An NPN silicon version of the Dallas Arbiter Fuzz Face. Taken from Beavis Audio: http://beavisaudio.com/beavisboard/projects/bbp_FuzzFace_Rev1_1.pdf

For use with conductive sillicon pads

This project a basic development board for MGM240S Transceiver Module, featuring key programming and power nets, and a mix of digital and analog connections. #template #arduino-matter #arduino #siliconlabs #bluetooth #thread #zigbee #matter

BP104

KTY81 series silicon temperature sensors

KTY81 series silicon temperature sensors

Silicon Controlled Rectifier. See https://en.wikipedia.org/wiki/Silicon_controlled_rectifier 3 nodes, 1 internal node 0 = anode, 1 = cathode, 2 = gate 0, 3 = variable resistor 3, 1 = diode 2, 1 = 50 ohm resistor

KTY81 series silicon temperature sensors

KTY81 series silicon temperature sensors

XIAO MG24 Sense is an ultra-low-power wireless development board based on Silicon Labs' EFR32MG24 SoC, featuring a high-performance 78MHz ARM Cortex®-M33 core. It‘s Matter® native over Thread® and Bluetooth® Low Energy 5.3, all supported by the Arduino® Core. With 4MB Flash onboard, 19 GPIOs, LED, and charging circuit onboard, it boasts extremely low operating current and ultra-low-power modes, making it an ideal choice for IoT applications, especially battery-powered projects utilizing Matter® protocols. Additionally, the onboard analog microphone and six-axis IMU sensors make XIAO MG24 Sense a great fit for TinyML applications such as posture detection

Silicon Controlled Rectifier. See https://en.wikipedia.org/wiki/Silicon_controlled_rectifier 3 nodes, 1 internal node 0 = anode, 1 = cathode, 2 = gate 0, 3 = variable resistor 3, 1 = diode 2, 1 = 50 ohm resistor

The IPB017N10N5LF is a high-performance N-channel MOSFET from Infineon's OptiMOS™ 5 Linear FET series, designed specifically for hot-swap and e-fuse applications. This 100 V component, housed in a D2-PAK 7pin package (PG-TO 263-7), features exceptionally low on-resistance (RDS(on)) and a wide safe operating area (SOA), making it ideal for demanding power management tasks. The device is rated for a continuous drain current of up to 180 A (silicon limited) and 314 A (package limited), with a maximum pulsed drain current of 720 A. It supports gate-source voltages ranging from -20 V to 20 V and is 100% avalanche tested, ensuring robust performance under extreme conditions. The IPB017N10N5LF is RoHS compliant, Pb-free, and halogen-free, adhering to environmental standards. Key electrical characteristics include a maximum RDS(on) of 1.7 mΩ at VGS=10 V and a gate threshold voltage range of 2.5 V to 4.1 V. This MOSFET is suitable for applications requiring high efficiency and reliability, supported by its qualification according to JEDEC standards.

This project a basic development board for MGM240S Transceiver Module, featuring key programming and power nets, and a mix of digital and analog connections. #template #arduino-matter #arduino #siliconlabs #bluetooth #thread #zigbee #matter

This project a basic development board for MGM240S Transceiver Module, featuring key programming and power nets, and a mix of digital and analog connections. #template #arduino-matter #arduino #siliconlabs #bluetooth #thread #zigbee #matter

This project focuses on setting up an MGM240S-based circuit for Arduino Matter applications, featuring key programming and power nets, and a mix of digital and analog connections. #template #arduino-matter #arduino #siliconlabs #bluetooth #thread #zigbee

The Vishay Siliconix Si2324DS is a high-performance N-Channel MOSFET designed for applications requiring efficient switching and power management. This component, housed in a compact TO-236 (SOT-23) package, features a drain-source voltage (V_DS) of 100V and a continuous drain current (I_D) of up to 2.3A at 25°C. The Si2324DS offers low on-resistance (R_DS(on)) values of 0.234Ω at a gate-source voltage (V_GS) of 10V, ensuring minimal power loss and high efficiency. With a typical gate charge (Q_g) of 2.9nC, it is suitable for high-speed switching applications. The MOSFET is fully Rg and UIS tested, ensuring reliability and robustness in demanding environments. This component is ideal for use in DC/DC converters, load switches, and LED backlighting in LCD TVs, making it a versatile choice for various power management applications. The Si2324DS is lead-free, halogen-free, and RoHS compliant, aligning with environmental and safety standards.

MikroBUS socket for EFR32xG24 Explorer Kit is a small form factor development and evaluation platform based on the EFR32MG24 System-on-Chip. The EFR32xG24 Explorer Kit is focused on rapid prototyping and concept creation of IoT applications for 2.4 GHz wireless protocols including Bluetooth LE, Bluetooth mesh, Zigbee, Thread, and Matter. #template #arduino-matter #arduino #siliconlabs #bluetooth #thread #zigbee #matter