1/1 Transceiver Half CANbus 8-SOIC #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #65HVD230

I/O Expander 16 I²C I2C, SMBus 400 kHz 24-TSSOP #interface #CommonPartsLibrary

Bus Switch 1 x 8:1 24-TSSOP #CommonPartLibrary #IntegratedCircuits #Interface #I/O Expanders #TCA9535

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" speaker terminal block 2 pin 5.08mm AK300/3 KF301-2P 5.08mm The 277-1247-ND connector is an electronic interconnect component intended for establishing reliable electrical connections between conductors or between a conductor and a printed circuit assembly. It is designed for ease of installation, secure retention, and consistent electrical performance in low- to moderate-power applications. The connector supports efficient wiring configurations while maintaining mechanical stability and minimizing contact resistance. It is suitable for use in prototyping, industrial assemblies, and general-purpose electronic systems where dependable connectivity and repeatable termination are required. Engineering Specification The connector shall provide a stable electrical interface capable of maintaining low contact resistance under specified operating conditions. It shall be constructed from materials that ensure adequate conductivity, corrosion resistance, and mechanical durability over its intended service life. The housing shall be fabricated from an insulating material with sufficient ताप resistance and dielectric strength to prevent electrical leakage or shorting during normal operation. The contact mechanism shall support secure wire or terminal engagement, preventing accidental disconnection due to vibration or handling. The connector shall accommodate compatible wire gauges within its rated range and ensure proper clamping or retention without causing conductor damage. Electrical ratings shall align with standard low-voltage applications, including defined limits for current and voltage handling. Mechanical dimensions shall conform to manufacturer-defined tolerances to ensure compatibility with mating components or mounting interfaces. The connector shall be designed for straightforward installation using common tools or manual insertion methods, depending on its termination style. Environmental performance shall include resistance to typical ambient conditions such as humidity and moderate temperature variation, without degradation of electrical or mechanical properties. The connector shall meet applicable industry standards for safety and performance where relevant. #CommonPartsLibrary #Connector #COMBICON MKDSN

I/O Expander 16 I²C 28-SSOP #CommonPartLibrary #IntegratedCircuits #Interface #I/O Expanders #MCP23017

Humidity, Pressure, Temperature 0 ~ 100% RH I²C, SPI ±3% 1 s Surface Mount BME280 I2C breakout module The BME280 integrates three sensors—temperature, relative humidity, and pressure—along with a high-performance digital interface. It communicates via I²C or SPI, making it easy to interface with microcontrollers like Arduino, ESP32, and STM32. It is designed for low power consumption, making it suitable for battery-powered applications such as portable weather stations and smart home devices. Key Features Environmental Sensing Measures: Temperature Relative Humidity Barometric Pressure Enables altitude estimation based on pressure readings High Accuracy Temperature: ±1.0°C (typical) Humidity: ±3% RH (typical) Pressure: ±1 hPa (typical) Low Power Consumption Typical current: ~0.6 µA (sleep mode) ~3.6 µA (measurement mode) Ideal for battery-operated devices Communication Interfaces Supports: I²C (up to 3.4 MHz) SPI (3-wire / 4-wire) Easy integration with most microcontrollers Compact Package Small footprint: 2.5 × 2.5 × 0.93 mm LGA package Suitable for space-constrained designs Built-in Features Factory-calibrated coefficients stored in NVM Configurable oversampling and filtering Integrated ADC for high-resolution measurements #commonpartslibrary #sensor #humidity #pressure

Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) The TMP117AIDRVR is a high-precision digital temperature sensor manufactured by Texas Instruments. The device provides accurate temperature measurements through an I²C-compatible digital interface and is optimized for applications requiring medical-grade accuracy, low power consumption, and compact PCB footprint. The sensor integrates a precision temperature sensing element, analog-to-digital converter, calibration memory, and digital interface into a single compact package. The device supports continuous conversion and shutdown operating modes, enabling efficient thermal monitoring in battery-powered and always-on systems. Internal calibration minimizes external component requirements while providing highly linear and repeatable temperature measurements across an extended operating range. The TMP117AIDRVR is commonly used in industrial controls, wearable electronics, healthcare equipment, environmental monitoring systems, battery management systems, consumer electronics, and precision instrumentation. Electrical Characteristics Supply voltage supports low-voltage digital systems and portable electronics applications. Ultra-low operating current enables long battery life in energy-sensitive designs. Integrated EEPROM allows programmable offset correction and configuration storage. Digital output eliminates the need for external ADC circuitry. High measurement resolution supports precision thermal monitoring applications. Low self-heating characteristics improve measurement stability and accuracy. Functional Features High-accuracy digital temperature sensing. I²C and SMBus compatible communication interface. Programmable alert functionality for thermal threshold monitoring. Continuous conversion and low-power shutdown operating modes. Integrated non-volatile memory for user configuration storage. Wide operating temperature range for industrial and commercial environments. Fast conversion timing suitable for real-time monitoring systems. Factory-calibrated performance requiring minimal external calibration. Package Information Package type is WSON with compact surface-mount footprint suitable for dense PCB layouts. Moisture-sensitive package designed for automated assembly processes. Lead-free and RoHS-compliant construction. Typical Applications Medical thermometers and patient monitoring systems. Industrial temperature monitoring equipment. Battery-powered portable electronics. HVAC and environmental sensing systems. Data acquisition and instrumentation systems. Server and embedded thermal management applications. Consumer electronics requiring precision thermal sensing. #commonpartslibrary #integratedcircuit #temperaturesensor

MCP23017 Series 5.5 V 1.7 MHz SMT 16-Bit I2C I/O Expander - SOIC-28 #CommonPartLibrary #IntegratedCircuits #Interface

Cellular EDGE, GPRS, GSM, HSPA+, LTE, UMTS Transceiver Module 900MHz, 1.8GHz Antenna Not Included Surface Mount The SIM7600E-H is a multi-mode LTE module that supports: LTE (4G) Cat-4 with up to 150 Mbps download / 50 Mbps upload 3G (UMTS/HSPA+) 2G (GSM/GPRS/EDGE) fallback for global network compatibility It is built in a compact SMT/LCC package (about 30 × 30 mm) and is widely used for embedded devices that need mobile internet and GNSS positioning Key Features Network support LTE-FDD / LTE-TDD (global bands depending on variant) UMTS/HSPA+ GSM/GPRS/EDGE fallback Data speed LTE Cat-4: up to 150 Mbps downlink 3G/2G fallback for lower-speed connectivity GNSS built-in GPS / GLONASS / other satellite positioning support Interfaces USB 2.0 UART GPIO I2C ADC PCM (audio support) SIM card interface Software / protocols AT command control TCP/IP, UDP, HTTP, HTTPS, FTP, DNS Driver support for Windows, Linux, Android Power supply ~3.4V to 4.2V typical operating range Operating temperature -40°C to +85°C (industrial grade) Typical Applications IoT devices GPS trackers Smart metering Industrial routers / gateways Remote monitoring systems Vehicle telematics Point-of-sale terminals #commonpartslibrary #rf #wireless #transceiver #module

Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-103-07-G-D is a through-hole, dual-row (2×3) male pin header from the TSW series of Samtec. It is designed for board-to-board or cable-to-board interconnections, using a standard 2.54 mm (0.1″) pitch, making it widely compatible with common PCB layouts and prototyping systems. This connector features gold-plated square posts for reliable electrical contact and durability, and is commonly used in embedded systems, development boards, and general electronics applications. Key Features Connector Type: Male pin header (unshrouded) Number of Positions: 6 pins (2 rows × 3 pins) Pitch: 2.54 mm (0.100″) standard spacing Mounting Type: Through-hole soldering Contact System: 0.025″ (0.635 mm) square post Contact Material: Phosphor bronze with gold plating Orientation: Vertical (straight) Row Spacing: 2.54 mm Operating Temperature: −55 °C to +125 °C Insulator Material: PBT (UL94 V-0 rated) Typical Use: Board-to-board or cable interface AVR ISP 2x3 2.54mm header #commonpartslibrary #connector #header