Boost Regulator Components

senkeiiz

senkeiiz

agregame una resistencia de 10k y una fuente de dc de 5v hare un regulador boost

flux

Aquí tienes la sugerencia para agregar los componentes en tu esquemático:
  • Resistencia de 10kΩ:
    Agrega una resistencia de 10k (por ejemplo, R1).
  • Fuente DC de 5V:
    Agrega una fuente de voltaje DC de 5V (por ejemplo, V1).
Puedes usar la opción "Apply changes" para incluir estos componentes en tu proyecto.
Add 10kΩ resistor
Add 5V DC source
Sign up to send

Files

Schematic

Layout

Preview

Check that all reset/enable have an external pull-up or pull-down resistors. Rep...
senkeiiz

senkeiiz

@copilot Check that all reset/enable have an external pull-up or pull-down resistors. Report action items in an ordered list.
1y

copilot

Based on the project description, it doesn't appear that there's explicit mention of any reset or enable pins that would typically require external pull-up or pull-down resistors. However, let's evaluate the components for possible reset/enable functions:
  1. Arduino Uno R3: Usually has reset functionality. If a reset pin is used, it should be connected to a pull-up resistor if needed. Verify if there's a reset connection and add a resistor if absent.
  2. IRFZ44N MOSFET ($Q1$): Often, pull-down resistors are used on the gate to ensure it turns off when not driven. Check for a connected pull-down resistor on the gate.
  3. SR540 Diode ($D1$): Typically doesn't require pull-up or pull-down resistors.
Action Items:
  1. Verify and add pull-up resistor if necessary to the reset pin of the Arduino Uno R3.
  2. Verify and add a pull-down resistor to $Q1$'s gate if not already present.
If any additional components have reset/enable functions not covered here, please let me know so we can address them as well.
1y
1
V1
C1
Capacitance
47uF
R1
Resistance
10kΩ
L1
Inductance
100uH
Q1
D1
Arduino Uno R3 PINOUT4
No files yet