USB to Serial Interface, SSOP-28 FTDI USB Serial SSOP*5.3x10.2mm*P0.65mm* The FT232RL is a full-speed USB 2.0 to asynchronous serial data transfer IC. It integrates all the necessary USB protocol handling and UART interface logic, making it very easy to add USB connectivity to embedded devices without requiring complex firmware development. It is commonly used in development boards (like Arduino clones), USB-to-TTL converters, and debugging interfaces. Key Features USB Interface Fully compliant with USB 2.0 Full-Speed (12 Mbps) Integrated USB transceiver (no external components required) Supports USB suspend/resume modes Internal EEPROM for storing USB descriptors (no external EEPROM needed) Serial (UART) Interface Supports standard UART communication (TX, RX) Configurable baud rates from 300 bps up to 3 Mbps Supports hardware flow control (RTS/CTS, DTR/DSR) Bit-bang mode for simple GPIO control Integrated Components Built-in clock generator (no external crystal required) Internal EEPROM for configuration Integrated voltage regulator (3.3V output available for external use) Power Features Operates from 3.3V to 5V Can be powered directly from USB (bus-powered) Low power consumption with sleep mode Driver Support Virtual COM Port (VCP) drivers available for: Windows Linux macOS Also supports direct D2XX driver for advanced applications Package Typically available in SSOP-28 package Common Applications USB-to-serial converters (TTL/RS232) Microcontroller programming and debugging Embedded system communication Industrial and instrumentation interfaces

NAND Flash 3.3V 2Gb 24nm SLC NAND (EEPROM) FLASH - NAND (SLC) Memory IC 2Gbit Parallel 25 ns 67-VFBGA (6.5x8) The TC58NVG1S3HBAI6 is a 2-Gbit (256M × 8) SLC NAND flash memory device originally developed by Toshiba (now Kioxia). It is a CMOS-based, electrically erasable and programmable read-only memory (EEPROM) used to store data even when power is removed. This device uses Single-Level Cell (SLC) NAND technology, which offers high reliability, fast access time, and long endurance, making it suitable for industrial and embedded systems. Key Characteristics Memory Type: NAND Flash (Non-volatile) Technology: SLC (Single-Level Cell) Density: 2 Gbit (256M × 8 organization) Interface: Parallel I/O Supply Voltage: 2.7 V – 3.6 V Access Time: ~25 ns Package: 67-ball VFBGA (compact surface-mount) Functional Overview Organized into pages and blocks (typical NAND structure) Supports operations such as: Read Page program (write) Block erase Copy-back operations Uses shared I/O pins for address, data, and command input/output Internally, data is transferred between the memory array and internal registers in page-sized chunks (~2176 bytes including spare area). Typical Applications Embedded systems storage Firmware and boot memory Industrial control systems Data logging devices Consumer electronics (e.g., cameras, audio storage) #CommonPartsLibrary #IntegratedCircuit #memory #TC58NVG1

5V Data line protection ESD USB SOIC*3.9x4.9mm*P1.27mm*

The VL6180X, a product from STMicroelectronics, is a cutting-edge optical module that integrates proximity sensing, ambient light sensing (ALS), and a VCSEL (Vertical Cavity Surface Emitting Laser) light source into a single, compact package. This module leverages ST's patented FlightSense technology to deliver fast, accurate distance ranging capabilities, measuring absolute range up to and beyond 10 cm, independent of the object's reflectance. Designed for easy integration into a wide range of applications, from smartphones and portable devices to industrial and domestic appliances, the VL6180X offers features such as gesture recognition, high dynamic range ambient light sensing, and cross-talk compensation for cover glass. It supports various operating modes, including single-shot and continuous measurements, with control and data retrieval facilitated through an I2C interface. The module's low power operation, combined with its ability to perform ranging and ALS measurements automatically at predefined intervals, makes it a versatile solution for developers looking to incorporate reliable proximity detection and light level measurement into their projects.

The Texas Instruments CD54/74HC157 and CD54/74HCT157 series, along with the CD54/74HC158 and CD54/74HCT158 series, are high-speed CMOS logic quad 2-input multiplexers renowned for their reliability and versatility in selecting four bits of data from two sources under the command of a common Select input (S). These components are unique in their provision of separate Enable inputs and their capability to offer buffered inputs and outputs, ensuring robust performance across a wide operating temperature range of -55℃ to 125ºC. The series affords a standard output that can drive up to 10 LSTTL loads and a bus driver output capable of driving up to 15 LSTTL loads, highlighting their adaptability in a multitude of digital interfacing applications. With an emphasis on functional excellence and energy efficiency, these multiplexers significantly reduce power consumption compared to LSTTL logic ICs, making them a preferred choice for energy-sensitive applications. The 'HC types support 2V to 6V operations, offering high noise immunity, while the 'HCT versions are designed for 4.5V to 5.5V operations with direct LSTTL input logic compatibility, signifying their flexibility in interfacing with varied logic families. Whether used in data routing applications, for moving data between groups of registers, or as function generators, the CD54/74HC157, CD54/74HCT157, CD54/74HC158, and CD54/74HCT158 series from Texas Instruments stand out for their functional versatility, superior performance, and power efficiency across a comprehensive range of electrical engineering and digital design scenarios.

The 74HC164 and 74HCT164 from Nexperia are 8-bit serial-in, parallel-out shift registers designed for a wide array of applications ranging from signal processing to data management systems. These components feature two serial data inputs (DSA and DSB) and eight parallel data outputs (Q0 to Q7), supporting versatile data handling by allowing serial data entry through either input pin. They operate on a supply voltage range of 2.0 to 6.0 V, ensuring compatibility with both CMOS and TTL levels—specifically, the 74HC164 operates at CMOS level while the 74HCT164 is designed for TTL level inputs. Key functionalities include gated serial data inputs, an asynchronous master reset for clearing the register, and a clock input that triggers data shifting on LOW-to-HIGH transitions. Manufactured by Nexperia, a leader in semiconductor solutions, these components exhibit high noise immunity and low power dissipation, making them ideal for high-reliability applications. Furthermore, they come in a variety of packages including SO14, TSSOP14, and DHVQFN14, catering to diverse design requirements. The 74HC164 and 74HCT164 are specified to operate in a broad temperature range, ensuring reliable performance in both commercial and industrial environments. With ESD protection exceeding 2000 V according to the HBM JESD22-A114F and MM JESD22-A115-A standards exceeding 200 V, these shift registers offer a robust solution for serial-to-parallel data conversion needs.

Data Acquisition System (DAS), ADC 14 b 48k MICROWIRE™, QSPI™, Serial, SPI™ 28-SSOP #CommonPartsLibrary #IntegratedCircuit #DataAcquisition #ADCs/DACs #ADS7871

Digital Potentiometer 100k Ohm 4 Circuit 129 Taps SPI Interface 20-TSSOP #CommonPartsLibrary #IntegratedCircuit #Data-Acquisition #Digital-Potentiometer #WiperLock™

Digital Potentiometer 10k Ohm 1 Circuit 256 Taps SPI Interface 8-SOIC #CommonPartsLibrary #IntegratedCircuit #DataAcquisition #DigitalPotentiometer #MCP41010

DAC, Audio 16 b, 24 b, 32 b 384k PCM 20-TSSOP #CommonPartsLibrary #IntegratedCircuit #ADCs #DACs #Data-Acquisition #PCM5102

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Board Edge, Cutout; Surface Mount; Through Hole, Right Angle This component is a precision electronic device designed for integration into a wide range of circuit applications. It provides reliable electrical and mechanical performance while maintaining compatibility with standard PCB assembly processes. The device is intended for use in systems requiring stability, durability, and consistent operation across varying environmental conditions. Key Features High reliability and stable operation Compact, industry-standard footprint Compatible with automated assembly processes Lead-free and environmentally compliant Designed for long-term use Applications Consumer electronic devices Industrial control equipment Embedded systems and controllers Power and signal management circuits General-purpose electronic assemblies Electrical Characteristics (Typical – verify with manufacturer datasheet) Voltage rating: To be specified Current rating: To be specified Power rating: To be specified Tolerance or accuracy: To be specified Relevant electrical parameter (resistance, impedance, gain, etc.): To be specified Mechanical Characteristics Package type: To be specified Mounting method: Surface mount or through-hole Dimensions: To be specified Terminal style: To be specified Environmental Specifications Operating temperature range: Typically suitable for standard industrial conditions Storage temperature range: Extended range for safe storage Humidity tolerance: Suitable for non-condensing environments Compliance and Standards Compliant with environmental regulations Compatible with industry manufacturing standards #commonpartslibrary #connector #usb #typec

ADC, Audio 24 b 216k DSP, PCM 28-SSOP #CommonPartsLibrary #IntegratedCircuit #DataAcquisition #ADC

12 Bit Digital to Analog Converter 2 14-SOIC #MCP4922TESL #Microchip #IntegratedCircuit #DataAcquisition #DigitalToAnalogConverter #DAC #DualChannelDAC #12BitDAC #SPIDAC #SPIInterface #VoltageOutputDAC #SurfaceMount #SOIC14 #CategoryIntegratedCircuits #CategoryDataAcquisition #CategoryDigitalToAnalogConverters #CommonPartsLibrary

16 Bit Digital to Analog Converter 1 10-VSSOP #CommonPartsLibrary #IntegratedCircuit #DataAcquisition #DAC

Audio D/A Converter ICs 2VRMS DirectPath Aud io Stereo DAC 20-TSSOP The PCM5102AQPWRQ1 specification defines the engineering requirements for an automotive-grade digital-to-analog audio converter integrated circuit intended for high-performance digital audio applications. The specification establishes the functional, electrical, mechanical, thermal, and quality requirements necessary to ensure reliable conversion of digital audio signals into high-fidelity analog outputs. It serves as the governing technical reference for component selection, system integration, manufacturing, verification, and quality assurance throughout the product lifecycle. The device is designed to provide high-resolution audio performance with low distortion, low noise, and stable operation under automotive environmental conditions. It is suitable for use in infotainment systems, digital audio processing equipment, communication systems, and other embedded electronic applications requiring reliable digital-to-analog signal conversion. Engineering Requirements The component shall be manufactured using qualified semiconductor fabrication processes and approved materials to ensure consistent electrical performance, mechanical integrity, and long-term reliability. The device shall comply with applicable automotive qualification requirements and maintain stable operation within its specified voltage, temperature, and environmental operating ranges. Electrical performance shall meet the specified requirements for signal integrity, dynamic range, total harmonic distortion, noise performance, and output accuracy. The package shall be compatible with standard surface-mount assembly processes and shall withstand soldering and handling conditions without degradation. Workmanship shall be free from physical defects, contamination, package damage, or manufacturing irregularities that could affect functionality or reliability. Inspection, testing, and validation shall be performed using calibrated equipment and controlled procedures to verify compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approved change authorization prior to implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, qualification reports, material declarations, inspection records, manufacturing documentation, and revision-controlled technical files. All documentation shall be maintained in accordance with established engineering configuration management and quality control procedures. Revision Control Changes to this specification shall be managed through the formal engineering change control process. All revisions shall undergo technical review, validation, and approval to ensure continued compliance with design intent, automotive quality standards, and applicable regulatory requirements. #EngineeringSpecification #AutomotiveElectronics #DigitalToAnalogConverter #AudioEngineering #EmbeddedSystems #QualityAssurance #Semiconductor #EngineeringDocumentation #Compliance #CommonPartsLibrary #IntegratedCircuit #Data-Acquisition #ADCs #DACs #PCM5102