Creating Upper Torso Schematic
Thought for 5 mins 45 sec
Here are the components to add for the demo channel control circuit:
- ALQ305 – 5 V coil PCB-mount relay, 10 A SPST for switching the 24 V rail
- ACS71240LLCBTR-030B3 – Allegro ACS712 30 A bidirectional Hall-effect current sensor (SOIC-8)
- RMCF0603FT330R – 330 Ω ±1% 0.1 W resistor for the LED indicator
- D1 – LED THT power-on indicator
- 1210L075/24PR – 24 V 750 mA PTC resettable fuse (1210 SMD)
You can apply these additions to add the relay, current sensor, LED indicator (with resistor), and fuse for a single demo channel.
please connect the components
Thought for 1 min 59 sec
Here's the net-to-pin mapping for the first set of connections:
Table
| Net | Connections |
|---|---|
| 24v | F15:P1 |
| DEMO_PRE_SENSE | F15:P2, U1:IP2 |
| K1_COM_NET (new) | U1:IP1, K1:COM |
Please click Apply Changes to add these connections.
