Temperature and Humidity Sensor Design

flux

Work done:
  • All major ICs (U1–U6), display module (U4), connectors (J1–J4), protection diodes (D1, D2), passives (C1–C8, R1–R3, L1) have been added and wired according to the plan.
  • Power-path (charger U2, load switch U6, regulator U3) and protection (reverse polarity, OVP/UVLO via D1/D2, MCP100 reset monitor U5, ESD TVS) are implemented.
  • Backlight control (net BACKLIGHT_EN) and reset/programming (J3) and user I/O header (J4 pins 1–6) are connected.
  • Footprints verified and board extents measured; PCB outline resized to minX=–43 mm, maxX=+43 mm, minY=–25 mm, maxY=+25 mm (with 10 mm margin) and paused for review.
  • MPNs assigned to generic capacitors, resistors, and inductor; parts availability confirmed.
Success criteria review: ✅ Schematic includes MCU, SPI TFT with capacitive touch, USB-C with ESD/TVS, Li-ion interface with charger and power-path management, 3.3 V regulator with decoupling, backlight control, reset header, and user I/O. ✅ Protection features (reverse polarity, OVP, UVLO, OCP, ESD) are implemented. ℹ️ Layout constraints (component placement, trace length) have been measured but detailed guard-routing is pending in layout. ℹ️ ERC/DRC has not yet been run; wiring and footprints checked. ✅ BOM availability confirmed and generic parts assigned MPNs.
Recommended next step: Await your feedback or approval on the PCB outline sizing and mounting scheme before proceeding with mounting-hole placement, component placement, and detailed routing.

Flux stopped

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Voluntary Lavender T-800

    Voluntary Lavender T-800 thumbnail
    Low-Power MCU-Based SPI TFT Display Board with Advanced Power Management and Protection

    Properties

    User review requested for board size and mounting approach.

    Display

    -43

    mm

    Battery

    Consumer Electronics

    25

    mm

    USB

    flowchart TB MCU[MCU] TFT[SPI TFT + Capacitive Touch] USBC[USB-C UFP] BATT[Li-ion Battery Connector] CHG[Charger IC with Power-Path Management] REG[3.3 V Regulator] BL[Backlight Control] RST[Reset/Programming Header] IO[User I/O] USBC --> CHG BATT --> CHG CHG --> REG REG --> MCU REG --> TFT REG --> BL MCU --> TFT MCU --> IO MCU --> RST

    Touchscreen

    3.3

    V

    USB

    43

    mm

    Await user feedback or approval on PCB outline sizing and mounting scheme before proceeding with placement and mounting hole definition.

    -25

    mm

    Pricing & Availability

    Distributor

    Qty 1

    Arrow

    $4.83–$6.72

    Digi-Key

    $5.73–$10.61

    LCSC

    $18.36–$18.51

    Mouser

    $9.14–$9.46

    TME

    $3.63

    Verical

    $5.98–$19.73

    Controls