A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V

A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated.

Power Supply Controller Push Button, On/Off Controller TSOT-23-8 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #PowerSupply #Monitor #LTC2954

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

10 (8 + 2) Position Card Connector Secure Digital - microSD™ Surface Mount, Right Angle Gold microSD socket push push The DM3AT-SF-PEJM5 is a low-profile, surface-mount microSD card connector from Hirose Electric featuring a push-push insertion and ejection mechanism. Designed for compact and portable electronic devices, it supports standard microSD, microSDHC, and microSDXC cards. The connector provides reliable electrical contact through gold-plated copper alloy terminals and is rated for up to 10,000 insertion/removal cycles, ensuring long-term durability. With a right-angle SMT configuration, integrated card detection switch, and robust mechanical retention, this connector is well-suited for applications such as embedded systems, IoT devices, consumer electronics, and industrial equipment where space efficiency and dependable card interfacing are critical. Product Category: Memory Card Connectors Product Type: Card Connector Subcategory: Memory Connectors & Sockets Card Type: microSD Number of Contacts: 8 Number of Rows: 1 Pitch: 1.1 mm Mounting Type: PCB Mount Mounting Style: Standard Orientation: Right Angle Termination Style: SMD/SMT Insertion / Extraction Style: Push-Push Mating Cycles: 10,000 Current Rating: 500 mA Voltage Rating: 125 VAC Contact Material: Copper Contact Plating: Gold Housing Material: Liquid Crystal Polymer (LCP) Insulation Resistance: 1 GΩ Height: 1.68 mm Length: 13.85 mm Operating Temperature Range: -25°C to +85°C Color: Black Packaging Options: Reel, Cut Tape, MouseReel Factory Pack Quantity: 1500 RoHS Compliance: Yes Country of Origin: China Country of Assembly: China Country of Diffusion: China Unit Weight: 0.003527 oz #commonpartslibrary #connector #memory #cardsocket #microsd

Voltage Level Translator Bidirectional 1 Circuit 8 Channel 60Mbps 20-TSSOP This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pulldown resistor. The current-sourcing capability of the driver determines the minimum value of the resistor. • No direction-control signal needed • Maximum data rates: – 110Mbps (push pull) – 1.2Mbps (open drain) • 1.4V to 3.6V on A port and 1.65V to 5.5V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – either VCCA or VCCB can be ramped first • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22 (A port): – 2000 V Human Body Model (A114-B) – 150 V Machine Model (A115-A) – 1000 V Charged-Device Model (C101) • IEC 61000-4-2 ESD (B-port): – ± 8kV Contact Discharge – ± 6kV Air Discharge #commonpartslibrary #integratedcircuit #logic #translator #levelshifter

Projected Plunger LATCHING Straight DPDT PCPin White Plugin Push Switches ROHS

6 Position Push In, Pull Out Right Angle SMT Gold NANO SIM Card Connector #CommonPartsLibrary #connector #Memory #PcCard

UART, Single wire input, Output 40mA, Open Collector or Push Pull, PDIP-20 serial to parallel DIP*W7.62mm*

Projected Plunger LATCHING Straight DPDT PCPin White 180gf@±50gf Plugin Push Switch ROHS #commonpartslibrary #switch

Tactile Switch SPST-NO Top Actuated Push Button Through-hole THT 50mA 12V Plugin 6x6mm #switch #commonpartslibrary

Power Supply Controller Push Button, On/Off Controller TSOT-23-8 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LTC2950

Connector Header Through Hole 6 position 0.100" (2.54mm) The PEC06SAAN is a compact, low-cost incremental rotary encoder manufactured by Bourns. It is designed for user interface applications requiring precise rotational input, such as volume controls, menu navigation, and position sensing. This encoder provides reliable quadrature output signals and is suitable for through-hole PCB mounting. Its robust mechanical design ensures long operational life and consistent performance in consumer and industrial electronics. Key Features Incremental (relative) rotary encoder Compact, space-saving design Through-hole mounting configuration Quadrature output (A and B channels) Optional integrated push switch (depending on variant) Detent and non-detent options available High reliability with long rotational life RoHS compliant Electrical Characteristics Supply voltage: Typically 5 VDC (logic-level output) Output type: Digital quadrature (A/B signals) Contact resistance: ≤ 100 mΩ Insulation resistance: ≥ 100 MΩ @ 250 VDC Dielectric strength: 300 VAC for 1 minute Mechanical Characteristics Rotation type: Incremental Number of pulses per revolution (PPR): Typically 6 to 24 (variant dependent) Detent positions: Variant dependent Rotational torque: 10 to 70 gf·cm (typical range) Shaft length: Varies by suffix (e.g., 15 mm typical) Shaft type: Knurled or D-cut (variant dependent) Mounting type: Through-hole PCB Terminal type: PC pins Environmental Specifications Operating temperature range: −30°C to +70°C Storage temperature range: −40°C to +85°C Humidity: Up to 85% RH (non-condensing) Mechanical Life Rotational life: Up to 30,000 cycles (typical) Physical Dimensions Body size: Approximately 12 mm × 11 mm × 5 mm (excluding shaft) Shaft diameter: Typically 6 mm Pin pitch: Standard 2.54 mm Applications Consumer electronics (audio controls, appliances) Industrial control panels Embedded systems and microcontroller interfaces Automotive user interfaces Instrumentation and test equipment #commonpartslibrary #connector #header