Connector Part Audit


I’ll audit the connector metadata, find and attach the official datasheet if needed, then compare symbol, footprint, and pin descriptions against it and summarize any mismatches.
I found the part already has a JST datasheet URL set, so I’m using that as the official source and moving into the detailed cross-check.
Created a project doc

BM14B-SRSS-TB(LF)(SN) Part Audit

View Document

Date: 2026-07-21 Reviewed all available part information in the Flux part project for JST BM14B-SRSS-TB(LF)(SN): MPN, package/case, pin coun...
Completed the part audit and updated the Datasheet URL to the current official JST SR/SZ PDF. The full review is in BM14B-SRSS-TB(LF)(SN) Part Audit.
Open items flagged:
  • Package or Case Code = TO is incorrect for this SMT connector.
  • Description says through-hole and 1.0 A, but the official SR/SZ datasheet indicates SMT top-entry and 0.7 A AC/DC.
  • Symbol pins lack descriptions and are Unspecified; contacts should ideally be Passive, with MP pads described as reinforcement/mechanical pads.
  • Footprint dimensions look broadly correct; pin-1 marking should be visually confirmed/improved.
Suggested next steps:
  1. Update the package/case and description metadata.
  2. Add pin descriptions and set contact pin types to Passive.
  3. Add/verify a clear pin-1 marker on the footprint.
Fix metadata and pins
Update metadata
Improve pin metadata
Add pin-1 marker
Run ERC DRC

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified
9
9
Unspecified
10
10
Unspecified
11
11
Unspecified
12
12
Unspecified
13
13
Unspecified
14
14
Unspecified
MP1
MP1
Unspecified
MP2
MP2
Unspecified

BM14B-SRSS-TB(LF)(SN)