ES9822QPRO Review
Distribute all pins approximately evenly between the Left and Right sides of the schematic symbol.
Place power pins at the Top and first in Terminal Order. Place GND pins at the Bottom, Left, or Right and last in Terminal Order.
Keep related pins together, balance the symbol, and do not change pin names, numbers, or mapping.
Thought for 14 sec
I’ll rebalance the existing symbol metadata only: keep power at top/order first, keep GND/EPAD last, and split the remaining functional groups roughly evenly left/right without changing names, numbers, or mappings.
Worked for 30 sec
Rebalanced the symbol metadata while preserving all pin names, numbers, and mappings. The non-power/non-ground pins are now split approximately evenly: 14 Left and 15 Right, with power pins Top/orders 1–7 and GND/EPAD Bottom/orders 37–41.
Open items:
- None for this requested metadata change.
Suggested next steps:
- Review the rendered symbol for visual spacing.
- Optionally correct labels for pin 40 (
RT1) and pin 41 (EPAD) in a separate pass.
Fix labels and review
Correct pin labels
Populate pin metadata
Run ERC review
Check symbol layout
Name
Pin #
Type
Part Type
Pin Orientation
Section
Terminal Order
GPIO10
1
Unspecified
Terminal
left
Digital
22
GPIO11
2
Unspecified
Terminal
left
Digital
23
MODE
3
Unspecified
Terminal
left
Control
15
ACLK
4
Unspecified
Terminal
left
Input
8
AVCC
5
Unspecified
Terminal
top
Power
1
AGND
6
Unspecified
Terminal
bottom
Ground
37
XOUT
7
Unspecified
Terminal
right
Output
10
XIN
8
Unspecified
Terminal
left
Input
9
VREF_L
9
Unspecified
Terminal
top
Power
4
AVCC_L
10
Unspecified
Terminal
top
Power
2
AGND_L
11
Unspecified
Terminal
bottom
Ground
38
IN_P1
12
Unspecified
Terminal
left
Analog
11
IN_M1
13
Unspecified
Terminal
left
Analog
12
NC_1
14
Unspecified
Terminal
left
NC
33
NC_2
15
Unspecified
Terminal
left
NC
34
NC_3
16
Unspecified
Terminal
right
NC
35
NC_4
17
Unspecified
Terminal
right
NC
36
IN_M2
18
Unspecified
Terminal
right
Analog
14
ES9822QPRO
