Audit of the published part project against the official Texas Instruments BQ34Z100-G1 Wide Range Fuel Gauge with Impedance Track Technology, Rev. D datasheet and TI package drawing PW0014A.
Audit complete. The 14-pin names/numbers and TSSOP-14 footprint broadly match TI’s Rev. D datasheet, but the MPN/package metadata is incomplete, every pin lacks an electrical type and description, and the pad geometry differs slightly from TI’s current land-pattern example. The Datasheet URL was already populated, so it was not changed; the official TI URL is recorded in the Part Audit.
Open items
Existing MPN is BQ34Z100-G1, not the orderable BQ34Z100PW-G1.
Package metadata is missing.
Existing pads are 0.45 × 1.475 mm versus TI’s 0.45 × 1.50 mm example; row span is 5.876 mm versus 5.8 mm nominal.
Suggested next steps
Correct the MPN and package properties.
Populate all pin descriptions and electrical types.
Normalize the footprint to TI PW0014A geometry.
Replace the uploaded datasheet link with the official TI URL if manufacturer-hosted links are preferred.