Electronic Fuse Regulator 5.3A 20-WQFN (3x4) The TPS25940 is a compact, feature-rich eFuse (electronic fuse) power switch from Texas Instruments designed to provide advanced power-path protection and management for SSDs, storage systems, servers, telecom equipment, and other DC-powered applications. It integrates back-to-back MOSFETs for true reverse-current blocking, programmable current limiting, overvoltage/undervoltage protection, and controlled output slew-rate management in a small 20-pin WQFN package. Key Features Wide operating voltage range: 2.7 V to 18 V (20 V maximum input) Low 42 mΩ typical on-resistance (RDS(on)) Adjustable current limit from 0.6 A to 5.3 A True reverse-current blocking using integrated back-to-back FETs Fast reverse-voltage shutdown response of 1 µs Programmable output ramp-up (dV/dt control) for inrush-current management Programmable overvoltage (OVP) and undervoltage (UVP) protection thresholds Integrated IMON analog current-monitor output PGOOD and FLT status outputs for system monitoring Low-power DevSleep™ mode for SATA SSD applications Typical operating quiescent current of 200 µA Typical disabled current of 15 µA Operating junction temperature range from −40°C to +125°C UL 2367 recognized and designed for fault-safe operation under single-point failure conditions. Typical Applications PCIe, SATA, and SAS SSD/HDD storage devices Enterprise servers and storage systems RAID controller cards with holdup-power management Telecom switches and routers Set-top boxes, DTVs, and gaming consoles Adapter-powered equipment General-purpose smart load-switch and power-protection circuits. Package Information Package: 20-pin WQFN (RVC) Temperature range: −40°C to +85°C ambient operation Tape-and-reel packaging for automated assembly. #CommonPartsLibrary #IntegratedCircuit # TPS25940

Current Sense Amplifier 1 Circuit 8-SOIC The INA240A1D is a precision current-sense amplifier manufactured by Texas Instruments, specifically designed for high-side and low-side current measurement applications in electrically noisy environments. The device features enhanced PWM rejection capability, enabling accurate current sensing in motor control systems, switching power supplies, solenoid drivers, and other fast-switching power electronics applications. The amplifier is optimized for measuring voltage drops across shunt resistors while maintaining high common-mode voltage tolerance and excellent signal accuracy. Its bidirectional current-sensing capability allows monitoring of charging and discharging currents in battery systems and power management circuits. The INA240A1D provides fixed gain amplification and high common-mode transient immunity, making it suitable for industrial automation, automotive electronics, embedded power systems, and precision current monitoring applications. The device combines low offset voltage, low drift characteristics, and robust analog performance within a compact surface-mount package, simplifying precision current measurement implementation in modern electronic systems. Engineering Specification Device Type Current-sense amplifier Amplifier Configuration Precision bidirectional current-shunt monitor Input Characteristics High common-mode voltage sensing capability Gain Configuration Fixed-gain current measurement amplifier Measurement Topology High-side and low-side current sensing support Signal Performance High accuracy with low offset voltage and low drift PWM Rejection Enhanced PWM rejection for switching power applications Common-Mode Performance High common-mode transient immunity Output Characteristics Analog voltage output proportional to sensed current Power Consumption Low-power precision analog operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Protection and Reliability Designed for robust operation in electrically noisy environments Applications Motor control systems Battery management systems Switching power supplies Industrial automation Current monitoring Solenoid control Power inverters Embedded power electronics Automotive current sensing Load measurement systems Manufacturer Texas Instruments #commonpartslibrary #currentsenseamplifier #analogfrontend #powermanagement #texasinstruments #motorcontrol #currentsensing #embeddedhardware #industrialelectronics #analogdesign #surfaceountcomponents #powerelectronics #signalconditioning #batterymanagement #precisionanalog

400W SOT-23 ESD and Surge Protection (TVS/ESD) ROHS CDSOT23-SM712 SOT-23_L2.9-W1.3-P1.90-LS2.4-BR LCSC Part Number: C404012 JLCPCB Part Class: Extended Part Manufactured by BOURNS

ESD Protection Devices PESD5V0S1UA,115 SOD-323_L1.8-W1.3-LS2.5-RD LCSC Part Number: C179414 JLCPCB Part Class: Extended Part Manufactured by Nexperia(安世)

DC-DC Converters LMR33630ADDA ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-1 LCSC Part Number: C2866787 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments LMR33630 SIMPLE SWITCHER synchronous step-down DC/DC converter, 3.8V to 36V input voltage range, adjustable output voltage from 1V to 24V, 3A output current, integrated 75mΩ/50mΩ power MOSFETs, peak efficiency above 95%, low 25µA operating quiescent current, selectable switching frequency 400kHz, 1.4MHz or 2.1MHz, 68ns minimum on-time, power-good and precision enable pins, thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit and hiccup short-circuit protection, -40°C to +125°C junction temperature range, available in HSOIC-8 and VQFN-12 packages. Search Keywords: LMR33630, Texas Instruments LMR33630, TI LMR33630, LMR33630 SIMPLE SWITCHER, LMR33630 buck converter, LMR33630 step down converter, LMR33630 synchronous buck, 3A buck converter, 36V buck converter, 3.8V to 36V DC DC converter, adjustable buck converter 1V to 24V, LMR33630 HSOIC-8, LMR33630 VQFN-12, LMR33630 400kHz, LMR33630 2.1MHz, LMR33630 datasheet, industrial buck converter, low EMI buck converter Hashtags: #LMR33630 #TexasInstrumentsLMR33630 #TIBuckConverter #SIMPLESWITCHER #BuckConverter #StepDownConverter #SynchronousBuck #DCDCConverter #3ABuckConverter #36VBuckConverter #AdjustableBuckConverter #LowEMIBuckConverter #IndustrialBuckConverter #PowerGoodConverter #HSOIC8 #VQFN12 #400kHzBuck #21MHzBuck

Authentication Chip 8-UDFN (2x3) The ATECC608B-MAHDA-S is a secure authentication and cryptographic co-processor designed for hardware-based security, device authentication, encrypted communication, and secure key storage in embedded systems and IoT applications. The device integrates advanced cryptographic functionality with protected non-volatile memory to provide a secure root of trust for connected devices. The integrated security engine supports public key cryptography, secure boot validation, message authentication, key generation, digital signatures, and encrypted data exchange. The device is optimized for low-power embedded applications requiring protection against counterfeiting, unauthorized access, firmware tampering, and network-based attacks. The ATECC608B-MAHDA-S supports industry-standard cryptographic algorithms and secure provisioning workflows, enabling secure authentication in cloud-connected systems, industrial automation, consumer electronics, and automotive embedded platforms. The compact surface-mount package and low-power operation make the device suitable for highly integrated embedded designs where hardware security and identity protection are critical requirements. Key Features Hardware-based cryptographic security device Secure key storage and management Integrated authentication engine Public key cryptography support Secure boot and firmware validation capability Digital signature generation and verification Hardware random number generator Encrypted communication support Tamper-resistant key protection Secure provisioning and device identity management Low-power operation for embedded systems I2C serial communication interface Compact surface-mount package IoT and cloud authentication support Electrical Characteristics Secure non-volatile key storage architecture Low operating power consumption Hardware cryptographic acceleration Secure internal key isolation Fast authentication processing capability Wide operating voltage support Industrial temperature operation compatibility High-reliability embedded security implementation Applications IoT device authentication Secure embedded systems Cloud-connected devices Secure boot implementations Firmware integrity verification Industrial automation systems Smart home products Medical electronics Automotive embedded security Asset tracking and identification Anti-counterfeiting systems Encrypted communication platforms Package Information Package Type: SOIC Mounting Type: Surface Mount Compact embedded security package RoHS compliant configuration available #commonpartslibrary #integratedcircuit #securityic #cryptography #iotsecurity #embeddedhardware #authentication #secureboot #hardwaresecurity #encryptedcommunication

The AMS1117-3.3RG is a fixed-output, low-dropout (LDO) linear voltage regulator that provides a regulated 3.3 V output from a higher input voltage. It is capable of delivering up to 1 A output current and is commonly used in microcontroller, communication, and embedded-system power supplies where a stable 3.3 V rail is required. The device includes built-in protection features such as current limiting and thermal shutdown for improved reliability. Key Features Fixed 3.3 V output voltage Supports up to 1 A output current Low dropout voltage, typically around 1.2 V and up to 1.3 V at 1 A load Input voltage capability up to 12 V (some manufacturer variants specify higher absolute maximum ratings) Good line and load regulation Built-in current limiting protection Built-in thermal shutdown protection Available in SOT-223 surface-mount package Suitable for post-regulation of switching power supplies and general 3.3 V power conversion applications Typical Applications ESP32, STM32, and other microcontroller-based systems Embedded and IoT devices Communication modules LCD monitors and display circuits Battery-powered equipment Post-regulation for DC/DC converters Motherboards and expansion cards #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

TPS259621DDAR ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP LCSC Part Number: C2155774 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS2596 eFuse integrated FET hot-swap protection IC, 2.7V to 19V input voltage range, 21V absolute maximum input rating, 0.125A to 2A adjustable current limit, 89mΩ typical on-resistance, accurate current monitor output, active-high enable with adjustable UVLO, fast overvoltage clamp or adjustable OVLO options, adjustable output slew-rate control, overtemperature protection, fault indication pin, IEC 61000-4-4 EFT immunity, -40°C to +125°C junction temperature range, SOIC-8 package. Search Keywords: TPS2596, Texas Instruments TPS2596, TI TPS2596, TPS2596 eFuse, TPS2596 hot swap controller, TPS2596 power protection IC, TPS2596 current limit switch, TPS259620DDA, TPS259621DDA, TPS259630DDA, TPS259631DDA, 2A eFuse, 19V eFuse, 89mOhm eFuse, adjustable current limit eFuse, overvoltage protection eFuse, current monitor eFuse, SOIC-8 eFuse, TPS2596 datasheet Hashtags: #TPS2596 #TexasInstrumentsTPS2596 #TIEFuse #eFuse #HotSwapProtection #PowerProtectionIC #CurrentLimitSwitch #IntegratedFETSwitch #2AeFuse #19VeFuse #89mOhmSwitch #OvervoltageProtection #UVLOProtection #CurrentMonitorIC #FaultIndicator #SOIC8 #TPS259620DDA #TPS259621DDA #TPS259630DDA #TPS259631DDA

555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-PDIP The TLC555 is a CMOS monolithic timing circuit. The timer is fully compatible with CMOS, TTL, and MOS logic and operates at frequencies up to 2MHz. Because of a high input impedance, this device supports smaller timing capacitors than those supported by the NE555 or LM555. As a result, more accurate time delays and oscillations are possible. Power consumption is low across the full range of power-supply voltage. • Very low power consumption: – 1mW typical at VDD = 5V • Capable of operation in astable mode • CMOS output capable of swinging rail to rail • High output current capability – Sink: 100mA typical – Source: 10mA typical • Output fully compatible with CMOS, TTL, and MOS • Low supply current reduces spikes during output transitions • Single-supply operation from 2V to 15V • Functionally interchangeable with the NE555; has same pinout • ESD protection exceeds 1000V per ANSI/ESDA/ JEDEC JS-001 • Available in Q-temp automotive – High-reliability automotive applications – Configuration control and print support – Qualification to automotive standards #CommonPartsLibrary #IntegratedCircuit

Buck Switching Regulator IC Positive Adjustable 0.6V Output 2A SC-74A, SOT-753 The Texas Instruments TLV62569DBVR is a high-efficiency synchronous step-down (buck) DC-DC converter designed for compact and low-power applications. It converts a higher DC input voltage down to a lower, regulated output voltage with high efficiency and small external component size. It is commonly used in portable electronics, embedded systems, routers, set-top boxes, and battery-powered devices where efficient power conversion and small footprint are important. 🔧 Key Features Input voltage range: 2.5 V to 5.5 V Output current capability: up to 2 A Adjustable output voltage: 0.6 V to VIN (via external resistors) High efficiency: up to ~95% Switching frequency: ~1.5 MHz (allows small inductors/capacitors) Synchronous rectification: improves efficiency by reducing losses Power Save Mode (PSM): boosts efficiency at light load Low quiescent current: ~35 µA typical 100% duty cycle support: low dropout operation 🛡️ Protection & Safety Features Overcurrent protection (OCP) Thermal shutdown protection Internal soft-start (reduces inrush current at startup) Power Good (PG) indicator for system monitoring 📦 Package SOT-23-5 (DBVR) Very small footprint for space-constrained PCB designs ⚙️ Typical Applications Point-of-load (POL) power supplies Wireless routers and networking devices Set-top boxes Battery-powered and portable systems Embedded controllers and IoT devices

20.1A 400W 19.9V 13.3V 12V SMA(DO-214AC) ESD and Surge Protection (TVS/ESD) ROHS SMAJ12CA SMA_L4.4-W2.6-LS5.0-BI LCSC Part Number: C499826 JLCPCB Part Class: Extended Part Manufactured by SHIKUES(时科)

The SMBJ6.8CA is a bidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from voltage transients caused by electrostatic discharge, lightning-induced surges, inductive load switching, and other transient events. It is commonly used in power supplies, communication interfaces, industrial control systems, automotive electronics, and consumer devices requiring robust overvoltage protection. The device utilizes avalanche breakdown technology to rapidly clamp transient voltages to safe levels, helping prevent damage to downstream components. Its bidirectional configuration makes it suitable for protecting AC lines and signal lines where voltage polarity may reverse. The SMB package provides a compact surface-mount solution with high surge-handling capability and excellent reliability for demanding environments. Features Bidirectional transient voltage suppression diode Fast response time to transient events High peak pulse power dissipation capability Low incremental surge resistance Excellent clamping performance Surface-mount SMB package Protection against ESD and lightning-induced surges Suitable for AC and bidirectional signal line protection RoHS-compliant and halogen-free options available from various manufacturers High reliability and long operational life Electrical Characteristics Reverse standoff voltage optimized for low-voltage applications Avalanche breakdown protection mechanism High peak surge current capability Low leakage current during normal operation Bidirectional voltage clamping characteristics Designed for transient suppression in accordance with industry surge standards Applications Power input protection Communication interfaces Industrial automation equipment Automotive electronic modules Consumer electronics Data and signal line protection Telecom equipment Embedded control systems Sensor interface protection Package Information Package Type: SMB (DO-214AA) Surface-mount technology Compact footprint for PCB integration Suitable for automated assembly processes #commonpartslibrary #semiconductor #tvsdiode #esdprotection #surgeprotection #circuitprotection #transientvoltagesuppressor #powerprotection #electronics #surfaceMountDevice #automotiveelectronics #industrialelectronics

Buck-Boost Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A (Switch) 14-VFDFN Exposed Pad The TPS63020DSJT is a high-efficiency synchronous buck-boost DC-to-DC converter manufactured by Texas Instruments. This integrated power management device is designed to provide a stable regulated output voltage from input power sources that may vary above or below the desired output level. The converter automatically transitions between buck and boost operating modes to maintain efficient and continuous voltage regulation across a wide input range. The device integrates low-resistance power MOSFETs, advanced control circuitry, and high-efficiency switching architecture to minimize power loss and optimize battery utilization in portable electronic systems. It is widely used in battery-powered applications, embedded systems, wireless communication devices, portable instrumentation, industrial electronics, and USB-powered hardware requiring compact and reliable voltage regulation. The TPS63020DSJT is optimized for systems powered by single-cell lithium-ion, lithium-polymer, or multi-cell alkaline battery configurations. Its compact package and integrated functionality reduce external component count and simplify PCB layout while delivering high power conversion efficiency and low quiescent current performance. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Conversion Topology Automatic buck and boost regulation architecture Input Characteristics Supports input voltages above or below regulated output voltage Output Characteristics Stable regulated DC voltage output Switching Technology Integrated synchronous MOSFET switching architecture Efficiency Characteristics High-efficiency power conversion for battery-powered systems Control Features Automatic operating mode transition and load regulation Power Consumption Low quiescent current operation for portable electronics Thermal Characteristics Integrated thermal management and protection features Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type WSON surface-mount package Mounting Style Surface mount technology Applications Portable electronics Battery-powered systems Embedded hardware Wireless communication devices USB-powered electronics Industrial control systems Portable instrumentation IoT devices Consumer electronics Power management systems Manufacturer Texas Instruments #commonpartslibrary #buckboostconverter #dcdcconverter #powermanagement #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterypowered #surfaceountcomponents #electronicsdesign #voltageregulator #iothardware #industrialelectronics

Tiny, Low-Cost, PCM Class D Amplifier with Class AB Performance The MAX98357AETE+T is a highly integrated digital input Class-D audio amplifier designed to convert digital audio streams directly into high-efficiency speaker output signals. It features an integrated digital-to-analog conversion stage and Class-D output driver, eliminating the need for an external DAC and significantly simplifying audio system design. The device accepts digital audio data through a standard I²S interface and delivers high-quality audio output suitable for portable electronics, smart speakers, embedded systems, Internet of Things devices, multimedia products, and consumer audio equipment. Its high-efficiency architecture minimizes power dissipation while maintaining excellent audio performance, making it particularly suitable for battery-powered applications. The MAX98357AETE+T incorporates advanced audio processing capabilities, low electromagnetic interference characteristics, and integrated protection features to ensure reliable operation in compact embedded audio designs. Features Digital input Class-D audio amplifier Integrated digital-to-analog conversion functionality Direct I²S audio interface support High-efficiency power amplification architecture Filterless output design Compact surface-mount package Low electromagnetic interference operation Integrated click-and-pop suppression Low power consumption High audio fidelity performance Simplified external component requirements Integrated thermal protection Short-circuit protection capability Suitable for mono speaker applications Optimized for embedded audio systems Electrical Characteristics Digital audio input architecture Class-D switching amplifier topology High-efficiency power conversion Low distortion audio reproduction Wide operating supply range Low standby power consumption Direct speaker drive capability Integrated audio signal processing functions Applications Smart speakers Embedded audio systems Internet of Things devices Portable electronics Voice-enabled products Multimedia equipment Consumer audio devices Wireless audio products Home automation systems Educational and development platforms Battery-powered audio applications Human-machine interface systems Package Information TQFN surface-mount package Compact footprint for space-constrained designs Suitable for automated PCB assembly Thermally optimized package construction High-density electronic product integration #commonpartslibrary #integratedcircuit #audio #audioamplifier #classd amplifier #digitalaudio #i2s #dac #embeddedaudio #consumerelectronics #iot #multimedia #signalprocessing #powermanagement #maximintegrated #analogdevices #electronicsdesign #audioelectronics #speakerdriver #embeddedsystems

5A 8.8V 17W 5.5V Bidirectional 3.6V USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHS TPD4E02B04DQAR USON-10_L2.5-W1.0-P0.50-BL LCSC Part Number: C106794 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

DIODE SCHOTTKY 100V SMA(DO-214AC) The SS310 is a 3.0A Surface-Mount Schottky Barrier Rectifier designed for high-efficiency power conversion and protection applications. It features a low forward voltage drop and fast switching characteristics, making it suitable for DC-DC converters, switching power supplies, freewheeling diodes, polarity protection circuits, and high-frequency rectification applications. The device is commonly available in an SMC/DO-214AB surface-mount package and typically offers a maximum repetitive reverse voltage of 100V. Key Features 3.0A average forward current capability 100V maximum repetitive reverse voltage (VRRM) Schottky barrier technology for low forward voltage drop Low power loss and high efficiency High surge current capability Fast switching speed Suitable for high-frequency applications Surface-mount package for automated assembly High-temperature soldering capability (260°C / 10 s) RoHS compliant and halogen-free variants available from some manufacturers Typical Applications Switching power supplies (SMPS) DC-DC converters Battery-powered devices Reverse polarity protection Freewheeling and flyback circuits Power management systems High-frequency rectification #SS310 #SchottkyDiode #Rectifier #PowerElectronics #SMPS #DCDCConverter #LowForwardVoltage #SurfaceMount #HighEfficiency #CircuitProtection #ElectronicsDesign #PCBDesign

ESD Protection Devices 0603ESDA-MLP7 D0603-BI LCSC Part Number: C328933 JLCPCB Part Class: Extended Part Manufactured by BUSSMANN

Three-Terminal Fixed Positive Voltage Regulator The LM7812T is a three-terminal fixed positive linear voltage regulator IC designed to provide a stable +12V DC output from a higher input voltage source. It belongs to the widely used 78xx series regulators, where “12” indicates the fixed output voltage of 12 volts. It is commonly used in power supply circuits, embedded systems, and electronic devices that require a simple, reliable regulated 12V rail without the complexity of external components. The device operates as a linear regulator, meaning it reduces voltage by dissipating excess energy as heat, so proper heatsinking is often required for higher current loads. Key Features of LM7812T Fixed +12V output voltage Output current up to 1A–1.5A (depending on package and cooling) Input voltage range up to ~35V max Built-in thermal shutdown protection Internal current limiting and short-circuit protection Safe-area compensation for reliable operation No external components required for basic operation Good line and load regulation Low quiescent current (~8 mA typical) Available in TO-220 / TO-3 packages (LM7812T variants) Typical Applications DC power supplies (12V regulated rail) Arduino and microcontroller systems Industrial control electronics Sensor and communication circuits Battery-powered systems requiring stable 12V Audio amplifiers and small motor control circuits #CommonPartsLibrary #IntegratedCircuit #PowerManagement

FUSE BRD MNT 2A 2410 24F 2A250V is a surface-mount ceramic fast-acting fuse designed for overcurrent and short-circuit protection in electronic equipment. It is commonly used in power supplies, household appliances, instruments, displays, communication equipment, and other low-power electronic circuits. The fuse opens quickly when excessive current flows, helping protect sensitive components from damage. Key Features Rated Current: 2A Rated Voltage: 250V AC Fuse Type: Fast-acting (Quick Blow) Construction: Ceramic tube fuse Mounting Type: Surface Mount (SMD) Package Size: Approximately 6.1 mm × 2.6 mm × 2.6 mm Breaking Capacity: 35A @ 250VAC RoHS Compliant Provides overcurrent and short-circuit protection Suitable for power supplies, electronic instruments, displays, communication devices, and household appliances Typical Applications AC/DC power supplies Consumer electronics LCD monitors and displays Home appliances Communication equipment Industrial electronic control circuits #CommonPartsLibrary #fuse

TVS DIODE 5VWM 9.2VC SOD-123FL The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when compare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry • 200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% •Compatible with industrial standard package SOD-123FL • Low profile: maximum height of 1.1mm. • Low inductance, excellent clamping capability • For surface mounted applications to optimize board space • High temperature to reflow soldering guaranteed: 260°C/430sec • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Fast response time: typically less than 1.0ns from 0 Volts to VBR min • Glass passivated junction • Built-in strain relief • Plastic package is flammability rated V-0 per UL 94 • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen-free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01) • UL Recognized to UL 497B as an Isolated Loop Circuit Protector. #CommonPartsLibrary #Diode

ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit 480MHz 2MB (2M x 8) FLASH 100-LQFP (14x14) # STM32H743VIT6 ## General Description The STM32H743VIT6 is a high-performance microcontroller manufactured by STMicroelectronics and based on the Arm Cortex-M7 core. It is designed for advanced embedded applications requiring exceptional processing capability, extensive peripheral integration, high-speed memory access, and real-time control performance. The device combines powerful computational resources, floating-point processing, digital signal processing capabilities, large embedded memory, and a comprehensive set of communication interfaces within a compact package. Its architecture is optimized for industrial automation, motor control, human-machine interfaces, medical devices, robotics, data acquisition systems, audio processing, edge computing, and high-performance IoT applications. ## Key Features ### Processing Architecture * Arm Cortex-M7 processor core * High-performance real-time processing capability * Floating-point unit support * Digital signal processing functionality * Advanced instruction set architecture * Optimized embedded computing performance ### Memory Resources * Embedded Flash memory * High-speed SRAM architecture * Memory protection support * Efficient code and data execution * High-bandwidth memory access capability * Advanced cache architecture ### Communication Interfaces * USART and UART communication interfaces * SPI communication interfaces * I²C communication interfaces * CAN communication support * USB connectivity capability * Ethernet networking support * SDMMC storage interface support * Flexible external communication options ### Analog Features * High-resolution analog-to-digital conversion * Digital-to-analog conversion capability * Precision signal acquisition * Analog monitoring functionality * Sensor interface compatibility ### Timer and Control Features * Advanced control timers * General-purpose timers * PWM signal generation * Encoder interface support * Motor-control functionality * Real-time clock integration * Event-driven control architecture ### Multimedia and Processing Capabilities * Audio processing support * Signal processing applications * Graphics and display interface support * High-speed data acquisition capability * Real-time analytics support * Edge computing functionality ### Power Characteristics * Optimized performance-to-power ratio * Multiple low-power operating modes * Dynamic power management support * Efficient embedded system operation ### Package Characteristics * Surface-mount package construction * Industrial-grade packaging * High-pin-count peripheral integration * Automated assembly compatible * Suitable for complex embedded designs ### Material Construction * Advanced semiconductor technology * RoHS-compliant materials * Lead-free package construction * High-reliability integrated circuit design ### Environmental Characteristics * Suitable for industrial and commercial environments * Long operational service life * Reliable continuous operation * Stable performance across operating conditions * Robust embedded processing platform ### Application Areas * Industrial Automation Systems * Robotics and Motion Control * Motor Drive Applications * Human-Machine Interfaces * Medical Equipment * Audio Processing Systems * Data Acquisition Equipment * Embedded Computing Platforms * Industrial Networking Devices * Edge Computing Solutions * Smart Energy Systems * Advanced IoT Devices * Test and Measurement Equipment * Consumer Electronics ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade High-Performance Microcontroller Solution ## Manufacturer STMicroelectronics ## Product Family STM32H7 High-Performance Microcontroller Series #STM32H743VIT6 #STM32H7 #STMicroelectronics #CortexM7 #Microcontroller #EmbeddedSystems #IndustrialAutomation #MotorControl #Robotics #EdgeComputing #IoT #DataAcquisition #EmbeddedDesign #FirmwareDevelopment #ElectronicsEngineering

ESD Protection Devices PESD2CANFD24V-TR SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR LCSC Part Number: C552486 JLCPCB Part Class: Extended Part Manufactured by Nexperia(安世)

ESD Protection Devices TPD4E1U06DBVR SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C124691 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

8.3A 400W 48.4V 33.3V 30V SMA(DO-214AC) ESD and Surge Protection (TVS/ESD) ROHS SMAJ30CA SMA_L4.4-W2.6-LS5.0-BI LCSC Part Number: C719140 JLCPCB Part Class: Extended Part Manufactured by SHIKUES(时科)