555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-SOIC The TLC555IDR is a low-power CMOS timer device designed as a functional replacement for the standard bipolar 555 timer while providing significantly reduced supply current and improved operating efficiency. The device supports both astable and monostable operating modes and is commonly used for timing generation, pulse shaping, oscillation, PWM generation, delay circuits, and frequency generation applications. The CMOS architecture enables low power consumption, rail-to-rail output capability, and stable timing performance over a wide operating voltage range. The device is suitable for battery-powered systems, portable electronics, industrial controls, instrumentation, consumer products, and embedded electronic designs. The TLC555IDR is supplied in a compact SOIC surface-mount package intended for automated PCB assembly and space-constrained applications. Electrical Characteristics CMOS low-power timer architecture Functional equivalent to standard 555 timer devices Wide operating supply voltage range Low quiescent supply current High input impedance Rail-to-rail output swing capability Stable threshold and trigger levels Compatible with TTL and CMOS logic levels Capable of astable and monostable operation Adjustable duty cycle and frequency operation High output drive capability for direct interfacing Low noise and improved switching performance compared to bipolar 555 timers Functional Features Precision timing generation Oscillator and clock generation Pulse-width modulation support One-shot pulse generation Delay timer implementation Missing pulse detection Frequency divider implementation Sequential timing control LED flashing and tone generation PWM motor and power control applications Package Information Surface-mount SOIC package Standard tape-and-reel packaging format Compact footprint for automated assembly RoHS compliant device construction Environmental and Operating Conditions Industrial operating temperature range ESD protection handling required Suitable for commercial and industrial embedded systems Designed for low-power electronic applications Typical Applications Timer circuits Pulse generators Oscillators PWM controllers LED flashers Alarm and tone generators Frequency generators Power management timing Embedded control systems Portable battery-powered electronics #commonpartslibrary #integratedcircuit #timer #oscillator

Hot Swap Controller 1 Channel General Purpose 23-LQFN-CLIP (6x5) The TPS16850VMAR is an automotive-grade integrated hot-swap and protection controller designed for robust power-path management in low-voltage DC systems. The device provides comprehensive protection features including overvoltage protection, undervoltage protection, reverse current blocking, inrush current control, overcurrent protection, and short-circuit protection. It is intended for applications requiring controlled power delivery and fault isolation in harsh electrical environments. The device integrates dual back-to-back MOSFET control to support bidirectional current blocking and safe power switching. Adjustable protection thresholds and timing parameters allow flexible system configuration for various power rail requirements. The TPS16850VMAR supports operation across a wide supply voltage range and is optimized for automotive and industrial systems requiring high reliability and transient immunity. The controller includes fault reporting and system status monitoring functions to support intelligent power management architectures. Soft-start capability minimizes inrush current during startup, reducing stress on connectors, power supplies, and downstream circuitry. Integrated thermal protection enhances system safety during abnormal operating conditions. The TPS16850VMAR is qualified for automotive applications and complies with AEC-Q100 requirements. The device is provided in a compact VQFN package suitable for space-constrained designs and high-density PCB layouts. Key Features Automotive-qualified hot-swap and eFuse controller Wide operating input voltage range Adjustable overvoltage and undervoltage protection Reverse current and reverse polarity protection Inrush current control with programmable soft-start Adjustable overcurrent and short-circuit protection Fault monitoring and reporting outputs Integrated thermal shutdown protection Back-to-back MOSFET control architecture Fast fault response and isolation Support for controlled power sequencing Designed for harsh automotive electrical environments AEC-Q100 qualified for automotive applications Compact VQFN surface-mount package Applications Automotive electronic control units Infotainment and telematics systems ADAS and camera modules Industrial power distribution Hot-swappable system power rails Battery-powered embedded systems Power-path management systems Protection for sensitive downstream electronics Electrical Characteristics Operates from low-voltage DC power rails Supports programmable protection thresholds Integrated current sensing and fault detection High transient immunity for automotive environments Low standby current operation Fast response to overload and fault conditions Mechanical Characteristics Surface-mount VQFN package Compact footprint for dense PCB layouts RoHS-compliant package construction Suitable for automated assembly processes Environmental and Reliability Specifications Automotive AEC-Q100 qualified Extended operating temperature range ESD protection on interface pins Designed for high-reliability applications Supports operation in electrically noisy environments #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

USB Type-C USB 2.0 Receptacle Connector – Right-angle USB Type-C receptacle designed for consumer electronics, industrial controllers, IoT devices, embedded systems, charging equipment, portable products, and USB-enabled communication interfaces. The Same Sky (formerly CUI Devices) UJ20-C-H-G-SMT-2-P16-TR features a 24-contact (16 active + 8 dummy) USB Type-C interface supporting USB 2.0 data rates up to 480 Mbps. It is rated for 48 VDC, with 5 A on VBUS power contacts, 1.25 A on VCONN contacts, and 0.25 A on signal contacts. Designed with a surface-mount, right-angle configuration plus through-hole retention tabs, it provides enhanced mechanical strength for repeated cable insertion. Features include gold-plated contacts, shielded steel shell (SUS304), UL94 V-0 housing, 10,000 mating cycles, and an operating temperature range of −25°C to +85°C, making it ideal for reliable power and data connectivity in compact embedded designs. #SameSky #UJ20CHGSMT2P16TR #USBTypeC #USB20 #USBConnector #TypeCReceptacle #BoardToCable #SurfaceMountConnector #EmbeddedSystems #IndustrialElectronics #IoT #ConsumerElectronics

ADXL345 iMEMS® Accelerometer, 3 Axis Sensor Evaluation Board The ADXL345 measures acceleration in three axes (X, Y, Z) and outputs digital data via either I²C or SPI interfaces. It is widely used in applications like tilt sensing, vibration monitoring, free-fall detection, and motion-based user interfaces. Its high resolution (up to 13-bit) allows it to detect very small changes in motion, making it suitable for both consumer electronics and industrial applications. Key Features 3-axis acceleration measurement (X, Y, Z) Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g High resolution (13-bit) with up to 4 mg/LSB sensitivity Digital output interfaces: I²C and SPI Low power consumption: ideal for battery-powered devices Built-in motion detection functions: Tap and double-tap detection Free-fall detection Activity and inactivity monitoring Wide bandwidth range: supports various data rates for different applications Operating voltage: typically 2.0V to 3.6V Compact package: small LGA form factor suitable for space-constrained designs Common Applications Smartphones and tablets (screen rotation, motion sensing) Wearable devices and fitness trackers Gaming controllers Robotics and drones Vibration and shock monitoring systems #commonpartslibrary #developmentboard #evaluationboard #sensor

2-Position Horizontal Through-Hole Terminal Block – Single-level wire-to-board terminal block designed for industrial automation, power supplies, control systems, instrumentation, HVAC equipment, embedded electronics, and general-purpose PCB power connections. The Würth Elektronik 691137710002 is part of the WR-TBL Series 1377, featuring 2 positions on a 5.00 mm pitch with a horizontal (side-entry) wire orientation and through-hole PCB mounting. It utilizes a screw clamp with leaf spring and wire guard for secure wire retention, supporting 12–30 AWG conductors. Rated for 16 A and 300 V, it is constructed with nickel-plated copper alloy contacts, a zinc-plated M2.5 screw, and a polycarbonate (PC) housing. The terminal block has a recommended tightening torque of 0.4 Nm (3.5 lb-in) and operates over a −30°C to +120°C temperature range, making it suitable for reliable industrial and embedded power interconnections. #WurthElektronik #691137710002 #WRTBL1377 #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHoleConnector #IndustrialAutomation #PowerSupply #EmbeddedSystems #PCBConnector #ControlSystems

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Green LED Indication - Discrete 2.2V 0603 (1608 Metric) The SML-LX0603GW-TR is a surface-mount white LED in a compact 0603 (1608 metric) package, designed for indicator and backlighting applications. It offers high brightness with low power consumption and wide viewing angle, making it suitable for portable and space-constrained electronic devices. The device is optimized for automated assembly and is supplied in tape-and-reel packaging. Key Features White LED (cool white emission) Compact 0603 (1.6 mm × 0.8 mm) SMD package High luminous intensity with low forward current Wide viewing angle (~120° typical) Low power consumption Compatible with reflow soldering Tape & reel packaging for automated assembly Optical Characteristics (Typical values) Emission Color: White Luminous Intensity: ~100 to 300 mcd @ 20 mA Color Temperature: ~6000K to 8000K Viewing Angle: 120° Electrical Characteristics (Typical values unless otherwise specified) Forward Voltage (VF): Typ: 3.0 V Max: 3.4 V @ 20 mA Forward Current (IF): 20 mA (continuous) Reverse Voltage (VR): 5 V Power Dissipation: ~75 mW Absolute Maximum Ratings Forward Current: 25 mA (continuous) Peak Forward Current: 100 mA (pulse, short duration) Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +100°C Mechanical Characteristics Package Type: 0603 (1608 metric) Dimensions: ~1.6 mm × 0.8 mm × 0.8 mm Mounting Type: Surface mount (SMT) Polarity: Cathode marking on package Material Specifications Lens: Epoxy resin (diffused) LED Chip: InGaN (Indium Gallium Nitride) Lead Frame: Copper alloy with silver plating Packaging Information Packaging Type: Tape & Reel (TR) Reel Quantity: Typically 3,000–5,000 pcs per reel RoHS Compliant: Yes Lead-Free: Yes Typical Applications Status indicators Backlighting (LCD, keypad, buttons) Consumer electronics Portable devices Automotive interior lighting (low-power) #commonpartslibrary #optoelectronic #led #SML-LX0603

3-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for consumer electronics, industrial controls, embedded systems, home appliances, IoT devices, instrumentation, and general-purpose wire-to-board interconnect applications. The JST B3B-PH-K-S is part of the PH Series, featuring 3 positions on a 2.00 mm (0.079") pitch with a through-hole vertical PCB mount. It utilizes brass square pins with tin plating, a 4-wall polarized shroud, and a detent locking mechanism for secure mating with compatible PH series crimp housings. Rated for 2 A and 100 V, it is constructed with a UL94 V-0 rated PA66 (Nylon 6/6) housing, providing reliable electrical and mechanical performance. The connector supports press-fit and solder termination, operates over a −25°C to +85°C temperature range, and is ideal for compact embedded and industrial board-to-wire applications. #JST #B3BPHKS #PHSeries #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #2mmPitch #BoardToCable #IndustrialElectronics #EmbeddedSystems #Connector

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A SOT-23-6 Thin, TSOT-23-6 The AP63200/AP63201/AP63203/AP63205 is a 2A, synchronous buck converter with a wide input voltage range of 3.8V to 32V and fully integrates a 125mΩ high-side power MOSFET and a 68mΩ low-side power MOSFET to provide high-efficiency step-down DC/DC conversion. The AP63200/AP63201/AP63203/AP63205 device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated compensation network. The AP63200/AP63201/AP63203/AP63205 has optimized designs for Electromagnetic Interference (EMI) reduction. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. It also has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which further erases highfrequency radiated EMI noise caused by MOSFET switching. The device is available in a low-profile, TSOT26 package. • VIN 3.8V to 32V • 2A Continuous Output Current • 0.8V ±1% Reference Voltage • 22µA Ultralow Quiescent Current • Switching Frequency o 500kHz: AP63200 and AP63201 o 1.1MHz: AP63203 and AP63205 • Pulse Width Modulation (PWM) Regardless of Output Load o AP63201 • Supports Pulse Frequency Modulation (PFM) o AP63200, AP63203, and AP63205 o Up to 80% Efficiency at 1mA Light Load o Up to 88% Efficiency at 5mA Light Load • Fixed Output Voltage o 3.3V: AP63203 o 5.0V: AP63205 • Proprietary Gate Driver Design for Best EMI Reduction • Frequency Spread Spectrum (FSS) to Reduce EMI • Precision Enable Threshold to Adjust UVLO • Protection Circuitry o Overvoltage Protection o Cycle-by-Cycle Peak Current Limit o Thermal Shutdown • 12V and 24V distributed power bus supplies • Flat screen TV sets and monitors • Power tools and laser printers • White goods and small home appliances • FPGA, DSP, and ASIC supplies • Home audios • Network systems • Set top boxes • Gaming consoles • Consumer electronics #commonpartslibrary #integratedcircuit #AP63203WU7 #BuckConverter #DCDCConverter #PowerManagement #VoltageRegulator #SynchronousBuck #EmbeddedSystems #IndustrialElectronics #PowerSupply #DiodesInc #3V3Power #ElectronicsDesign

Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular

1.5µH Shielded Molded Inductor 9.1A 15.8mOhm Max 1616 (4040 Metric) The XFL4020-152MEC is a metal-composite core, shielded surface-mount power inductor with an inductance value of 1.5 µH and a current rating of 9.1 A. Its low DCR of 15.8 mΩ maximum helps reduce conduction losses, making it suitable for efficient power conversion designs. The component is rated for automotive-grade reliability (AEC-Q200) and operates over a wide temperature range of -40°C to +125°C. Key Features Inductance: 1.5 µH Tolerance: ±20% Maximum Current Rating: 9.1 A Saturation Current (Isat): Approximately 4.6 A Low DC Resistance (DCR): 15.8 mΩ max Shielded molded construction for reduced EMI radiation Metal composite core for high efficiency and compact size Surface-mount package: 1616 / 4040 metric Dimensions: approximately 4.0 mm × 4.0 mm × 2.1 mm Self-resonant frequency: 59 MHz AEC-Q200 qualified for automotive applications Operating temperature: -40°C to +125°C Typical Applications DC/DC switching converters Power supply filtering Voltage regulator modules (VRM) Battery-powered devices Automotive power electronics Embedded power management systems Hashtags #Coilcraft #XFL4020 #PowerInductor #ShieldedInductor #SMTInductor #DC_DCConverter #PowerElectronics #AutomotiveElectronics #AECQ200 #PCBDesign #ElectronicComponents #commonpartslibrary #inductor

Board Mount Humidity Sensors Intermediate Humidity and Temperature Sensor Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R2 is a fully calibrated, low-power environmental sensor that measures relative humidity (RH) and temperature. It integrates sensing elements, signal processing, and a digital interface into a small surface-mount package, making it ideal for space-constrained designs. Key Features Sensor Type: Digital humidity and temperature sensor Interface: I²C (easy MCU integration) Supply Voltage: ~1.08 V to 3.6 V Humidity Accuracy: up to ±1.8% RH (typical) Temperature Accuracy: up to ±0.2 °C (typical) Response Time: Fast measurement and low latency Power Consumption: Ultra-low, suitable for battery devices Package: DFN (compact, ~1.5 × 1.5 mm) Factory Calibration: No external calibration required Functional Overview The sensor uses capacitive humidity sensing combined with a bandgap temperature sensor. Internal electronics convert these measurements into digital data via I²C, eliminating the need for external ADCs or complex signal conditioning. Design Advantages Small footprint for compact PCBs Low power consumption for IoT and portable devices High reliability with long-term stability Fast response time for real-time monitoring Simple integration with microcontrollers Typical Applications IoT and smart home devices HVAC and climate control systems Wearables and portable electronics Industrial monitoring systems Environmental data logging #CommonPartsLibrary #Sensors,-Transducer #Humidity #Moisture-Sensor #SHT4x

Fuse Holder 32V 1 Circuit Blade Through Hole The 178.6764.0001 is an automotive blade fuse holder from Littelfuse, part of the MINI® FL1 series, designed for direct PCB mounting (through-hole). It allows easy integration of a single MINI blade fuse into a printed circuit board for overcurrent protection. This component is commonly used in automotive electronics, industrial control systems, and embedded power circuits, where compact and reliable fuse protection is required. Key Features Fuse Type Compatibility Supports MINI® automotive blade fuses (ATM/APM type) PCB Mount (Through-Hole) Designed for direct soldering to PCB for strong mechanical support Current Capability Up to 30 A maximum ~22 A continuous rating Voltage Rating Up to 58 VDC (automotive systems) Single Fuse Position Holds 1 fuse per holder Thermoplastic Housing Heat-resistant black body UL94 V-0 flammability rating for safety Contact Material Tin-plated copper alloy terminals for reliable conductivity Standard PCB Pitch Approx. 7.62 mm pin spacing Modular Design Multiple holders can be mounted side-by-side for multi-channel protection blade fuse holder automotive PCB #Circuit-Protection #Fuseholders #FL1

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C3-WROOM-02-N4 is a compact, general-purpose Wi-Fi and Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-C3 SoC and integrates RF components, crystal oscillator, flash memory, and PCB antenna in a single module. It is designed for a wide range of applications such as IoT devices, smart home systems, industrial automation, and consumer electronics, offering a balance of performance, low power consumption, and cost efficiency. Key Features MCU & Memory 32-bit RISC-V single-core processor up to 160 MHz 384 KB ROM 400 KB SRAM + 8 KB RTC SRAM Integrated 4 MB SPI flash (N4 variant) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Supports Station, SoftAP, and Station + SoftAP modes Bluetooth 5 (BLE) with mesh support Data rates up to 150 Mbps (Wi-Fi) Peripherals & Interfaces Up to 15 GPIOs Interfaces: SPI, UART, I2C, I2S LED PWM ADC (SAR) Timers & watchdog USB Serial/JTAG support TWAI® (CAN 2.0 compatible) #commonpartslibrary #transceiver #module #wireless #rf