Schematic Design Request

flux

0:16

Do you want me to create the schematic inside your Flux project, or just describe the schematic in detail here? If you want it created, tell me key requirements so I can plan it properly:
  • Which XIAO variant (e.g., ESP32C3, ESP32S3, RP2040)?
  • LED types you must support (5V WS2812/WS2813, 12V WS2815), and how many channels/ports?
  • Power input options (USB-C only, external DC jack/terminal, both) and max current?
  • Protection/features: level shifting, fuse, TVS, reverse polarity, buck regulator, on/off switch, current sensing?
  • Optional: UART header, boot buttons, status LEDs, I2C expansion.
149 days
koryfargo

koryfargo

create in new project for me. ESP32C6. 24v FCOB RGBWCCT.
149 days

flux

0:38

Got it — I’ll create a new ESP32‑C6 RGBW+CCT (6‑channel) 24V LED driver project and schematic.
Plan summary:
  1. New project with ESP32‑C6, 24V input, RGBW+CCT strip connectors.
  2. Add protections, DC‑DC for 5V/3.3V, and decoupling.
  3. Six MOSFET channels with proper gate drive and PWM mapping.
  4. Boot/program header, pull‑ups, filters; wire all nets.
  5. Run checks and note layout/thermal guidance.
Before I start, quick confirms:
  • Target current per channel (e.g., 3 A, 5 A)?
  • Preferred strip interface: one 8‑pin output (24V, GND, R,G,B,W,CW,WW) or multiple connectors?
  • Any must‑have protections: e-fuse, reverse polarity via ideal diode, TVS at input/outputs?
Click Start on the plan bar and I’ll proceed.
Specify LED current
Define connector style
Set protection requirements
Constrain module choice
Ask about MOSFET topology
149 days
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    step

    LED Driver Board for Seeed Studio XIAO v1.step

    LED Driver Board for Seeed Studio XIAO v13D Model
    Adobe Express - file.png

    Adobe Express - file.png

    Adobe Express - fileThumbnail

    LED Driver Board for Seeed Studio XIAO

    LED Driver Board for Seeed Studio XIAO thumbnail
    This LED driver board is a compact yet powerful solution supporting both 5V and 12V LED strips, including popular addressable RGB LEDs such as NeoPixel WS2812, WS2813, WS2815. Compatible with all XIAO boards, it enables smart control and automation through WLED and Home Assistant when using XIAO ESP32 Series, while offering flexible power options and comprehensive protection for safe, reliable operation in your lighting setup.

    Properties

    105100021

    seeed studio

    seeedstudio.com/LED-Driver-Board-for-Seeed-Studio-XIAO-p-6451.html

    Pricing & Availability

    Distributor

    Qty 1

    Controls