Relay Part Audit

Thought for 11 mins 23 sec
Thought for 10 sec
Referenced guidance.
Created 4 tasks.
1/4 Inspect all available part metadata, symbol, footprint, and pin information

Inspect all available part metadata, symbol, footprint, and pin information

Find the official datasheet and set the Datasheet property if missing

Independently cross-check symbol, footprint, and pin descriptions against the datasheet

Document key specifications and mismatches

Thought for 23 sec — Inspecting schemas
Created a thread
Relay Part Audit
Completed
View Thread
Thought for 8 sec
Awaiting 1 background task
Received notification from "Relay Part Audit" that it finished — picking the work back up.

flux

I’m reconciling the completed audit now. I’ll verify the live part state directly because the project identity changed during the audit, then close any remaining gaps.

flux

Audit reconciled and documented in Relay Part Audit. The five-pad footprint matches the Omron mounting pattern, but the symbol lacks relay graphics, functional pin descriptions, and ERC pin types.
  • Critical mismatch: the project changed from G5LE-1 DC5 to G5LE-1 DC24 during the audit; several assets still retain DC5 naming.
  • Datasheet: official Omron K100-E1 was identified, but the stored property currently points to an uploaded copy rather than the direct manufacturer PDF.
  • Missing metadata: mount/package, contact form, coil ratings, contact ratings, temperature range, and terminal functions are not structured properties.
  • Footprint caution: 1.30 mm drills are at the datasheet’s minimum recommended diameter.
Correct part metadata
Fix symbol semantics
Resolve asset conflicts
Improve hole margin
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified

G5LE-1 DC24