Molex Part Audit
Thought for 7 sec
I’ll audit the part metadata, find and attach an official datasheet if missing, then compare the symbol/footprint/pin descriptions against the datasheet and summarize any mismatches.
Worked for 5 mins 34 sec
I found the official Molex customer drawing for 524372271 and added it as the part’s Datasheet URL; now I’m checking the terminals and footprint against that source.
Worked for 24 mins 54 sec
Created a project doc
Part Audit - Molex 0524372271 / 52437-2271
Date: 2026-07-14 Reviewed available part metadata, schematic symbol terminals, footprint/land pattern data, and pin descriptions for the pub...
Completed the part audit and added the official Molex drawing as the part’s Datasheet URL. I created the detailed report here: Part Audit - Molex 0524372271 / 52437-2271.
Open items:
- Likely footprint mismatch: P1/P2 fitting-nail pads appear inward and slightly oversized versus the Molex drawing.
- Symbol metadata is incomplete: pin descriptions are missing and all pin types are
Unspecified.
Suggested next steps:
- Update P1/P2 footprint pads after final visual confirmation against the Molex drawing.
- Add pin descriptions for pins 1–22 and P1/P2.
- Change pin types from
Unspecifiedto passive/mechanical as appropriate.
I also filed an internal Flux part-quality report for the likely fitting-nail footprint issue.
Fix pads and metadata
Fix P1/P2 pads
Add pin descriptions
Run footprint review
Export audit evidence
