ESP32-WROOM-32D 24 VAC Industrial Control Board with Protected PSU, Interlocked Relays, 0–10 V Output, Ethernet/Wi‑Fi, and I²C Expansion

Red 631nm LED Indication - Discrete 2V 0603 (1608 Metric) The LTST-C190KRKT is a surface-mount red LED designed for compact electronic applications requiring reliable visual indication. It is housed in a standard chip LED package, making it suitable for automated assembly processes. This device offers high luminous intensity with low power consumption, ideal for status indicators, backlighting, and display applications. Key Features High brightness red LED Compact surface-mount package (0603 / 1608 metric) Low forward voltage and low power consumption Wide viewing angle for uniform illumination Compatible with automated placement equipment RoHS compliant and lead-free Electrical Characteristics (Typical @ 25°C) Forward Voltage (Vf): 2.0 V (typ), 2.4 V (max) Forward Current (If): 20 mA (recommended) Luminous Intensity: ~100–180 mcd Wavelength (Peak): ~631 nm (red) Optical Characteristics Color: Red Viewing Angle: 120° (typ) Absolute Maximum Ratings Forward Current: 30 mA (continuous) Peak Forward Current: 100 mA (pulse) Power Dissipation: ~75 mW Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -40°C to +100°C Mechanical Characteristics Package Type: SMD Chip LED Package Size: 0603 (1.6 mm × 0.8 mm) Mounting Type: Surface Mount Lens Type: Clear Applications Status indicators in electronic devices Backlighting for displays and keypads Consumer electronics Industrial control panels Portable and battery-powered devices #commonpartslibrary #optoelectronic #led #red

The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Board Edge, Cutout; Surface Mount; Through Hole, Right Angle This component is a precision electronic device designed for integration into a wide range of circuit applications. It provides reliable electrical and mechanical performance while maintaining compatibility with standard PCB assembly processes. The device is intended for use in systems requiring stability, durability, and consistent operation across varying environmental conditions. Key Features High reliability and stable operation Compact, industry-standard footprint Compatible with automated assembly processes Lead-free and environmentally compliant Designed for long-term use Applications Consumer electronic devices Industrial control equipment Embedded systems and controllers Power and signal management circuits General-purpose electronic assemblies Electrical Characteristics (Typical – verify with manufacturer datasheet) Voltage rating: To be specified Current rating: To be specified Power rating: To be specified Tolerance or accuracy: To be specified Relevant electrical parameter (resistance, impedance, gain, etc.): To be specified Mechanical Characteristics Package type: To be specified Mounting method: Surface mount or through-hole Dimensions: To be specified Terminal style: To be specified Environmental Specifications Operating temperature range: Typically suitable for standard industrial conditions Storage temperature range: Extended range for safe storage Humidity tolerance: Suitable for non-condensing environments Compliance and Standards Compliant with environmental regulations Compatible with industry manufacturing standards #commonpartslibrary #connector #usb #typec

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi + Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 32-bit processor running up to 240 MHz. This module integrates 16 MB Flash memory and 8 MB PSRAM, making it suitable for memory-intensive applications such as AI, image processing, and advanced IoT systems. It also includes an onboard PCB trace antenna, RF circuitry, crystal oscillator, and power management components—allowing designers to quickly integrate wireless connectivity into compact embedded designs. Key Features Processing & Memory Dual-core Xtensa LX7 CPU, up to 240 MHz 384 KB ROM, 512 KB SRAM + 16 KB RTC SRAM 16 MB Flash (Quad SPI) 8 MB PSRAM (Octal/Quad SPI) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 (LE) + Mesh support Integrated PCB antenna Peripherals & Interfaces Up to 36 GPIOs Interfaces: UART, SPI, I2C, I2S, PWM, ADC, USB OTG Built-in USB Serial/JTAG support Supports touch sensors, timers, watchdogs, CAN (TWAI) Electrical Characteristics Supply voltage: 3.0 V – 3.6 V TX power: up to ~20.5 dBm RX sensitivity: ~-103.5 dBm Operating temp: −40 °C to +65 °C (typical) Advanced Capabilities Optimized for AI acceleration (vector instructions) Suitable for voice recognition, image processing, and edge AI Low-power modes for battery-operated devices| Typical Applications IoT devices and sensor hubs Smart home & home automation AIoT (voice/image recognition) Industrial automation & monitoring Wearables and health devices USB-connected embedded systems #Module #RF-Transceiver #ESP32-S3

PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-2.5mm2 (AWG 26-16) The DG250-3.5-02P-11-00A(H) is a 2-position PCB terminal block connector designed for secure wire-to-board connections. It uses a spring clamp (push-in) mechanism, allowing easy wire insertion and reliable electrical contact without screws. This connector is commonly used in: Power input terminals Signal wiring interfaces Industrial and embedded PCB applications It features a 3.5 mm pitch and a 45° angled entry, making it suitable for compact PCB layouts where space and cable routing are critical. Key Features Electrical Characteristics Rated Voltage: up to 400V Rated Current: up to 5A Mechanical & Connection Number of Pins: 2 (1×2 configuration) Pitch: 3.5 mm Mounting Type: Through-hole (THT) Wire Connection: Spring clamp / push button type No screwdriver required Wire Size: ~22–16 AWG (0.2–1.5 mm²) Physical Design Orientation: 45° angled (easier cable routing) Compact size: suitable for dense PCB layouts Body Material: Polyamide (PA66) Flammability Rating: UL94V-0 (fire-resistant) Contact & Reliability Contact Material: Phosphor bronze Plating: Tin-plated (good conductivity + corrosion resistance) Operating Temperature: −40 °C to +105 °C #commonpartslibrary #connector #terminalblock #tht

ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit Single-Core 64MHz 32KB (32K x 8) FLASH 8-SOIC The STM32G031J6M6 is a compact, low-power 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M0+ core running at up to 64 MHz. It belongs to the STM32G0 series, designed for cost-sensitive and energy-efficient embedded applications. This MCU integrates essential peripherals, memory, and system functions into a small package (8-pin SOIC), making it suitable for consumer electronics, industrial control, appliances, and IoT devices where space and power efficiency are critical. Key Features Core & Performance 32-bit Arm Cortex-M0+ CPU Up to 64 MHz clock frequency Memory Protection Unit (MPU) for improved reliability and security 💾 Memory 32 KB Flash memory (program storage) 8 KB SRAM Flash protection (read/write protection, secure area) Peripherals & Interfaces Communication: I2C (2x) SPI (2x) / I2S USART (2x) + Low-power UART 12-bit ADC (up to ~2.5 MSps, multiple channels) DMA controller (5 channels) Timers: Advanced PWM timer (motor control capable) General-purpose timers (16-bit & 32-bit) Low-power timers Watchdog timers RTC (Real-Time Clock) with VBAT backup Power & Efficiency Operating voltage: 1.7 V to 3.6 V Multiple low-power modes: Sleep, Stop, Standby, Shutdown Optimized for low energy consumption (battery-powered designs) I/O & Package Up to 44 GPIOs (depending on package) 6 GPIOs available in the 8-pin (J6M6) package 5V-tolerant I/O pins (select pins) Compact SOIC-8 package#commonpartslibrary #integratedcircuit #microcontroller

Tactile Switch SPST-NO Top Actuated Through Hole tactile switch 6x6 through hole The B3F-1000 is a compact, through-hole mounted tactile switch designed for momentary input applications. It features a standard 6.0 mm square footprint and is widely used in consumer and industrial electronics for reliable user interface control. Mechanical Characteristics Dimensions (L × W × H): 6.0 mm × 6.0 mm × 3.4 mm Actuator Type: Round Actuator Height: 4.3 mm Mounting Style: Through Hole Mounting Direction: Straight Termination Style: Solder Pin Color: White Electrical Characteristics Switch Function: SPST, Momentary (OFF-(ON)) Contact Rating: 50 mA @ 24 VDC Operating Force: 1 N (~100 gf) Contact Resistance: ≤100 mΩ (typical, refer to datasheet) Insulation Resistance: ≥100 MΩ (typical, refer to datasheet) Environmental Characteristics Operating Temperature Range: -25°C to +70°C RoHS Compliance: Yes Reliability Operating Life: 1,000,000 cycles Packaging Information Factory Pack Quantity: 1500 pcs Unit Weight: 0.008818 oz (~0.25 g) Additional Information Country of Origin: Japan (JP) Illumination: Non-illuminated Ground Terminal: No #commonpartslibrary #switch #tactile #spst

Connector Header Through Hole 6 position 0.100" (2.54mm) The 640456-6 is a 6-position, single-row wire-to-board header connector from TE Connectivity (AMP series), designed for reliable power and signal connections in a wide range of electronic applications. It features a 2.54 mm pitch and through-hole mounting for strong mechanical retention and ease of assembly. The connector is commonly used with matching crimp housings and terminals, providing a secure and serviceable interconnect solution for PCB-based systems. Key Features 6-position (1x6) header connector 2.54 mm pitch spacing Through-hole mounting (THT) Vertical (top-entry) orientation Friction-lock compatible with mating housings Tin-plated contacts for good conductivity and corrosion resistance Durable thermoplastic housing Mechanical Characteristics Mounting Type: Through Hole Orientation: Vertical (Top Entry) Pitch: 2.54 mm Number of Positions: 6 Row Configuration: Single row Mating Type: Friction fit with compatible housing Termination Type: Solder tails Electrical Characteristics Rated Current: Up to 3 A per contact (depending on wire gauge) Rated Voltage: 250 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Withstanding Voltage: 1,000 VAC Material Specifications Housing: Thermoplastic, UL94V-0 rated Contacts: Copper alloy Contact Plating: Tin over nickel Environmental Specifications Operating Temperature Range: -40°C to +105°C Storage Temperature: -40°C to +105°C Packaging Information Packaging Type: Bulk or tray (varies by supplier) RoHS Compliant: Yes Lead-Free: Yes Compatible Components Mating Housing: TE Connectivity compatible crimp housings (e.g., AMP series) Crimp Terminals: соответствующие crimp contacts for 2.54 mm systems Typical Applications PCB interconnects Consumer electronics Industrial control systems Power and signal distribution Prototyping and development boards #CommonPartsLibrary #Connector #Header #Male-pins #MTA-100

Slide Switch SPST 4A 125V Throuh Hole The L101011MS02Q is a single-pole, single-throw (SPST) miniature toggle switch designed for low-power switching applications. It features a compact panel-mount design with a durable actuator and reliable contact mechanism, making it suitable for control and signal switching in industrial, instrumentation, and consumer electronics. The switch provides a maintained (latching) ON-OFF function and is built for long mechanical and electrical life. Key Features SPST (Single Pole, Single Throw) configuration ON-OFF maintained switching function Miniature toggle actuator Panel mount design with threaded bushing Solder lug terminals for secure wiring High mechanical durability Compact form factor Mechanical Characteristics Mounting Type: Panel mount Actuator Type: Toggle lever Bushing Type: Threaded, with nut and washer Terminal Type: Solder lug Number of Poles: 1 Number of Throws: 1 Switching Function: ON-OFF (latching) Electrical Characteristics Rated Voltage: 125 VAC / 28 VDC Rated Current: 3 A @ 125 VAC, 6 A @ 28 VDC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Strength: 1,000 VAC for 1 minute Material Specifications Housing: Thermoplastic or phenolic (manufacturer dependent) Actuator: Metal (nickel-plated brass) Contacts: Copper alloy with silver plating Terminals: Brass, tin-plated Environmental Specifications Operating Temperature Range: -30°C to +85°C Storage Temperature: -40°C to +85°C Mechanical Life Mechanical Life: ≥ 40,000 cycles Electrical Life: ≥ 10,000 cycles (at rated load) Typical Applications Control panels Power switching for small devices Instrumentation equipment Audio equipment Industrial and consumer electronics #commonpartslibrary #rocker #switch #spst

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin The component is a two-position pluggable terminal block header designed for secure and reliable wire-to-board connections in industrial and embedded electronic systems. It is part of the COMBICON MSTB family, widely used for field wiring applications such as CAN bus, RS485, and power distribution. The device provides a robust interface between PCB circuitry and external wiring, supporting easy installation, maintenance, and replacement through a pluggable connection system. Mechanical Characteristics Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole PCB mount Orientation: Vertical (straight) Termination Style: Pin header for mating plug connector Housing Material: Polyamide (PA), high-temperature resistant Color: Green Electrical Characteristics Rated Voltage: Up to 250 V Rated Current: Up to 12 A Contact Material: Copper alloy Contact Plating: Tin plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 Mating and Compatibility Compatible Plug Series: Phoenix Contact MSTB 2,5 series (e.g., 1757019) Connection Method (Plug Side): Screw clamp termination Wire Size Range: Typically accepts 24 AWG to 12 AWG (depending on mating plug) Standards and Compliance RoHS: Compliant UL Recognized: Yes IEC Compliance: Yes Application Notes The component is commonly used in industrial communication systems such as CAN bus networks where a reliable and removable connection is required for CANH and CANL signals. Its 5.08 mm pitch ensures adequate spacing for signal integrity and ease of wiring, while the pluggable design simplifies field servicing and module replacement. #connector #tht #terminalblock

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Board Edge, Cutout; Surface Mount; Through Hole, Right Angle The USB4520-03-0-A from Global Connector Technology (GCT) is a mid-mount USB Type-C connector that supports USB 2.0 signaling. It is engineered for space-saving PCB layouts, combining both surface-mount and through-hole (hybrid) mounting for improved mechanical strength and reliability. It features a right-angle, board-edge design, making it suitable for devices where the USB-C port needs to be accessible from the edge of the enclosure. Electrical & Interface USB Type-C receptacle (female) Supports USB 2.0 data transfer 24 total positions (16 active + 8 dummy pins) for mechanical compatibility Reversible plug orientation (standard USB-C feature) Mechanical Design Mid-mount (mid-plane) design → partially recessed into PCB for lower profile Right-angle orientation for edge-mounted applications Hybrid mounting: Surface-mount signal pins Through-hole shell tabs for mechanical reinforcement Designed for board-edge cutout integration Form Factor & Durability Compact footprint for space-constrained designs Robust retention due to through-hole anchor tabs Typically rated for thousands of mating cycles (standard for USB-C connectors) Application Use Cases Embedded systems (e.g., ESP32-based boards) Consumer electronics (chargers, hubs, IoT devices) Industrial control interfaces Portable devices requiring USB-C power/data Design Notes (Important for PCB Layout) Requires PCB cutout for mid-mount placement Pay attention to: Keepout zones under the connector Differential pair routing (D+ / D−) for USB 2.0 Ensure proper mechanical anchoring to avoid stress on SMT pads #commonpartslibrary #connector #usb #typec

Bipolar (BJT) Transistor NPN 40V 200 mA 300MHz 625 mW Through Hole TO-92-3 The 2N3904TFR is a general-purpose NPN bipolar junction transistor (BJT) designed for low-power amplification and switching applications. It is widely used in signal processing, small-signal amplification, and digital switching circuits. This transistor offers fast switching speed, low saturation voltage, and reliable performance in a compact surface-mount package, making it suitable for consumer electronics, industrial controls, and embedded systems. Manufacturer Various (commonly ON Semiconductor / onsemi, Diodes Inc., Central Semiconductor) Part Number 2N3904TFR Transistor Type NPN Bipolar Junction Transistor (BJT) Configuration Single Package / Case SOT-23 (TO-236AB) Mounting Style Surface Mount (SMD/SMT) Collector-Emitter Voltage (VCEO) 40 V Collector-Base Voltage (VCBO) 60 V Emitter-Base Voltage (VEBO) 6 V Collector Current (IC) 200 mA (max) Power Dissipation (PD) ~200 mW to 350 mW (package dependent) DC Current Gain (hFE) 100 to 300 (typical, varies with operating conditions) Transition Frequency (fT) ~300 MHz Collector-Emitter Saturation Voltage (VCE(sat)) ~0.2 V (typical at IC = 10 mA, IB = 1 mA) Operating Temperature Range -55°C to +150°C Polarity NPN Packaging Tape & Reel (TFR suffix) RoHS Compliance Compliant #commonpartslibrary #transistor #bjt

PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 14KB (8K x 14) FLASH 40-PDIP The PIC16F877A-I/P is a high-performance 8-bit microcontroller from Microchip Technology, based on a Harvard architecture with separate program and data memory buses. It is designed for a wide range of embedded applications requiring reliable processing, multiple communication interfaces, and analog capability. The device integrates Flash program memory, EEPROM data storage, and numerous peripherals including ADC, timers, serial communication modules, and PWM functions. Packaged in a 40-pin PDIP form factor, it is widely used in industrial automation, consumer electronics, and educational development systems. Core Features 8-bit PIC microcontroller architecture Harvard architecture with RISC instruction set Operating frequency up to 20 MHz Single-cycle instruction execution (except branches) Memory Program Memory: 8K words (Flash) Data Memory (RAM): 368 bytes EEPROM Data Memory: 256 bytes I/O Features Up to 33 programmable I/O pins Multiple input/output ports (PORTA, PORTB, PORTC, PORTD, PORTE) High current sink/source capability on selected pins Analog Features 10-bit Analog-to-Digital Converter (ADC) Up to 8 analog input channels Programmable voltage reference Timers and Control Three timers (Timer0, Timer1, Timer2) Capture/Compare/PWM (CCP) modules Watchdog Timer (WDT) Power-on Reset (POR) and Brown-out Reset (BOR) Communication Interfaces USART (Universal Synchronous/Asynchronous Receiver/Transmitter) SPI (Serial Peripheral Interface) I²C (Inter-Integrated Circuit) via MSSP module Electrical Characteristics Operating Voltage: 4.0V to 5.5V Operating Temperature Range: -40°C to +85°C (Industrial grade) Low power consumption modes available Package Information Package Type: PDIP (Plastic Dual Inline Package) Pin Count: 40 pins Mounting Type: Through-hole Applications Industrial control systems Embedded automation Consumer electronics Sensor interfacing and data acquisition Educational and prototyping platforms #commonpartslibrary #integratedcircuit #microcontroller

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

JST PH Connector Header Through Hole, Right Angle 4 position 0.079" (2.00mm) The S4B-PH-K-S(LF)(SN) is a 4-position, single-row, right-angle (side-entry) male header designed for 2.0 mm pitch wire-to-board connections. It is a through-hole mounted, shrouded connector that ensures reliable and secure mating with compatible PH series housings and crimp terminals. This connector is commonly used in consumer electronics, embedded systems, power supplies, and industrial control boards, especially where space-saving and dependable connections are required. Key Features Connector Type: Shrouded male header (wire-to-board) Number of Positions: 4 pins (single row) Pitch: 2.0 mm Orientation: Right-angle (side entry) Mounting Type: Through-hole (THT) Termination: Solder Electrical Characteristics Rated Voltage: 100 V Rated Current: 2 A per contact Insulation Resistance: ≥1000 MΩ Contact Resistance: Low (typically ≤10–20 mΩ) Mechanical & Material Contact Material: Brass / phosphor bronze with tin plating Housing Material: PA66 (Nylon), UL94 V-0 flame rated Locking Mechanism: Detent lock for secure mating Shrouded Design: Prevents misalignment and protects pins Environmental Operating Temperature: −25 °C to +85 °C #CommonPartsLibrary #Connector #Header #JSTPH #MalePins #RightAngle #4pos

Fuse Holder 32V 1 Circuit Blade Through Hole The 178.6764.0001 is an automotive blade fuse holder from Littelfuse, part of the MINI® FL1 series, designed for direct PCB mounting (through-hole). It allows easy integration of a single MINI blade fuse into a printed circuit board for overcurrent protection. This component is commonly used in automotive electronics, industrial control systems, and embedded power circuits, where compact and reliable fuse protection is required. Key Features Fuse Type Compatibility Supports MINI® automotive blade fuses (ATM/APM type) PCB Mount (Through-Hole) Designed for direct soldering to PCB for strong mechanical support Current Capability Up to 30 A maximum ~22 A continuous rating Voltage Rating Up to 58 VDC (automotive systems) Single Fuse Position Holds 1 fuse per holder Thermoplastic Housing Heat-resistant black body UL94 V-0 flammability rating for safety Contact Material Tin-plated copper alloy terminals for reliable conductivity Standard PCB Pitch Approx. 7.62 mm pin spacing Modular Design Multiple holders can be mounted side-by-side for multi-channel protection blade fuse holder automotive PCB #Circuit-Protection #Fuseholders #FL1

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C3-WROOM-02-N4 is a compact, general-purpose Wi-Fi and Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-C3 SoC and integrates RF components, crystal oscillator, flash memory, and PCB antenna in a single module. It is designed for a wide range of applications such as IoT devices, smart home systems, industrial automation, and consumer electronics, offering a balance of performance, low power consumption, and cost efficiency. Key Features MCU & Memory 32-bit RISC-V single-core processor up to 160 MHz 384 KB ROM 400 KB SRAM + 8 KB RTC SRAM Integrated 4 MB SPI flash (N4 variant) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Supports Station, SoftAP, and Station + SoftAP modes Bluetooth 5 (BLE) with mesh support Data rates up to 150 Mbps (Wi-Fi) Peripherals & Interfaces Up to 15 GPIOs Interfaces: SPI, UART, I2C, I2S LED PWM ADC (SAR) Timers & watchdog USB Serial/JTAG support TWAI® (CAN 2.0 compatible) #commonpartslibrary #transceiver #module #wireless #rf

Board Mount Humidity Sensors Intermediate Humidity and Temperature Sensor Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R2 is a fully calibrated, low-power environmental sensor that measures relative humidity (RH) and temperature. It integrates sensing elements, signal processing, and a digital interface into a small surface-mount package, making it ideal for space-constrained designs. Key Features Sensor Type: Digital humidity and temperature sensor Interface: I²C (easy MCU integration) Supply Voltage: ~1.08 V to 3.6 V Humidity Accuracy: up to ±1.8% RH (typical) Temperature Accuracy: up to ±0.2 °C (typical) Response Time: Fast measurement and low latency Power Consumption: Ultra-low, suitable for battery devices Package: DFN (compact, ~1.5 × 1.5 mm) Factory Calibration: No external calibration required Functional Overview The sensor uses capacitive humidity sensing combined with a bandgap temperature sensor. Internal electronics convert these measurements into digital data via I²C, eliminating the need for external ADCs or complex signal conditioning. Design Advantages Small footprint for compact PCBs Low power consumption for IoT and portable devices High reliability with long-term stability Fast response time for real-time monitoring Simple integration with microcontrollers Typical Applications IoT and smart home devices HVAC and climate control systems Wearables and portable electronics Industrial monitoring systems Environmental data logging #CommonPartsLibrary #Sensors,-Transducer #Humidity #Moisture-Sensor #SHT4x

Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator