industrialelectronics #portableelectronics

ESD Protection Devices SP0503BAHTG SOT-143-4_L2.9-W1.3-P1.92-LS2.4-BL LCSC Part Number: C3040626 JLCPCB Part Class: Extended Part Manufactured by TECH PUBLIC(台舟) Littelfuse SP050xBA TVS diode array family designed for electrostatic discharge (ESD) and transient overvoltage protection of low-voltage signal, control and data lines up to 5VDC. Available in 2, 3, 4, 5 and 6 channel configurations, utilizing avalanche TVS diode technology with low clamping voltage, low off-state capacitance and fast response time below 1ns. Provides IEC 61000-4-2 Level 4 ESD protection up to 30kV air discharge and 30kV contact discharge. Suitable for USB, GPIO, communication interfaces, portable electronics, keyboards, digital cameras, handheld devices and embedded systems. Available in SC70, SOT23, SOT143 and MSOP surface-mount packages. Search Keywords: SP0502BA, SP0503BA, SP0504BA, SP0505BA, SP0506BA, Littelfuse SP0502BA, Littelfuse SP0503BA, Littelfuse SP0504BA, Littelfuse SP0505BA, Littelfuse SP0506BA, SP050xBA, TVS diode array, ESD protection array, multi-channel TVS diode, low capacitance TVS, signal line protection, USB ESD protection, GPIO protection diode, IEC6100042 protection, 30kV ESD protection, transient voltage suppressor array, SC70 TVS diode, SOT23 TVS diode, SOT143 TVS diode, MSOP TVS array Hashtags: #SP0502BA #SP0503BA #SP0504BA #SP0505BA #SP0506BA #SP050xBA #LittelfuseSP0502BA #LittelfuseTVS #TVSDiodeArray #ESDProtection #TransientProtection #SignalLineProtection #USBProtection #GPIOProtection #LowCapacitanceTVS #IEC6100042 #30kVESDProtection #AvalancheTVSDiode #SC70Package #SOT23Package #SOT143Package #MSOPPackage #CircuitProtection #EmbeddedHardware

The 24F 5A250V is a panel-mount cartridge fuse holder designed to securely accommodate and electrically connect cartridge fuses in power distribution and protection circuits. It provides a reliable interface between the fuse element and the electrical system, enabling easy fuse replacement while maintaining electrical safety and mechanical stability. Commonly used in industrial equipment, consumer electronics, power supplies, appliances, instrumentation, and control systems, the fuse holder supports circuit protection against overload and fault conditions while ensuring convenient maintenance and serviceability. Engineering Specification Device Type Panel-Mount Cartridge Fuse Holder Fuse Compatibility Cartridge Fuse Installation and Retention Current Rating Suitable for Low-Voltage Power Protection Applications Voltage Rating Compatible with AC Power Distribution Circuits Mounting Style Panel Mount Connection Method Solder Terminal or Wire Connection Interface Contact Material Conductive Metal Contacts with Corrosion Resistance Housing Material Insulating High-Temperature Polymer Construction Mechanical Characteristics Secure Fuse Retention Easy Fuse Replacement Stable Mechanical Assembly Durable Construction Safety Characteristics Electrical Isolation Support Reliable Contact Performance Overcurrent Protection Interface Safe Fuse Accessibility Environmental Characteristics Long Service Life Resistance to Mechanical Wear Suitable for Commercial and Industrial Environments Applications Power Supplies Industrial Control Equipment Consumer Electronics Electrical Appliances Instrumentation Systems Battery Chargers Test Equipment Automation Systems Distribution Panels Embedded Electronic Devices Features Compact Panel-Mount Design Reliable Electrical Contact Easy Maintenance Access High Mechanical Durability Secure Fuse Retention Mechanism Simple Installation Wide Application Compatibility RoHS Compliant Construction Component Category Fuse Holder #commonpartslibrary #passivecomponents #fuseholder #circuitprotection #overcurrentprotection #powerelectronics #powersupply #industrialelectronics #electricalsafety #panelmount #electroniccomponents #powermanagement #protectioncircuit #controlsystems #applianceelectronics

ESD Protection Devices PESD3V3L1BAF SOD-323_L1.7-W1.3-LS2.5-BI LCSC Part Number: C552512 JLCPCB Part Class: Extended Part Manufactured by Nexperia(安世)

17A 350W 18V 6V 5V SOD-323 ESD and Surge Protection (TVS/ESD) ROHS SD05 SOD-323_L1.8-W1.3-LS2.5-RD LCSC Part Number: C502527 JLCPCB Part Class: Extended Part Manufactured by MDD

ESD Protection Devices PESD5V0S1BAF SOD-323_L1.8-W1.3-LS2.5-BI LCSC Part Number: C552564 JLCPCB Part Class: Extended Part Manufactured by Nexperia(安世)

Overvoltage, Undervoltage Protection PMIC 8-DFN (3x2) The LTC4365IDDB#TRMPBF is a high-reliability overvoltage, undervoltage, and reverse supply protection controller designed to safeguard sensitive electronic systems from abnormal power conditions. It controls an external N-channel MOSFET to disconnect loads during hazardous voltage events, preventing damage caused by input voltage transients, reverse polarity connections, and supply faults. This device is widely used in industrial equipment, telecommunications systems, automotive electronics, embedded control platforms, and power distribution applications where robust input power protection is required. The controller offers precise voltage monitoring, adjustable protection thresholds, low operating current, and fast fault response, enabling reliable operation in harsh electrical environments. Key Features Overvoltage protection controller for DC power inputs Undervoltage lockout protection Reverse input voltage protection Controls external N-channel MOSFET for load isolation Adjustable overvoltage and undervoltage thresholds Wide operating input voltage range Fast fault detection and response Low quiescent current operation Surge and transient voltage protection capability Gate drive suitable for high-side protection configurations Integrated fault monitoring functionality Compact surface-mount package Lead-free and RoHS-compliant construction Electrical Characteristics Input voltage monitoring with programmable thresholds Precise voltage sensing accuracy Reverse polarity protection support Low standby power consumption External MOSFET-based current handling capability High gate drive output for efficient MOSFET control Industrial-grade operating temperature support Applications Industrial automation systems Telecommunications equipment Network infrastructure hardware Automotive electronic modules Battery-powered equipment Embedded control systems Power distribution units Data acquisition systems Medical instrumentation Portable electronic devices Package Information Package Type: DFN Surface-mount technology Compact footprint for space-constrained designs Tape-and-reel packaging for automated assembly Compliance RoHS compliant Lead-free package Industrial-grade reliability Moisture-sensitive device qualified for standard SMT assembly processes #commonpartslibrary #integratedcircuit #analog #powermanagement #powerprotection #surgeprotection #reversepolarityprotection #overvoltageprotection #undervoltageprotection #lineartechnology #analogdevices #industrialelectronics #embeddedsystems #powersupply #circuitprotection

Isolated Module DC DC Converter 1 Output 5V 200mA 4.5V - 5.5V Input The TPS259531DSGR is an integrated eFuse and power protection device manufactured by Texas Instruments. This device is designed to provide advanced protection and power management for low-voltage DC power rails in embedded and industrial electronic systems. It integrates multiple protection features including overcurrent protection, overvoltage protection, inrush current control, thermal shutdown, and short-circuit protection within a compact surface-mount package. The device is optimized for hot-swap applications, USB power distribution, industrial control systems, communication equipment, and power sequencing architectures. Its programmable protection thresholds and controlled startup behavior help improve system reliability while protecting sensitive downstream circuitry from abnormal operating conditions. The TPS259531DSGR is commonly used in power distribution networks requiring intelligent fault management and robust circuit protection. Engineering Specification Device Type Integrated eFuse and power protection IC Protection Functions Overcurrent protection Short-circuit protection Overvoltage protection Thermal shutdown Inrush current control Fault monitoring Input Voltage Characteristics Designed for low-voltage DC power rail protection applications Current Management Programmable current limiting and controlled load startup Power Switching Technology Integrated low-resistance MOSFET switching element Fault Handling Automatic fault response and protection isolation Startup Characteristics Adjustable soft-start and inrush current limiting capability Thermal Characteristics Integrated thermal protection with shutdown functionality Package Type WSON surface-mount package Mounting Style Surface mount technology System Integration Features Hot-swap support and power sequencing compatibility Applications USB power distribution Industrial automation Embedded systems Hot-swap systems Communication equipment Power rail protection Server and storage systems Portable electronics Power management architectures Manufacturer Texas Instruments #commonpartslibrary #efuse #powerprotection #powermanagement #texasinstruments #hotswapcontroller #circuitprotection #embeddedhardware #powerelectronics #powersupply #industrialelectronics #surfaceountcomponents #electronicsdesign #powerdistribution #faultprotection

Buck Switching Regulator IC Positive Adjustable 0.768V 1 Output 2A SOT-23-6 Thin, TSOT-23-6 TPS562201DDCT is a synchronous step-down DC-DC buck converter from Texas Instruments designed for compact and high-efficiency power management applications. The device integrates high-side and low-side MOSFETs to provide efficient voltage conversion with reduced external component requirements, making it suitable for embedded systems, consumer electronics, industrial control modules, and battery-powered devices. This regulator supports wide input voltage operation and delivers stable output regulation with fast transient response and low standby current. Its fixed-frequency switching architecture helps simplify EMI filtering and power supply design while maintaining high conversion efficiency across varying load conditions. The integrated protection features include thermal shutdown, overcurrent protection, undervoltage lockout, and soft-start functionality to enhance overall system reliability. The TPS562201DDCT is packaged in a compact surface-mount form factor optimized for space-constrained PCB layouts and supports the use of ceramic capacitors for low-noise and stable operation. It is widely used in distributed power systems, IoT hardware, communication equipment, and portable embedded electronics requiring reliable low-voltage power rails. #commonpartslibrary #powermanagement #buckconverter #dcdcconverter #texasinstruments #powersupply #embeddedhardware #lowpowerdesign #industrialelectronics #portableelectronics

ESD Protection Devices SM712-TP SOT-23_L2.9-W1.3-P1.90-LS2.4-BR LCSC Part Number: C190787 JLCPCB Part Class: Extended Part Manufactured by MCC(美微科)

7A 150W Bidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHS SM712 SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR LCSC Part Number: C502564 JLCPCB Part Class: Extended Part Manufactured by MDD

SPI Flash Memory with Dual/Quad SPI The W25Q128JV (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. All devices are offered in space-saving packages. The W25Q128JV array is organized into 65,536 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q128JV has 4,096 erasable sectors and 256 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See Figure 2.) The W25Q128JV supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 and I/O3. SPI clock frequencies of W25Q128JV of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories.  New Family of SpiFlash Memories – W25Q128JV: 128M-bit / 16M-byte – Standard SPI: CLK, /CS, DI, DO – Dual SPI: CLK, /CS, IO0, IO1 – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3 – Software & Hardware Reset(1)  Highest Performance Serial Flash – 133MHz Single, Dual/Quad SPI clocks – 266/532MHz equivalent Dual/Quad SPI – 66MB/S continuous data transfer rate – Min. 100K Program-Erase cycles per sector – More than 20-year data retention  Efficient “Continuous Read” – Continuous Read with 8/16/32/64-Byte Wrap – As few as 8 clocks to address memory – Allows true XIP (execute in place) operation  Low Power, Wide Temperature Range – Single 2.7 to 3.6V supply – <1µA Power-down (typ.) – -40°C to +85°C operating range – -40°C to +105°C operating range Flexible Architecture with 4KB sectors – Uniform Sector/Block Erase (4K/32K/64K-Byte) – Program 1 to 256 byte per programmable page – Erase/Program Suspend & Resume  Advanced Security Features – Software and Hardware Write-Protect – Power Supply Lock-Down – Special OTP protection – Top/Bottom, Complement array protection – Individual Block/Sector array protection – 64-Bit Unique ID for each device – Discoverable Parameters (SFDP) Register – 3X256-Bytes Security Registers with OTP locks – Volatile & Non-volatile Status Register Bits  Space Efficient Packaging – 8-pin SOIC 208-mil – 16-pin SOIC 300-mil (additional /RESET pin) – 8-pad WSON 6x5-mm / 8x6-mm – 24-ball TFBGA 8x6-mm (6x4/5x5 ball array) – 24-ball WLCSP – Contact Winbond for KGD and other options #CommonPartsLibrary #IntegratedCircuit #Memory

MAX30003CTI+ QFN-28_L5.0-W5.0-P0.50-TL-EP3.3 LCSC Part Number: C1519515 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信) Analog Devices MAX30003 ultra-low-power single-channel integrated biopotential ECG analog front-end (AFE), designed for wearable ECG and heart-rate applications, includes high-resolution ECG data converter, R-to-R detection, ESD protection, EMI filtering, internal lead biasing, DC leads-off detection, right-leg drive, programmable gain, anti-aliasing filter and calibration functions, 15.5-bit effective resolution with 5µVP-P noise, high CMRR over 100dB, high input impedance over 500MΩ, 85µW power consumption at 1.1V supply, leads-on interrupt and heart-rate interrupt functions, available in 28-pin TQFN and 30-bump WLP packages. Search Keywords: MAX30003, Analog Devices MAX30003, Maxim MAX30003, MAX30003 ECG AFE, MAX30003 biopotential AFE, MAX30003 ECG front end, single channel ECG AFE, wearable ECG AFE, R-to-R detection AFE, heart rate ECG sensor IC, low power ECG IC, biopotential analog front end, MAX30003 TQFN-28, MAX30003 WLP-30, MAX30003 datasheet Hashtags: #MAX30003 #AnalogDevicesMAX30003 #MaximMAX30003 #ECGAFE #BiopotentialAFE #ECGFrontEnd #SingleChannelECG #WearableECG #HeartRateAFE #RtoRDetection #LowPowerECG #AnalogFrontEnd #MedicalSensorIC #BiopotentialSensor #HighCMRR #TQFN28 #WLP30

Amplifier IC Headphones, 2-Channel (Stereo) Class AB 16-WQFN (3x3) The TPA6132A2RTET is a low-power stereo headphone amplifier developed by Texas Instruments for portable and battery-powered audio applications. The device incorporates DirectPath™ technology, eliminating the need for external DC-blocking capacitors while maintaining high audio fidelity and reduced component count. The amplifier supports fully differential as well as single-ended audio inputs, providing improved immunity against system noise and radio-frequency interference. The device is optimized for portable consumer electronics including smartphones, media players, notebook computers, handheld gaming systems, and other compact audio products. Integrated pop and click suppression circuitry minimizes audible transients during startup and shutdown operation, improving user listening experience and protecting connected headphones from unwanted noise. The amplifier provides selectable gain configurations and maintains consistent output performance across a wide operating supply range. Built-in short-circuit protection, thermal shutdown protection, and electrostatic discharge protection enhance system reliability and simplify compliance with industry standards for portable electronic equipment. The TPA6132A2RTET is packaged in a compact surface-mount WQFN package suitable for high-density PCB layouts and space-constrained designs. The device is intended for low-voltage analog audio amplification applications requiring efficient power consumption, low distortion, high power-supply rejection, and capacitor-free headphone drive capability. Key Features DirectPath™ capacitor-free headphone output architecture. Integrated pop and click noise suppression. Differential and single-ended input compatibility. Selectable gain settings. High power-supply noise rejection performance. Improved RF noise immunity. Low quiescent current operation. Short-circuit and thermal-overload protection. ESD-protected outputs. Compact WQFN surface-mount package. Typical Applications Portable audio devices. Smartphones and cellular handsets. Notebook and tablet computers. MP3 and media players. Portable gaming equipment. Battery-powered consumer audio systems. Package Information Package type: WQFN surface-mount package. Mounting type: Surface mount. Manufacturer: Texas Instruments. Part number: TPA6132A2RTET. #commonpartslibrary #integratedcircuit