1/1 Transceiver Half RS422, RS485 8-SOIC RS-485 Transceiver – Low-power differential transceiver designed for RS-485 and RS-422 communication applications. Operates from a 3.3V supply, supports data rates up to 10 Mbps, and provides ±15kV ESD protection. Features one driver and one receiver with half-duplex operation in a 3.3V SOIC-8 package. #RS485Transceiver #DifferentialTransceiver #CommunicationIC #MaxLinear #SP3485EN-LTR

60V, 6A Power Limiting, Surge Protection Industrial eFuse, Adjustable Overvoltage cut-off, Active Current Limiting, VQFN-24 efuse protection switch Texas*RGE0024H*

Ultra-Low Capacitance Quad-Channel ESD Protection Array – Four-channel rail-to-rail transient voltage suppressor (TVS) / ESD protection array designed to protect high-speed data and communication interfaces including USB 2.0, HDMI, DVI, Ethernet, mobile devices, and embedded systems from electrostatic discharge (ESD) and transient overvoltage events. Features ultra-low 1 pF input/output capacitance to preserve signal integrity on high-speed lines, 6 V minimum breakdown voltage, and IEC 61000-4-2 Level 4 ESD protection (±8 kV contact discharge) with very low clamping voltage through an integrated rail-to-rail steering diode architecture. Includes four unidirectional protection channels, low reverse leakage current, and AEC-Q101 qualification for automotive applications. Specified for operation over a −55°C to +150°C ambient temperature range and housed in a compact 6-pin TSOP (SOT-457 / SC-74) surface-mount package. #Nexperia #PRTR5V0U4D125 #PRTR5V0U4D #TVSDiode #ESDProtection #TransientProtection #USBProtection #HDMIProtection #DVISProtection #HighSpeedInterface #AutomotiveElectronics #EmbeddedSystems

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

Fuse Holder 6.3 A 250V 1 Circuit Cartridge Through Hole PCB-Mount Fuse Holder designed to secure 5 mm x 20 mm cartridge fuses for overcurrent protection applications. The PTF series fuse holder supports a rated voltage of 250 V and current rating of 6.3 A, with a single circuit, through-hole PCB mounting configuration, and PC pin termination. #FuseHolder #CircuitProtection #PCBMount #Littelfuse #PTFSeries

OR Controller N+1 ORing Controller N-Channel 1:1 24-VQFN (4x4) The LM74930-Q1 ideal diode controller drives and controls external back to back N-Channel MOSFETs to emulate an ideal diode rectifier and power path ON and OFF control with over current and overvoltage protection. The wide input supply of 4 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs. The device can withstand and protect the loads from negative supply voltages down to –65 V. An integrated high side gate control (HGATE) drives the first MOSFET in the power path. The device allows load disconnect (ON and OFF control) in case of overcurrent, overvoltage and undervoltage event using HGATE control while ideal diode controller (DGATE) drives a second MOSFET to replace a Schottky diode for input reverse polarity protection and output voltage holdup by blocking the reverse current from output to input. The device has integrated current sense amplifier which provides with an adjustable overcurrent and short circuit protection with circuit breaker functionality. The device features an adjustable overvoltage and undervoltage protection feature to protect against supply transients. LM74930-Q1 features MODE pin which can be used to selectively enable or disable reverse current blocking functionality. Features • AEC-Q100 qualified for automotive applications – Device temperature grade 1: –40°C to +125°C ambient operating temperature range • 4-V to 65-V input range • Reverse input protection down to –65 V • Drives external back-to-back N-Channel MOSFETs in common source configuration • Ideal diode operation with 10.5-mV A to C forward voltage drop regulation • Low reverse detection threshold (–10.5 mV) with fast DGATE turn-off response (0.5 µs) • 18-mA peak gate (DGATE) turn on current • 2.6-A peak DGATE turn-off current • Adjustable overcurrent and short circuit protection • Analog current monitor output with 10% accuracy (IMON) • Adjustable overvoltage and undervoltage protection • Low 2.5-μA shutdown current (EN=Low) • MODE pin to allow bi-directional current flow (MODE=Low) • Meets automotive ISO7637 transient requirements with a suitable TVS diode • Available in space saving 24-pin VQFN package 2 Applications • 12-V / 24-V automotive reverse battery protection • Industrial transport • Redundant power supply ORing #IdealDiodeController #SurgeStopper #CircuitBreaker #PowerPathProtection #AutomotiveElectronics #AECQ100 #ReversePolarityProtection #OvercurrentProtection #TexasInstruments #PMIC

Ultra-Low Quiescent Current LDO Voltage Regulator – Fixed 3.3 V low-dropout (LDO) linear voltage regulator delivering up to 150 mA output current for battery-powered devices, portable electronics, sensors, wireless modules, and embedded systems. Operates from a 2.3 V to 5.5 V input voltage and features an ultra-low 21 µA typical quiescent current, 135 mV maximum dropout voltage at 150 mA, and 60 dB PSRR at 10 kHz for efficient, low-noise power regulation. Includes an enable (EN) input, low shutdown current (<1 µA typical), overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Optimized for use with 1 µF ceramic capacitors, operates over a −40°C to +125°C temperature range, and is housed in a 5-pin TSOT-23 package. #AnalogDevices #ADP121AUJZ33R7 #ADP121 #LDO #LinearRegulator #VoltageRegulator #LowDropout #PowerManagement #150mA #LowPower #TSOT23 #EmbeddedSystems

Automotive 80 V, 2 A Synchronous Buck Converter IC – Automotive-grade synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, battery-powered systems, distributed power, and embedded applications. Operates from a 4.2 V to 80 V input voltage and provides an adjustable output voltage from 1 V to 75 V with up to 2 A continuous output current. Features an integrated high-side and low-side MOSFET, 200 kHz to 2.2 MHz programmable switching frequency, 40 µA typical quiescent current, 98% maximum duty cycle, forced PWM/light-load efficiency modes, spread-spectrum EMI reduction, frequency synchronization, power-good output, fixed soft-start, and pre-biased startup. Includes comprehensive protection with cycle-by-cycle current limiting, hiccup-mode short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient (−40°C to +150°C junction) temperature range and is housed in an 8-pin SO PowerPAD (HSOIC) package. #TexasInstruments #LMR38020FSQDDARQ1 #LMR38020Q1 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SIMPLESWITCHER #HSOIC8 #EmbeddedSystems

Automotive Smart High-Side Power Switch – Single-channel 100 V smart high-side N-channel power switch for automotive power distribution, electronic fuse (eFuse), load protection, and battery-connected applications. Operates from a 3.5 V to 80 V supply, drives up to 4 A continuous output current, and features an ultra-low 10 mΩ typical RDS(on) for high-efficiency load switching. Includes adjustable current limiting, reverse current blocking, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), short-circuit protection, thermal shutdown, slew-rate control, open-load diagnostics, status flag output, and differential input control. Qualified to AEC-Q100 Grade 1, specified for operation over a −40°C to +125°C ambient temperature range, and housed in a 19-pin VSSOP (DGX) package. #TexasInstruments #TPS48110AQDGXRQ1 #TPS48110Q1 #SmartHighSideSwitch #HighSidePowerSwitch #EFuse #LoadSwitch #PowerDistribution #Automotive #CurrentLimiting #ReverseBatteryProtection #AECQ100 #EmbeddedSystems

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-223-5 Linear Voltage Regulator (LDO) providing a fixed 3.3 V output with up to 500 mA output current from an input voltage range of 2.3 V to 6.0 V. It features low dropout voltage, stable operation with ceramic output capacitors, current limiting, short-circuit protection, and overtemperature protection, making it suitable for low-voltage power regulation applications. #LDO #LinearVoltageRegulator #FixedOutput #3V3 #500mA #LowDropout #PowerManagement #Microchip

Electronic Fuse Regulator 4A 8-WSON (2x2) eFuse providing input power-path protection with adjustable current limiting and fast overvoltage protection for 3 V to 18 V input supplies, supporting 0.5 A to 4 A load current. The TPS259535DSGR features 34 mΩ typical on-resistance, a 5.7 V typical output overvoltage clamp, auto-retry after thermal shutdown, active-high enable with adjustable UVLO, and quick output discharge, all in an 8-pin WSON package. #TexasInstruments #TPS259535DSGR #eFuse #PowerManagement #HotSwap #OvervoltageProtection #CurrentLimiting #UVLO #QuickOutputDischarge #WSON8