IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Super tiny double-sided xiao board with expansion connector.

R2 w Thread changes: -Moving to Letter Modules for ease of design -Adding MGM210L for Matter on Thread On/Off and intensity control -Shifted A and R letters closer to fix Kerning -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template #arduino-matter

R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Replaces the Roland OP-760-1 using a Tang Nano 20k FPGA

Replaces the Roland OP-760-1 using a Tang Nano 20k FPGA

An Expansion board for Arduino Nano and compatible boards. It hosts an L293D Motor driver IC to control 2 DC motors independently. Has provision to add HC-05 / HC-06 Bluetooth Module. All free GPIO pins are easily accessible. Operates on 7.4 - 12V Battery.

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.

GL5528 Light Sensor Grove Platform Evaluation Expansion Board

VikingBoard: Multi-Wireless Expansion Board with WT32-SC01 Wi-Fi/BT, LoRa CC1101, NRF24L01+, GPS, Haptic Drivers, and Multi-Rail Power Management (+3V3_IO, +3V3_RF, +3V3_KBD, +5V_SYS, GND) #multi-wireless #expansion #power-management

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.

SSM2167-1RMZ-R7 Microphone Audio mikroBUS™ Click™ Platform Evaluation Expansion Board #EvaluationBoard #SSM2167-1RMZ-R7 #project #template

SSM2167-1RMZ-R7 Microphone Audio mikroBUS™ Click™ Platform Evaluation Expansion Board #EvaluationBoard #SSM2167-1RMZ-R7 #project #template

Low-voltage ESP32-S3-DevKitC-1 carrier and control board for ATLAS X, with OLED, buttons, DS18B20 input, indicators, expansion, and no fan circuitry in Revision A.

12 V Bluetooth controller board for 24 LED letter outputs using an ESP32, I/O expansion, and low-side output drivers. Draft specification captured from an uploaded reference schematic image; exact schematic recreation needs confirmation of unreadable details.

Portable ESP32-S3 AI voice assistant development board with USB-C programming, LiPo charging, OLED, I2S microphone/amplifier, SPI flash, and microSD expansion.

Professional 4-layer STM32H743ZIT6 learning/development board with USB-C power, USB FS, SWD, crystals, SPI flash, ESP-12F Wi-Fi, full GPIO breakout, and expansion headers.

Production-intent Raspberry Pi Compute Module 5 carrier board for SitePulse, integrating rugged wide-input power, CAN bus, protected relay/engine-control outputs, I2C expansion, Predator engine data sniffer interface, debug/status I/O, and field-ready connectors for job-site/off-grid use.

ESP32-S3 touch display development board standardized on a portrait ILI9341 TFT by default, preserving USB-C power, CP2102N USB-UART, I2C touch, PCM5102A audio, microSD, and expansion while assigning KEY1-KEY5 to BOOT, RESET, USER1, USER2, and USER3. The next design pass is driven by a portrait-oriented board resize and user-facing edge placement of the display area, touch interface, controls, and primary connector access.

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template