Make me a temperature and humidity sensor node wit
Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.
It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.
Thought for 2 sec
I can’t execute design changes right now because this account has no available ACUs, so AI project-editing features are unavailable.
Current project state:
- New empty project: “Easy Salmon Neuralizer”
- Components: 0
- Nets: 0
- No schematic or PCB work has been added yet.
What remains to be done once ACUs are available:
- Create the project specification for a USB-C powered Wi-Fi/Bluetooth temperature and humidity sensor node.
- Select the wireless MCU/module, likely an ESP32-class module with 2.4 GHz Wi-Fi 802.11 b/g/n and BLE 5.x.
- Select a digital temperature/RH sensor, e.g. Sensirion/TE/SiLabs class I2C sensor.
- Design USB-C 5 V input with CC pull-downs, ESD, reverse protection, OVP, UVLO, OCP/current limiting, and support assumptions for 0.5–3 A sources.
- Add 5 V to 3.3 V regulation sized from a power budget.
- Wire MCU, sensor, programming/debug, boot straps, decoupling, antenna keepout, and consumer-use protection.
- Run ERC/DRC-style checks and create bring-up, firmware, and compliance notes for the wireless consumer product.
No schematic yet
Talk to Flux to get started.
