BQ25185 Charger Topology

flux

La evidencia disponible confirma únicamente que A–E son los cinco contactos internos disponibles en el perfil reducido; no contiene una asignación funcional oficial por letra. Mantendré cada función como dependiente del perfil y separaré los bloques candidatos —analógico U10, contactos de relé, potencia LM5069 y chasis— sin asignarlos a pines por suposición.
Created a project doc

Phase 12 — Universal Remote 14 Profile Architecture

View Document
State: BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION Scope: Architecture/documentation only. No schematic, PCB, nets, footprints, ...

flux

Fase 12 completada en modo de sólo lectura. La arquitectura conserva los 14 contactos físicos, limita R14-ABCDE a A–E y mantiene todos los contactos sin función documentada aislados; G no se trata como retorno universal.
Phase 12 — Universal Remote 14 Profile Architecture
No se modificó el diseño. BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION.
Review profiles and blockers
Update completion plan
Check architecture consistency
Prepare input forms
Run full review

Refine this doc
Ask about this doc
Component and Footprint Qualification Matrix
Mandatory status: BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION
Scope: Read-only audit of the current 69-designator project. No schematic, PCB, nets, BOM, libraries, placement, or routing were modified.
Status Definitions
  • Symbol: VERIFIED_EXACT, SAFE_PROXY, SYMBOL_MISMATCH, LIBRARY_MISSING.
  • Footprint: VERIFIED_EXACT, FOOTPRINT_MISMATCH, FOOTPRINT_MISSING, GENERIC_PLACEHOLDER.
  • Manufacturing risk: SAFE_FOR_SCHEMATIC_ONLY, BLOCKS_PCB, BLOCKS_FABRICATION.
Matrix — Active, Electromechanical and Inductive Components

Table

RefExact MPN requiredMPN/current partSymbol statusFootprint statusPin verificationPad/mechanical verificationOfficial sourceRiskRequired action
J1DX07S016JA3R1500DX07S016JA1R1500 proxyUNSAFE_PROXYFOOTPRINT_MISMATCH / FOOTPRINT_MISSING_EXACTThe family-level contact set does not establish a safe substitute; exact JA3 pin numbering must be validatedJA1 shell-DIP 0.9 mm vs JA3 1.2 mm. SJ122205 is the authoritative connector mechanical/PCB drawing; SJ122206 is packaging onlyJAE SJ122205; JAE product page; LCSC/JLCPCB C3197625BLOCKS_PCBJ1_LIBRARY_GAP / CUSTOM_OR_IMPORTED_FOOTPRINT_REQUIRED: validate pads, numbering, shell tabs, holes/slots, cutout, edge datum, orientation and permitted PCB thickness against SJ122205; compare 1:1 with EasyEDA C3197625. Do not substitute JA1
U1TPD4E05U06DQARTPD4E02B04DQARSYMBOL_MISMATCHVERIFIED_EXACTPins are position-compatible: target D1+/D1−/GND/D2+/D2−/NC/GND maps numerically to current IO1/IO2/GND/IO3/IO4/NC/GND; electrical ESD device is differentBoth official TI DQA USON-10, 1.0×2.5 mm, 0.5 mm pitch, 10 pads, same DQA land-pattern classTI TPD4E05U06 and TPD4E02B04 datasheetsBLOCKS_FABRICATIONReplace MPN with TPD4E05U06DQAR and revalidate clamping/capacitance requirements
U2CP2102N-A02-GQFN28CP2102N-A02-GQFN28VERIFIED_EXACTVERIFIED_EXACTPins 1–28 and center GND match official tableQFN28 5×5 mm, 0.5 mm pitch, 28 perimeter pads + center GND padSilicon Labs CP2102N official datasheetSAFE_FOR_SCHEMATIC_ONLYRetain; final PCB still requires DFM review
U3BQ25185DLHRBQ25185DLHRVERIFIED_EXACTVERIFIED_EXACTPins 1 SYS, 2 BAT, 3 STAT2, 4 CE, 5 GND, 6 TS/MR, 7 ILIM/VSET, 8 ISET, 9 STAT1, 10 IN, EP match TIDLH/WSON-10 official package; SYS/CE correction independently verifiedTI BQ25185 datasheetSAFE_FOR_SCHEMATIC_ONLYRetain; preserve SYS/CE separation
U4BQ29700DSERBQ29700DSERVERIFIED_EXACTVERIFIED_EXACTPins 1 NC, 2 COUT, 3 DOUT, 4 VSS, 5 BAT, 6 V− match TIDSE0006A WSON-6, 1.5×1.5 mm, 0.5 mm pitch, 6 padsTI BQ2970 datasheetSAFE_FOR_SCHEMATIC_ONLYRetain; COUT/DOUT remain open until protection FET network defined
U5TPS7A2033PDBVRTPS7A2033PDBVRVERIFIED_EXACTVERIFIED_EXACT1 IN, 2 GND, 3 EN, 4 NC, 5 OUT match TIDBV SOT-23-5, 2.9×2.8 mm, 5 padsTI TPS7A20 datasheetSAFE_FOR_SCHEMATIC_ONLYRetain
U6LM5069MM-1/NOPBLM5069MMX-1/NOPB proxySAFE_PROXYVERIFIED_EXACTExact 1 SENSE, 2 VIN, 3 UVLO, 4 OVLO, 5 GND, 6 TIMER, 7 PWR, 8 PGD, 9 OUT, 10 GATEBoth DGS VSSOP-10; MM/MMX changes reel quantityTI LM5069 datasheet/addendumSAFE_FOR_SCHEMATIC_ONLYSelect procurement suffix; electrical/package proxy accepted
U7LM5164DDARLM5164DDARVERIFIED_EXACTVERIFIED_EXACT1 GND, 2 VIN, 3 EN/UVLO, 4 RON, 5 FB, 6 PGOOD, 7 BST, 8 SW, EP match current symbolDDA PowerSOIC-8 with EP present; package identity matches official orderableTI LM5164 datasheetSAFE_FOR_SCHEMATIC_ONLYRetain; final land pattern/thermal vias require DFM review
U8TPS63030DSKRTPS63030DSK base proxySAFE_PROXYVERIFIED_EXACTExact match: 1 VOUT, 2 L2, 3 PGND, 4 L1, 5 VIN, 6 EN, 7 PS/SYNC, 8 VINA, 9 GND, 10 FB, EP PGNDDSK0010A 2.5×2.5 mm, 0.5 mm pitch, 10 pads + EP 1.2×2.0 mmTI TPS63030 datasheet/addendumSAFE_FOR_SCHEMATIC_ONLYUse exact DSKR BOM identity; decide PS/SYNC policy
U9CC1354P106T0RGZRCC1352P1F3RGZR proxySAFE_PROXYVERIFIED_EXACTCurrent pins 1–48 and EP match official CC1354P106T0 RGZ table exactlyRGZ VQFN-48 7×7 mm, 0.5 mm pitch, exposed ground pad; current package class matchesTI CC1354P10 datasheetSAFE_FOR_SCHEMATIC_ONLYReplace library identity with exact MPN before firmware/BOM sign-off
U10MCP41HV51-503E/STMCP45HV51-ST proxySYMBOL_MISMATCHVERIFIED_EXACTMajor mismatch: target 2 CS, 3 SCK, 4 SDI, 5 SDO, 7 SHDN, 8 DGND, 9 V−, 10/11/12 P0B/W/A, 13 V+, 14 NC; proxy is I²C and shiftedBoth TSSOP-14, 4.4 mm body, 0.65 mm pitch; package is physically compatible but pad functions differMicrochip MCP41HVX1 datasheetBLOCKS_PCBCreate exact MCP41HV51 symbol and rewire all pins; do not copy proxy mapping
Q1CSD19536KTTCSD19536KTTVERIFIED_EXACTVERIFIED_EXACT1 Gate, 2 Drain, 3 Source match TI/current symbolTO-263-3 / DDPAK package identity matchesTI CSD19536KTT datasheetSAFE_FOR_SCHEMATIC_ONLYRetain; verify SOA/thermal copper before fabrication
Q2CSD16406Q3CSD16406Q3VERIFIED_EXACTVERIFIED_EXACTPins 1/2/3 Source, 4 Gate, 5/6/7/8 Drain, EP match packageDFN-8 3.3×3.3 mm, 0.65 mm + EPTI CSD16406Q3 datasheet/library entrySAFE_FOR_SCHEMATIC_ONLYKeep DNP, all pins NC
Q3CSD16406Q3CSD16406Q3VERIFIED_EXACTVERIFIED_EXACTSame as Q2Same as Q2TI CSD16406Q3 datasheet/library entrySAFE_FOR_SCHEMATIC_ONLYKeep DNP, all pins NC
Q4CSD13380F3CSD13380F3T proxySAFE_PROXYVERIFIED_EXACT1 Gate, 2 Source, 3 Drain exactSame YJM/PICOSTAR 3-pin; T suffix is small reel onlyTI CSD13380F3 datasheet/addendumSAFE_FOR_SCHEMATIC_ONLYSelect reel suffix
Q5CSD13380F3CSD13380F3T proxySAFE_PROXYVERIFIED_EXACTSame as Q4Same as Q4TI CSD13380F3 datasheet/addendumSAFE_FOR_SCHEMATIC_ONLYSelect reel suffix
Q6CSD13380F3CSD13380F3T proxySAFE_PROXYVERIFIED_EXACTSame as Q4Same as Q4TI CSD13380F3 datasheet/addendumSAFE_FOR_SCHEMATIC_ONLYSelect reel suffix
D1PMEG2010AEBPMEG2010AEB,115SAFE_PROXYVERIFIED_EXACT1 cathode, 2 anode matches current symbolSOD-523 2-pad package identity matches; ,115 is orderable packaging suffixNexperia PMEG2010AEB datasheetSAFE_FOR_SCHEMATIC_ONLYRetain; confirm current/pulse rating for relay coil
D2PMEG2010AEBPMEG2010AEB,115SAFE_PROXYVERIFIED_EXACTSame as D1Same as D1Nexperia PMEG2010AEB datasheetSAFE_FOR_SCHEMATIC_ONLYRetain
D3PMEG2010AEBPMEG2010AEB,115SAFE_PROXYVERIFIED_EXACTSame as D1Same as D1Nexperia PMEG2010AEB datasheetSAFE_FOR_SCHEMATIC_ONLYRetain
K1G5LE-14-DC5G5LE-1-DC5 proxySYMBOL_MISMATCHFOOTPRINT_MISMATCHOfficial target: 1 COM, 2 coil, 3 NO, 4 NC, 5 coil. Current schematic incorrectly treats 4/5 as coil and 1/2/3 as contactsProxy family body is similar, but exact sealed -14 footprint/pad numbering is not safely bound to current symbolOmron G5LE official datasheetBLOCKS_PCBCreate exact relay; connect coil pins 2/5; keep 1/3/4 external open
K2G5LE-14-DC5G5LE-1-DC5 proxySYMBOL_MISMATCHFOOTPRINT_MISMATCHSame as K1Same as K1Omron G5LE official datasheetBLOCKS_PCBSame correction as K1
K3G5LE-14-DC5G5LE-1-DC5 proxySYMBOL_MISMATCHFOOTPRINT_MISMATCHSame as K1Same as K1Omron G5LE official datasheetBLOCKS_PCBSame correction as K1
L1MSS1246T-683MLB, 68 µH ±20%Generic InductorSAFE_PROXYFOOTPRINT_MISMATCHTwo passive non-polarized pins are logically safeCurrent footprint is much smaller than official 12×12×4.6 mm body; target pads ≈5.5×5.0 mm with 4.0 mm inner gapCoilcraft MSS1246T datasheetBLOCKS_PCBCreate exact MSS1246T footprint; verify current/thermal rating
L2Exact MPN not specified; 2.2 µH requiredGeneric Inductor, 2.2 µHSAFE_PROXYGENERIC_PLACEHOLDERTwo passive pins correct0805 generic 2-pad footprint, but no manufacturer MPN/current/saturation dataCurrent project brief onlyBLOCKS_FABRICATIONSelect exact 2.2 µH 0805 inductor and verify Isat/DCR/Irms
Matrix — Capacitors (Every Designator)
All capacitor symbols are electrically safe two-pin proxies. Because no exact capacitor MPN is specified, each footprint remains a GENERIC_PLACEHOLDER and blocks fabrication qualification. Pad count is two; package size is configured, but dielectric, tolerance, DC-bias derating, ESR and manufacturer land-pattern evidence are incomplete.

Table

RefExact requirementCurrentSymbolFootprintPinsPads/sourceRiskRequired action
C1100 nF, 0603Generic 100 nF 0603SAFE_PROXYGENERIC_PLACEHOLDER2 passive pins verified2 pads, generic 0603; no exact MPNBLOCKS_FABRICATIONSelect exact capacitor MPN
C24.7 µF, 0603Generic 4.7 µF 0603SAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect voltage/dielectric-rated MPN
C347 pF C0G, 0603Generic 47 pF 0603SAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact C0G MPN
C41 µF, 25 V, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact 25 V MPN
C510 µF, 25 V, 0805GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0805; effective C after bias unverifiedBLOCKS_FABRICATIONSelect X5R/X7R MPN with ≥1 µF effective at SYS voltage
C61 µF, 10 V, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact MPN
C7100 nF, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact MPN
C81 µF, 10 V, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact MPN
C91 µF, 10 V, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact MPN
C102.2 µF, 100 V, 1210GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 1210; DC-bias/ripple unverifiedBLOCKS_FABRICATIONSelect exact 100 V MPN
C112.2 nF, 50 V, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact MPN
C1222 µF, 25 V, 1210GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 1210BLOCKS_FABRICATIONSelect exact MPN/ripple rating
C1310 µF, 6.3 V, 0805GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0805BLOCKS_FABRICATIONSelect exact MPN
C1422 µF, 6.3 V, 0805GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0805BLOCKS_FABRICATIONSelect exact MPN/effective capacitance
C1522 µF, 6.3 V, 0805GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0805BLOCKS_FABRICATIONSelect exact MPN
C16100 nF, 0402GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0402BLOCKS_FABRICATIONSelect exact MPN
C17100 nF, 0402GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0402BLOCKS_FABRICATIONSelect exact MPN
C18100 nF, 0402GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0402BLOCKS_FABRICATIONSelect exact low-ESR MPN
C19100 nF, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDERVerifiedGeneric 0603BLOCKS_FABRICATIONSelect exact MPN
Matrix — Resistors (Every Designator)
All resistor symbols are electrically safe two-pin proxies. No exact resistor MPN is specified, so each configured package is a GENERIC_PLACEHOLDER. Two-pad count and nominal package sizes are present, but manufacturer land pattern, voltage coefficient, pulse rating and exact tolerance/power qualification are incomplete.

Table

RefExact requirementCurrentSymbolFootprintPins/padsRiskRequired action
R15.1 kΩ 1%, 0603Generic exact valueSAFE_PROXYGENERIC_PLACEHOLDER2 pins/2 padsBLOCKS_FABRICATIONSelect USB-C Rd qualified MPN
R25.1 kΩ 1%, 0603Generic exact valueSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R322.1 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R447.5 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R51 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R624 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect precision MPN; preserve program value
R721.5 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect precision MPN; preserve ≈14 mA ICHG
R82.2 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R90.100 Ω, 1 W, 2512GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2; Kelvin/pulse geometry not verifiedBLOCKS_FABRICATIONSelect exact current-sense MPN and verify power/pulse/TCR
R10100 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R1142.2 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R12100 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect precision MPN
R1331.6 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect precision MPN
R141 MΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect precision MPN
R15200 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect precision MPN
R1610 kΩ, 0402GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R1710 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R1810 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R191 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R201 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R211 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R2210 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R2310 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R2410 kΩ 1%, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
R2510 kΩ, 0603GenericSAFE_PROXYGENERIC_PLACEHOLDER2/2BLOCKS_FABRICATIONSelect exact MPN
Final Lists
A. Exact symbol and footprint verified
  • U2 CP2102N-A02-GQFN28
  • U3 BQ25185DLHR
  • U4 BQ29700DSER
  • U5 TPS7A2033PDBVR
  • U7 LM5164DDAR
  • Q1 CSD19536KTT
  • Q2, Q3 CSD16406Q3 — DNP only
B. Electrically safe proxies, but library/BOM qualification remains
  • U6 LM5069MMX-1/NOPB for LM5069MM-1/NOPB — same pinout/package, reel difference
  • U8 TPS63030DSK for TPS63030DSKR — same DSK pinout/package, orderable suffix difference
  • U9 CC1352P1F3RGZR symbol/footprint for CC1354P106T0RGZR — pin/package verified, silicon identity differs
  • Q4, Q5, Q6 CSD13380F3T for CSD13380F3 — same device/package, reel difference
  • D1, D2, D3 PMEG2010AEB,115 for PMEG2010AEB — packaging suffix
  • All R1–R25 and C1–C19 symbols are safe for schematic only; exact purchasable MPNs are absent
  • L2 generic 2.2 µH symbol is schematic-safe only
C. Incorrect pinout, MPN function, or footprint
  • J1: footprint mismatch, JA1 vs JA3 shell-DIP geometry
  • U1: target TPD4E05U06DQAR differs electrically from current TPD4E02B04DQAR, despite same pin/package geometry
  • U10: MCP45HV I²C proxy pinout is incompatible with MCP41HV51 SPI target
  • K1, K2, K3: official coil/contact pin functions conflict with current proxy wiring
  • L1: generic footprint is not the 12×12 mm MSS1246T footprint
D. Exact library components missing or not demonstrated
  • DX07S016JA3R1500
  • CC1354P106T0RGZR exact library identity
  • MCP41HV51-503E/ST
  • G5LE-14-DC5
  • MSS1246T-683MLB
  • Exact purchasable MPNs for all generic capacitors, resistors and L2
Manufacturing Gate
The project remains BENCH_ONLY. The following block fabrication release: J1, U1 target mismatch, U10, K1–K3, L1, every generic passive without an exact MPN, battery selection, LM5069 programming networks, RF interfaces, and external relay contacts.

  • Component and Footprint Qualification Matrix

  • Status Definitions

  • Matrix — Active, Electromechanical and Inductive Components

  • Matrix — Capacitors (Every Designator)

  • Matrix — Resistors (Every Designator)

  • Final Lists

  • A. Exact symbol and footprint verified

  • B. Electrically safe proxies, but library/BOM qualification remains

  • C. Incorrect pinout, MPN function, or footprint

  • D. Exact library components missing or not demonstrated

  • Manufacturing Gate

Brand NewDay Shadow PCB thumbnail
Clean-room BENCH_ONLY shadow schematic and 4-layer PCB proposal for Brand NewDay; not for fabrication or energization.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Arrow

$16.31–$23.75

Digi-Key

$1.18

HQonline

$1.84–$1.93

LCSC

$23.10–$23.17

Mouser

$44.55

TME

$9.46–$9.54

Verical

$14.93–$273.65

Controls