ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller

ARM Microcontrollers - MCU ARM M4 1024 FLASH 168 Mhz 192kB SRAM 100-LQFP (14x14) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of Flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop and Standby modes –VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #CommonPartsLibrary #IntegratedCircuit #Microcontroller #STM32F407

ARM Microcontrollers - MCU Ultra-low-power FPU Arm Cortex-M4 MCU 80 MHz 1 Mbyte of Flash LCD, USB OTG, DFSD 64-LQFP (10x10)

32-Bit MCU+FPU 1M Flash USB LCD TFBGA216 STMicroelectronics STM32F746NGH6, 32bit ARM Cortex M7 Microcontroller, 216MHz, 1024 kB Flash, OTP, 216-Pin TFBGA

Linear Voltage Regulator IC Positive Fixed 1 Output 1A SOT-223-3 General Description The AP2114H-3.3TRG1 is a low dropout linear voltage regulator designed to provide a stable fixed output voltage for low-noise and power-sensitive electronic applications. The device is optimized for high current capability, low quiescent current operation, and reliable thermal performance. It is suitable for portable electronics, embedded systems, communication equipment, consumer devices, and industrial control applications where stable power regulation is required. The regulator incorporates internal protection functions including over-current protection and thermal shutdown to improve operational reliability and system safety. The component is supplied in a surface-mount SOT-223 package suitable for automated PCB assembly processes. Device Type Low Dropout Linear Voltage Regulator with Enable Function Output Configuration Positive Fixed Output Nominal Output Voltage 3.3 V Maximum Output Current 1 A minimum continuous load current capability Input Voltage Range Operates from low-voltage DC input supplies up to 6 V maximum Dropout Voltage Low dropout operation suitable for battery-powered and low-headroom applications Output Accuracy High precision regulated output voltage with tight tolerance characteristics Quiescent Current Low standby current for power-efficient system operation Power Supply Rejection High ripple rejection performance for low-noise output regulation Protection Features Integrated over-current protection Thermal shutdown protection Short-circuit protection Operating Temperature Range Suitable for industrial temperature operating conditions from negative forty degrees Celsius to positive eighty-five degrees Celsius Package Information Surface-mount SOT-223 package Mounting Method Surface Mount Technology Applications LCD monitors LCD televisions Set-top boxes Portable electronics Embedded controllers Industrial electronic systems Low-noise power supply applications #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Video Decoder IC LCD TV/Monitor 80-HTQFP (12x12) #CommonPartsLibrary #IntegratedCircuit #Interface #Encoder #Decoder #Converter #TVP5147M1

LCD Driver 32-SSOP-A #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Display-Driver #BU91796

8 Position FFC, FPC Connector Contacts, Bottom 0.039" (1.00mm) Surface Mount, Right Angle The Molex Easy-On connector is a compact surface-mount FPC/FFC interconnect solution designed for reliable board-to-cable connections in space-constrained electronic systems. Featuring a bottom-contact configuration with a flip-lock actuator, it provides secure retention of flexible printed circuits while supporting repeated insertion and removal cycles. Its low-profile construction and robust locking mechanism make it suitable for consumer electronics, industrial controls, embedded systems, displays, and portable devices where dependable signal transmission and compact form factors are required. Engineering Specifications Manufacturer: Molex Series: Easy-On FD19 Part Number: 2005280080 Connector Type: FFC/FPC Connector Contact Configuration: Bottom Contact Actuator Type: Flip-Lock ZIF Mounting Style: Surface Mount Orientation: Right Angle Circuit Count: Eight Positions Pitch: One Millimeter Cable Type: Flexible Flat Cable / Flexible Printed Circuit Contact Material: Copper Alloy Contact Finish: Gold over Nickel Housing Material: High-Temperature Thermoplastic Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Halogen Free: Yes Application Areas: LCD Interfaces, Touch Panels, Embedded Electronics, Industrial Equipment, Portable Devices, Consumer Electronics #Molex #EasyOn #FD19 #FFCConnector #FPCConnector #FlipLock #BottomContact #ZIFConnector #SMTConnector #ElectronicComponents #Interconnect #PCBDesign #EmbeddedSystems #DisplayInterface #IndustrialElectronics

LCD Driver 16-PDIP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Display-Driver #CD4543

- Controller, TFT LCD Voltage Regulator IC 4 Output 24-HTSSOP #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

Kinetis KL46 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, USB FS Device/OTG, Segment LCD, TSI, MAPBGA-121 #microcontrollers #Kinetis #commonpartslibrary

Kinetis KL46 series, 48-MHz/32-bit ARM Cortex-M0+, 256 kB flash, 32 kB SRAM, USB FS Device/OTG, Segment LCD, TSI, MAPBGA-121 #microcontrollers #Kinetis #commonpartslibrary

Graphic LCD Display Module Transflective Black (White - Inverted) FSTN - Film Super-Twisted Nematic Parallel/Serial 128 x 64 #commonpartslibrary #optoelectronic #lcd #displaymodule

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, USB FS, LCD, ext. SMPS #Microcontrollers #stm32 #commonpartslibrary

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, USB FS, LCD, ext. SMPS #Microcontrollers #stm32 #commonpartslibrary

16x2 LCD Display Module WC1602A-STBLWHC06 HD44780 Compatible with backlight. Usable with Arduino, Adafruit, Raspberry PI #LCD

Kinetis KL46 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, USB FS Device/OTG, Segment LCD, TSI, LQFP-64 #microcontrollers #Kinetis #commonpartslibrary

Kinetis KL43 series, 48-MHz/32-bit ARM Cortex-M0+, 256 kB flash, 32 kB SRAM, USB FS Device (xtal-less), Segment LCD, FlexIO, MAPBGA-64 #microcontrollers #Kinetis #commonpartslibrary

Kinetis KL43 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, USB FS Device (xtal-less), Segment LCD, FlexIO, MAPBGA-64 #microcontrollers #Kinetis #commonpartslibrary

Kinetis KL43 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, USB FS Device (xtal-less), Segment LCD, FlexIO, LQFP-64 #microcontrollers #Kinetis #commonpartslibrary

Graphic LCD Display Module Transmissive Red, Green, Blue (RGB) TFT - Color Parallel, 8-Bit/16-Bit (RGB) 2.4" (60.96mm) 240 x 320 #commonpartslibrary #lcd #module

LCD Driver IC 32 SEGMENT 44-PLCC

2 SPLC780 LCD Screen ROHS #module #LCD