Part Datasheet Review
Thought for 14 mins 54 sec
Thought for 7 sec
Steering Audit and repair ACT1210D-510-2P-TL00…
Created a thread
TDK ACT1210D Audit
Completed
View Thread
Thought for 6 sec
Awaiting 1 background task
"TDK ACT1210D Audit" completed.
Thought for 10 mins 14 sec
Thought for 8 sec
Reading TDK ACT1210D Audit's report…
Thought for 8 sec — Updating tasks and reviews
4/4 Run an independent post-fix review and summarize findings
Inspect current part metadata, symbol, footprint, pins, and 3D geometry
Verify dimensions, pinout, and specifications against the official TDK datasheet
Correct any footprint, symbol, metadata, or model discrepancies
Run an independent post-fix review and summarize findings
Thought for 9 sec
Created a thread
ACT1210D Audit
Completed
View Thread
Thought for 5 sec
Awaiting 1 background task
"ACT1210D Audit" completed.
Thought for 37 sec
Completed the official TDK datasheet audit and corrected metadata, pin descriptions, 1.05 × 0.40 mm pads, displaced graphics, and the symbol-side placement of pins 3/4. Final bounds are 4.10 × 1.60 mm copper and 3.35 × 2.85 mm silkscreen, resolving the malformed 20.67 × 6.1 mm geometry reported in FLUX-16301.
- FLUX-16295’s issue body was inaccessible, so its exact complaint could not be independently attributed.
- Binary limitations prevented independently recomputing the 3D mesh bounds; the existing model otherwise passed available scale/orientation checks.
Full specifications, evidence, edits, and limitations: Part Audit Report.
