Part Datasheet Review


Initial inspection shows this is a published part project with 36 terminal pins and a footprint/STEP model, but no Datasheet URL property is set. I’m searching for the official Amphenol datasheet now.
I found and set the official Amphenol G40H-series datasheet URL, and also filled missing Manufacturer Name and Part Type metadata. I’m now comparing the 36-position symbol and press-fit footprint against the Amphenol drawing/product spec.
Created a project doc

G40H11332HR Part Review

View Document

Date: 2026-07-14 Reviewed the available Flux part information for the published part project G40H11332HR and compared it with official Amphe...
Completed the G40H11332HR review and updated the part metadata with the official Amphenol datasheet URL, Manufacturer Name, and Part Type. The full findings are in G40H11332HR Part Review.
Open items:
  • Main risk: press-fit hole definition ambiguity — footprint uses Ø0.37 mm drill, while Amphenol specifies Ø0.37 mm finished PTH with Ø0.457 mm recommended drill.
  • Pin descriptions/groups are missing; usable, but lower quality for a high-speed connector.
  • Mounting hole nominal and footprint orientation should be visually checked against the official drawing before manufacturing.
Suggested next steps:
  1. Update/annotate the footprint for the press-fit finished-hole requirement.
  2. Add verified SFF-8643 pin descriptions and functional groups.
  3. Overlay the footprint/STEP model against the official Amphenol drawing.
Fix footprint and annotate
Fix press-fit holes
Verify mounting holes
Add pin descriptions
Run review checks

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
A1
A1
Passive
A2
A2
Passive
A3
A3
Passive
A4
A4
Passive
A5
A5
Passive
A6
A6
Passive
A7
A7
Passive
A8
A8
Passive
A9
A9
Passive
B1
B1
Passive
B2
B2
Passive
B3
B3
Passive
B4
B4
Passive
B5
B5
Passive
B6
B6
Passive
B7
B7
Passive
B8
B8
Passive
B9
B9
Passive
C1
C1
Passive
C2
C2
Passive
C3
C3
Passive
C4
C4
Passive
C5
C5
Passive

G40H11332HR