Part Information Review and Verification

flux

Pin metadata is updated; I’m now confirming the vendor datasheet URL and applying it if the part metadata is editable through the current tools.

flux

Verified the pin metadata and Microchip datasheet URL; I’m running ERC/DRC now.

flux

Updated the terminal pin types/descriptions and set the Datasheet URL to the Microchip-hosted PDF: https://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8700-seeprom-at24c01c-02c-datasheet.pdf.
Open items
  • ERC/DRC ran successfully at 2026-07-08T18:11:13.779Z; no errors, warnings, or open issues were returned.
  • The project-level Datasheet URL property is marked non-standard by Flux metadata tooling, but it is present and verified in the part project properties.
Suggested next steps
  1. Optionally update the part classification from broad “Integrated Circuits” to a more specific EEPROM/memory category if available.
  2. Re-run part review checks after publishing or library re-indexing to confirm the metadata propagates cleanly.
Classify and recheck
Fix part classification
Verify indexed metadata
Run full review
Prepare export package
Sign up to send

Files

Pins

Symbol

Layout

Preview

VCC
Pin Number
8
SCL
Pin Number
6
WP
Pin Number
7
A2
Pin Number
3
SDA
Pin Number
5
A0
Pin Number
1
A1
Pin Number
2
GND
Pin Number
4
Name
Pin #
Type
Part Type
Pin Description
Terminal Order
A0
1
Input
Terminal
Device address input bit A0; hard-wired input that must match the I2C device address bit.
A1
2
Input
Terminal
Device address input bit A1; hard-wired input that must match the I2C device address bit.
A2
3
Input
Terminal
Device address input bit A2; hard-wired input that must match the I2C device address bit.
GND
4
Ground
Terminal
Ground reference for the device power supply; connect to system ground.
SDA
5
Bi-Directional
Terminal
I2C serial data input/output; open-drain bus pin requiring an external pull-up.
SCL
6
Input
Terminal
I2C serial clock input; clocks data into and out of the EEPROM.
WP
7
Input
Terminal
Write-protect input; GND or floating allows normal writes, VCC/high write-protects the full array.
VCC
8
Power In
Terminal
Device power supply input; recommended operating range is 1.7 V to 5.5 V.

AT24C02C-SSHM-T

AT24C02C-SSHM-T thumbnail