I’ll audit the part metadata, find and attach the official datasheet if missing, then compare symbol pins, footprint, and descriptions against the datasheet and summarize any discrepancies.
The part already has a datasheet attached; I also confirmed the official Renesas datasheet page. I’m now checking all 289 terminals and the BGA footprint against the Renesas pin table/package dimensions.
Completed the part audit and updated R7KA8T2LFLCAC#UC0 Part Review. The datasheet was already set, metadata is mostly correct, and the schematic has the correct 289-ball pin mapping, but I flagged a critical footprint unit-scaling defect: pads are 1000× too small, making the footprint non-manufacturable as-is.
Open items:
Footprint needs reimport/rescale to true 0.65 mm pitch and ~0.338 mm pad scale.
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film
Features:
- RMCF – standard power ratings
- RMCP – high power ratings
- Nickel barrier terminations standard
- Power derating from 100% at 70ºC to zero at +155ºC
- RoHS compliant, REACH compliant, and halogen free
- AEC-Q200 compliant
ARM Microcontrollers - MCU RA8T2 Dual core CM85 and CM33, MRAM 1MB / RAM 2MB, w/ EtherCAT BGA289,
Microcontroller with a 250 MHz Arm® Cortex®-M85 core for embedded control and real-time applications. Features up to 2 MB Flash, 1 MB SRAM, 10/100 Ethernet MAC, USB 2.0 High-Speed, CAN FD, I²C, SPI, UART, 12-bit ADC, and advanced timer peripherals for motor control and industrial applications.