TMAG5231 Datasheet Audit
Worked for 1 min 47 sec
Scope status
- Datasheet URL: completed with platform normalization. The official TI URL was written:
https://www.ti.com/lit/ds/symlink/tmag5231.pdf - Flux subsequently ingested the PDF and stores the effective property as:
https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/3408ca2a184c374efc0e0f78891d04fb55e6d5ea39663a2fc5d6c0ccc9a6e01a.pdf - Verification: live
selfdatasheet queries now succeed and identify TMAG5231 Rev D, SLYS042D. - No intentional metadata or geometry edits were made beyond setting the Datasheet URL. The URL conversion is automatic platform behavior.
Source asset:
SOT95P237X112-3N.kicad_modTable
| Pad | Terminal | Position (mm) | Copper size |
|---|---|---|---|
| 1 | VCC | −1.055, −0.950 | 1.24 × 0.59 mm |
| 2 | OUT | −1.055, +0.950 | 1.24 × 0.59 mm |
| 3 | GND | +1.055, 0.000 | 1.24 × 0.59 mm |
- SMD rounded rectangles, corner ratio
0.125 - Two-pin-side center separation: 1.90 mm, with centers at ±0.95 mm
- Opposing-side center span: 2.11 mm
- Full copper extent across package: 3.35 mm
- Solder mask: +0.102 mm expansion
- Paste: present on all pads; no explicit expansion, therefore nominally 1:1
- Copper/mask/paste layers:
F.Cu,F.Mask,F.Paste
Fab
- Body outline: 1.30 × 2.92 mm, from X ±0.65 and Y ±1.46
- Stroke: 0.127 mm
- Pin-1 fab marker: center
(−2.325, −0.975), radius0.10 mm, stroke0.20 mm - Fab geometry is present in the source asset but its Flux “Fab Shapes” display node is currently inactive.
Courtyard
- Bounds: X ±1.925, Y ±1.710
- Overall: 3.85 × 3.42 mm
- Stroke: 0.05 mm
Silkscreen
- Partial body outline at X up to +0.65 and Y ±1.46
- Stroke: 0.127 mm
- Pin-1 marker at
(−2.325, −0.975), radius0.10 mm, stroke0.20 mm - Reference text: 1.0 mm font; effective position approximately
(−0.0208, +2.8562) mm - Value text inactive
Table
| Pin | Name | Effective type | Pin description |
|---|---|---|---|
| 1 | VCC | Power In | Not populated |
| 2 | OUT | Output | Not populated |
| 3 | GND | Power In | Not populated |
Symbol positions are
Part-level properties
(57,29), (57,0), and (57,−29) respectively.- Manufacturer Name:
Texas Instruments - Part Type:
Sensor - Designator Prefix:
U - Manufacturer Part Number:
TMAG5231C1DQDBZR - Symbol Style:
parametric-v1 - Datasheet URL: Flux-hosted ingested copy shown above, sourced from the requested official TI URL
- Pinout: matches TI exactly: 1 VCC, 2 OUT, 3 GND.
- Pad size: footprint is 1.24 × 0.59 mm, versus TI recommendation 1.30 × 0.60 mm. Undersized by 0.06 × 0.01 mm.
- Pitch/spacing: pad centers use ±0.95 mm on the two-pin side, giving 1.90 mm center separation. Opposing-side center span is 2.11 mm, essentially TI’s 2.10 mm dimension (+0.01 mm).
- Package dimensions: TI confirms 1.12 mm maximum height and body 2.80–3.04 × 1.20–1.40 mm. The fab outline is 2.92 × 1.30 mm, matching the nominal midpoint.
- Pin descriptions: absent in the part. TI descriptions are:
- VCC: 1.65–5.5 V supply; TI recommends at least 0.1 µF ceramic to ground
- OUT: omnipolar output responding to north and south poles
- GND: ground reference
- Electrical types: OUT is correct. VCC and GND are both represented as
Power In; GND would conventionally be typed Ground. - Per instruction, these mismatches were reported only and not corrected.
Worked for 2 mins 52 sec
Created a project doc
TMAG5231C1DQDBZR Part Datasheet Audit
The part was checked against the official Texas Instruments TMAG5231 Low-Power, Hall Effect Switch, Rev. D (SLYS042D) datasheet. The live pr...
Audit complete. I added the official TI datasheet URL and verified the 3-pin mapping; key mismatches are the
SOT-23-5 package metadata, incorrect release-point text, missing pin descriptions, and slightly undersized footprint pads.Full results: TMAG5231C1DQDBZR Part Datasheet Audit.
Fix metadata issues
Align footprint pads
Run part checks
Verify BOM fields
