2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

24 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 32-TQFP (5x5) The ADS131M08IPBSR is a high-precision, simultaneous-sampling analog-to-digital converter designed for multi-channel data acquisition systems requiring accurate and synchronized measurements. Manufactured by Texas Instruments, this device integrates eight differential input channels with low-noise performance, programmable gain amplification, and precision voltage reference support. The converter architecture is optimized for industrial automation, energy monitoring, medical instrumentation, and precision sensing applications where phase alignment and signal fidelity are critical. The device incorporates delta-sigma conversion technology with integrated digital filtering to provide high dynamic range and excellent noise performance across a wide operating bandwidth. It supports flexible data interface configurations through a high-speed SPI-compatible serial interface, enabling efficient communication with microcontrollers, DSPs, and FPGA-based systems. The integrated diagnostic and monitoring features improve system reliability and simplify fault detection in safety-critical applications. The ADS131M08IPBSR operates from low-voltage analog and digital supplies while maintaining low power consumption suitable for embedded and portable systems. The compact thermally enhanced package supports dense PCB layouts and reliable operation across industrial temperature environments. Engineering Specification Device Type: Simultaneous-Sampling Delta-Sigma Analog-to-Digital Converter Manufacturer: Texas Instruments Channel Configuration: Eight Differential Input Channels Resolution: Twenty-Four Bit ADC Architecture: Delta-Sigma Sampling Type: Simultaneous Sampling Input Type: Differential Analog Inputs Programmable Gain Amplifier: Integrated Data Output Interface: SPI-Compatible Serial Interface Reference Support: External Precision Voltage Reference Digital Filtering: Integrated Sinc Filter Architecture Operating Supply Voltage: Low-Voltage Analog and Digital Supplies Noise Performance: Low Noise Precision Measurement Capability Power Consumption: Optimized for Low Power Operation Diagnostics Features: Integrated Self-Monitoring and Fault Detection Temperature Range: Industrial Operating Temperature Range Package Type: TQFP Surface-Mount Package Mounting Type: Surface Mount Technology Application Areas: Energy Metering, Industrial Automation, Medical Instrumentation, Data Acquisition Systems, Multi-Channel Sensor Interfaces #commonpartslibrary #integratedcircuit #analog #digital #converter

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

WiFi Modules (802.11) (Engineering Samples) SMD module, ESP32-C3, 4MB SPI flash, PCB antenna, -40 C +85 C

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3.5A SOT-23-6 Thin, TSOT-23-6 The LMR51635YFDDCR specification defines the engineering requirements for a synchronous step-down DC-DC converter integrated circuit designed for high-efficiency power regulation in embedded and industrial electronic systems. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable voltage conversion, efficient power management, and long-term operational reliability. The device is intended for use in industrial automation, telecommunications equipment, consumer electronics, test and measurement instruments, distributed power systems, and embedded applications requiring regulated low-voltage power rails from higher-voltage DC sources. It integrates high-performance switching circuitry to provide efficient voltage conversion while minimizing external component count and overall system power loss. Engineering Requirements The DC-DC converter shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, low power consumption, and reliable long-term operation. The device shall maintain stable functionality under specified input voltage, output load, temperature, and environmental operating conditions. Electrical characteristics shall provide accurate output voltage regulation, high conversion efficiency, low output ripple, and fast transient response during load and input voltage variations. The converter shall maintain stable switching operation while supporting continuous and dynamic power delivery with minimal performance degradation. The integrated control architecture shall ensure reliable startup, controlled shutdown, and stable operation under varying load conditions. Built-in protection mechanisms shall support safe operation during abnormal conditions, including overload, overcurrent, thermal stress, and short-circuit events, thereby enhancing overall system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and long-term reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of electrical or mechanical performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect device functionality or reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, thermal characterization reports, qualification records, inspection reports, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #DCDCConverter #BuckConverter #PowerManagement #PowerElectronics #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #QualityAssurance #EngineeringDocumentation

470 nH Shielded Molded Inductor 9.1 A 8.36mOhm Max 1616 (4040 Metric) The XFL4015-471MEC specification establishes the engineering requirements for the designated electronic component, defining its intended functionality, mechanical characteristics, electrical performance, material requirements, manufacturing quality, and inspection criteria. This specification serves as the primary technical reference to ensure the component consistently meets design expectations, operational reliability, and applicable industry standards throughout production and field use. Engineering Requirements The component shall be manufactured using approved materials and controlled production processes to ensure consistent electrical and mechanical performance. All dimensions, tolerances, and physical characteristics shall conform to the latest approved engineering documentation. The component shall be suitable for its intended operating environment and shall maintain performance within the specified electrical and environmental conditions. Workmanship shall be free from defects including cracks, contamination, corrosion, deformation, or any condition that could adversely affect reliability or functionality. All manufacturing and inspection processes shall be performed using calibrated equipment and verified in accordance with established quality management procedures. Testing and validation shall confirm compliance with electrical, mechanical, and environmental performance requirements prior to product acceptance. Any deviation from this specification shall require formal engineering review, documented approval, and appropriate revision control before implementation. Documentation Supporting documentation shall include engineering drawings, material certifications, inspection reports, test records, process documentation, and revision-controlled manufacturing specifications. All documentation shall be maintained in accordance with the organization's quality management and document control requirements. Revision Control Changes to this specification shall be managed through the approved engineering change process to ensure traceability, technical accuracy, and continued compliance with applicable design and quality requirements. #EngineeringSpecification #TechnicalSpecification #ElectronicComponents #ElectricalEngineering #QualityControl #Manufacturing #EngineeringDocumentation #Compliance

10 µH Shielded Drum Core, Wirewound Inductor 7.5 A 30mOhm Max Nonstandard # Engineering Specification ## Product Name SRP1038A-100M ## General Description SRP1038A-100M is a shielded surface mount power inductor designed for use in high-efficiency DC-DC conversion and power management applications. The device is intended to support energy storage and current smoothing functions in switching regulator circuits, where stable inductance performance and low power loss are critical. The inductor utilizes a ferrite core construction with a shielded magnetic structure to minimize electromagnetic interference and reduce magnetic flux leakage. This enables improved circuit density and reduced noise coupling in compact electronic assemblies. The design is optimized for use in high current power conversion systems, including buck converters, point-of-load regulators, and distributed power architectures. The component is widely used in industrial, automotive, telecommunications, and embedded systems where reliable energy transfer, thermal stability, and efficient power delivery are required. Its surface mount form factor supports automated PCB assembly and compact system integration while maintaining mechanical robustness under thermal and electrical stress. The design emphasizes low direct current resistance, high current handling capability, and stable inductance behavior under load conditions. It is suitable for applications requiring efficient power conversion with minimal energy loss and stable electromagnetic performance. ## Functional Requirements ### Energy Storage The device shall store energy in a magnetic field during switching operation in power conversion circuits. ### Current Filtering The device shall smooth current ripple in switching regulator applications to maintain stable output conditions. ### Electromagnetic Shielding The device shall reduce electromagnetic interference through a shielded magnetic structure. ### Power Conversion Support The component shall support efficient operation in DC-DC conversion systems. ## Electrical Requirements ### Inductive Performance The device shall provide stable inductance characteristics suitable for power conversion and filtering applications. ### Low Loss Operation The inductor shall minimize resistive and core losses to improve overall system efficiency. ### High Current Capability The device shall support operation under elevated current conditions typical of switching power supplies. ### Thermal Stability The inductor shall maintain performance consistency under thermal loading and temperature variation. ## Mechanical Requirements ### Surface Mount Package The device shall be supplied in a surface mount configuration suitable for automated PCB assembly processes. ### Structural Integrity The component shall withstand mechanical stress during assembly, operation, and thermal cycling. ### PCB Integration The design shall support compact layout integration in multilayer printed circuit board systems. ## Environmental Requirements ### Operating Conditions The device shall operate reliably under conditions typical of industrial and embedded electronic systems. ### Thermal Performance The component shall maintain stable operation under continuous power cycling and heat generation. ### Storage and Handling The device shall retain structural and electrical integrity during storage, transportation, and handling. ## Quality Requirements ### Reliability The inductor shall provide consistent long-term performance under continuous electrical and thermal stress. ### Verification Electrical and thermal characteristics shall be validated through appropriate qualification and testing procedures. ### Compliance The product shall conform to applicable standards for magnetic components used in power electronics applications. ## Documentation Requirements Technical documentation shall include application guidance, layout recommendations for switching power designs, thermal considerations, electrical characteristics, and integration practices for DC-DC converter systems. ## Classification Tags #SRP1038A100M #PowerInductor #ShieldedInductor #SMDInductor #MagneticComponent #EnergyStorageInductor #DCDCConverter #BuckConverter #PowerElectronics #SMPSDesign #ElectromagneticCompatibility #EMIShielding #PCBDesign #ElectricalEngineering #EmbeddedPower #IndustrialElectronics #AutomotiveElectronics #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #PowerManagement #CircuitDesign #HighCurrentInductor

USB-C (USB TYPE-C) Receptacle Connector 24 Position Panel Mount, Through Hole, Right Angle The MUSBRM1C1M0 is a ruggedized USB Type-C receptacle connector designed for high-reliability data and power connectivity in industrial, embedded, transportation, and harsh-environment applications. The connector features a reversible USB Type-C interface that supports modern high-speed communication protocols while providing robust mechanical durability and secure board-level attachment. Its reinforced construction helps withstand vibration, shock, and repeated mating cycles, making it suitable for demanding applications where reliability and long service life are critical. The device is commonly used in industrial controllers, communication equipment, medical devices, consumer electronics, and next-generation embedded systems requiring compact and versatile connectivity. Engineering Specifications Manufacturer: Amphenol Communications Solutions Part Number: MUSBRM1C1M0 Connector Type: USB Type-C Receptacle Interface Standard: Universal Serial Bus Type-C Connector Gender: Receptacle Mounting Style: Surface Mount Orientation: Right Angle Contact Configuration: USB Type-C Multi-Function Interface Data Support: High-Speed Data Transmission Power Delivery Support: Compatible with USB Power Delivery Architectures Shielding: Integrated EMI Shielding Contact Material: Copper Alloy Contact Finish: Gold-Plated Contact Interface Housing Material: High-Strength Metal Shield Construction Durability: High Mating Cycle Life Environmental Performance: Designed for Industrial Applications Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Embedded Systems, Industrial Automation, Consumer Electronics, Communication Equipment, Medical Devices, IoT Products, Portable Electronics, Data Acquisition Systems Key Features Reversible USB Type-C connection interface Ruggedized mechanical construction High-speed data communication capability Secure PCB mounting design Enhanced resistance to vibration and mechanical stress Integrated shielding for improved electromagnetic compatibility Compact footprint for space-constrained designs Supports modern USB power and data architectures Long operational lifespan with high insertion cycle durability Suitable for industrial and commercial electronic systems #MUSBRM1C1M0 #Amphenol #USBTypeC #USBConnector #TypeCReceptacle #HighSpeedConnectivity #PowerDelivery #IndustrialElectronics #EmbeddedSystems #CommunicationEquipment #IoTDevices #ConsumerElectronics #PCBDesign #ElectronicComponents #SurfaceMount #DataTransmission #USBPD #IndustrialAutomation #MedicalElectronics #ConnectorTechnology

Audio D/A Converter ICs 2VRMS DirectPath Aud io Stereo DAC 20-TSSOP The PCM5102AQPWRQ1 specification defines the engineering requirements for an automotive-grade digital-to-analog audio converter integrated circuit intended for high-performance digital audio applications. The specification establishes the functional, electrical, mechanical, thermal, and quality requirements necessary to ensure reliable conversion of digital audio signals into high-fidelity analog outputs. It serves as the governing technical reference for component selection, system integration, manufacturing, verification, and quality assurance throughout the product lifecycle. The device is designed to provide high-resolution audio performance with low distortion, low noise, and stable operation under automotive environmental conditions. It is suitable for use in infotainment systems, digital audio processing equipment, communication systems, and other embedded electronic applications requiring reliable digital-to-analog signal conversion. Engineering Requirements The component shall be manufactured using qualified semiconductor fabrication processes and approved materials to ensure consistent electrical performance, mechanical integrity, and long-term reliability. The device shall comply with applicable automotive qualification requirements and maintain stable operation within its specified voltage, temperature, and environmental operating ranges. Electrical performance shall meet the specified requirements for signal integrity, dynamic range, total harmonic distortion, noise performance, and output accuracy. The package shall be compatible with standard surface-mount assembly processes and shall withstand soldering and handling conditions without degradation. Workmanship shall be free from physical defects, contamination, package damage, or manufacturing irregularities that could affect functionality or reliability. Inspection, testing, and validation shall be performed using calibrated equipment and controlled procedures to verify compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approved change authorization prior to implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, qualification reports, material declarations, inspection records, manufacturing documentation, and revision-controlled technical files. All documentation shall be maintained in accordance with established engineering configuration management and quality control procedures. Revision Control Changes to this specification shall be managed through the formal engineering change control process. All revisions shall undergo technical review, validation, and approval to ensure continued compliance with design intent, automotive quality standards, and applicable regulatory requirements. #EngineeringSpecification #AutomotiveElectronics #DigitalToAnalogConverter #AudioEngineering #EmbeddedSystems #QualityAssurance #Semiconductor #EngineeringDocumentation #Compliance #CommonPartsLibrary #IntegratedCircuit #Data-Acquisition #ADCs #DACs #PCM5102