Part Review: HARTING 09185606324
Concise description
HARTING SEK Low-profile 60-position 2-row straight male IDC header, 2.54 mm pitch, through-hole wave-solder, 2.9 mm tails, PL2.
Source reviewed
Key datasheet specs
- Manufacturer: HARTING
- Manufacturer part number: 09 18 560 6324 / 09185606324
- Specification: SEK-18 SV MA LP STR29 60P PL2
- Series: SEK Low-profile
- Type: Male connector/header
- Connection: PCB-to-cable / PCB-to-PCB
- Termination: Wave soldering, through-hole
- Contact style: Straight
- Contact count: 60
- Rows: 2
- Pitch / contact spacing: 2.54 mm
- Termination length: 2.9 mm
- Rated current: 1 A
- Test voltage: 1 kV RMS
- Insulation resistance: >1 GΩ
- Contact resistance: ≤20 mΩ
- Temperature range: -55 °C to +125 °C
- Mating cycles: ≥250
- Performance level: 2 per IEC 60603-13
- Insert material: PBT thermoplastic, grey, UL 94 V-0
- Contact material/plating: copper alloy; noble metal over Ni mating side; Sn over Ni termination side
- Packaging size: 50
- Net weight: 6.9 g
Symbol check
- The schematic contains 60 terminal entries with pin numbers 1 through 60.
- Pin count matches the datasheet contact count.
- The symbol arrangement is two-sided with odd-numbered contacts on the left and even-numbered contacts on the right, which is appropriate for a 2-row connector representation.
- Pin Type is set to
Unspecified for all terminals. For a passive connector this is acceptable, though Passive would be more semantically precise.
- Pin descriptions are not populated beyond pin numbers. For this connector, the datasheet does not assign unique signal names, so numeric pin labeling is sufficient.
Footprint check
- The PCB footprint contains 60 pad nodes plus footprint/container/shape/text nodes.
- Pad count matches the datasheet contact count.
- The footprint is consistent at a high level with a 60-position through-hole connector.
- Detailed mechanical verification is limited because the inspected layout data did not expose pad geometry, drill size, pitch, row spacing, or full body outline dimensions. These should be checked against the HARTING drawing before release.
Mismatches / risks flagged
- No hard mismatch found for MPN, manufacturer, contact count, or high-level connector type.
- Existing Datasheet URL is an uploaded PDF rather than the official HARTING product page; acceptable because a datasheet is present, but the official page is https://harting.com/09185606324.
- Pin Type is
Unspecified; recommend changing terminals to Passive if strict library hygiene is desired.
- Footprint geometry needs dimensional verification against the manufacturer drawing: 2.54 mm pitch, 2 rows, 2.9 mm tail length, and 60-contact body dimensions.