Part Review and Description Update

Worked for 3 mins 48 sec
Thought for 5 sec
Created 3 tasks.
1/3 Inspect project/part metadata, schematic pins/properties, BOM, and footprint
Thought for 5 sec
Reading the BOM.
Getting project info.
Reading schematic details.
Reading layout details.
Thought for 11 sec
2/3 Find or query official datasheet and update Datasheet property if missing

Inspect project/part metadata, schematic pins/properties, BOM, and footprint

Find or query official datasheet and update Datasheet property if missing

Cross-check symbol, footprint, and pin descriptions; summarize specs/mismatches

Thought for 6 sec
Found 1 results for WL-SMCW_0603 official datasheet.
Found 1 results for WL-SMCW_0603 Wurth Elektronik datasheet.
Found 1 results for WL-SMCW 0603 SMCW datasheet LED.
Thought for 7 sec
Set Datasheet URL.
Thought for 6 sec
Read we-online.com.
Read 150060RS75003.pdf.
Thought for 7 sec — Assessing layout issues
Read self we-online.com.
Completed 6 design checks — found 1 issue.
Reading layout details.
Reading "[Datasheet for WL-SMCW_0603] WL-SMCW 0603 package dimensions pin configuration polarity recommended land pattern anode cathode pad layout" in we-online.com.
Read we-online.com.
C

cherepanyadima

Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description

flux

Best concise description: Würth Elektronik WL-SMCW 0603 surface-mount mono-color chip LED with water-clear lens, 1.6 × 0.8 mm package, 2-pin polarity-marked SMT footprint. I’ll use this wording for the part description unless you prefer a color-specific variant.

flux

Done — I updated the part description to the concise datasheet-based wording and added the official Würth WL-SMCW family page as the Datasheet URL.
Open items:
  • The MPN WL-SMCW_0603 is family/package-level, not a specific order code, so exact color/Vf/wavelength specs can’t be locked down yet.
  • Pin descriptions should be updated to: pin 1 = cathode (-), pin 2 = anode (+).
  • Package R0603 may be misleading for an LED; 0603 or LED_0603 would be clearer if supported.
Suggested next steps:
  1. Provide the exact Würth order code/color variant.
  2. Update pin descriptions and package labeling.
  3. Re-run part review after the exact variant is assigned.
I also created a concise review file: wl-smcw0603-part-review.
Fix pins and review
Set exact variant
Fix pin descriptions
Change package label
Run final checks
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Terminal Order
-
1
Passive
Terminal
+
2
Passive
Terminal

150060VS75000