Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A SOT-23-6 Thin, TSOT-23-6 The AP63200/AP63201/AP63203/AP63205 is a 2A, synchronous buck converter with a wide input voltage range of 3.8V to 32V and fully integrates a 125mΩ high-side power MOSFET and a 68mΩ low-side power MOSFET to provide high-efficiency step-down DC/DC conversion. The AP63200/AP63201/AP63203/AP63205 device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated compensation network. The AP63200/AP63201/AP63203/AP63205 has optimized designs for Electromagnetic Interference (EMI) reduction. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. It also has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which further erases highfrequency radiated EMI noise caused by MOSFET switching. The device is available in a low-profile, TSOT26 package. • VIN 3.8V to 32V • 2A Continuous Output Current • 0.8V ±1% Reference Voltage • 22µA Ultralow Quiescent Current • Switching Frequency o 500kHz: AP63200 and AP63201 o 1.1MHz: AP63203 and AP63205 • Pulse Width Modulation (PWM) Regardless of Output Load o AP63201 • Supports Pulse Frequency Modulation (PFM) o AP63200, AP63203, and AP63205 o Up to 80% Efficiency at 1mA Light Load o Up to 88% Efficiency at 5mA Light Load • Fixed Output Voltage o 3.3V: AP63203 o 5.0V: AP63205 • Proprietary Gate Driver Design for Best EMI Reduction • Frequency Spread Spectrum (FSS) to Reduce EMI • Precision Enable Threshold to Adjust UVLO • Protection Circuitry o Overvoltage Protection o Cycle-by-Cycle Peak Current Limit o Thermal Shutdown • 12V and 24V distributed power bus supplies • Flat screen TV sets and monitors • Power tools and laser printers • White goods and small home appliances • FPGA, DSP, and ASIC supplies • Home audios • Network systems • Set top boxes • Gaming consoles • Consumer electronics #commonpartslibrary #integratedcircuit #AP63203WU7 #BuckConverter #DCDCConverter #PowerManagement #VoltageRegulator #SynchronousBuck #EmbeddedSystems #IndustrialElectronics #PowerSupply #DiodesInc #3V3Power #ElectronicsDesign

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule

4 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole 691137710004 is a 4-position wire-to-board terminal block from the WR-TBL Series 1377 by Würth Elektronik. It features a horizontal side-entry design with a 5.00 mm pitch and through-hole PCB mounting, making it suitable for industrial controls, power distribution, automation equipment, and general-purpose PCB wire connections. The pressure-clamp screw terminal design provides secure wire retention and reliable electrical performance. Key Features 4-position wire-to-board terminal block 5.00 mm pitch spacing Horizontal (side-entry) wire connection Through-hole PCB mounting Pressure-clamp screw termination with wire guard Supports 12–30 AWG wire sizes Rated for up to 16 A current Rated for up to 300 V Operating temperature range: -30°C to +120°C Polycarbonate (PC) housing for durability Copper alloy contacts with nickel plating M2.5 screw thread with 0.4 Nm recommended tightening torque Green housing color for standard industrial identification #TerminalBlock #WireToBoard #WurthElektronik #PCBConnector #ScrewTerminal #IndustrialConnector #ThroughHole #WRTBL #PowerConnection #ElectronicsDesign #commonpartslibrary #connector #terminalblock

Polymeric PTC Resettable Fuse 6V 2 A Ih Surface Mount 1206 (3216 Metric), Concave NANOSMDC200F-2 – Surface-mount polymeric PPTC resettable fuse with a 2 A hold current rating. Designed for overcurrent protection in electronic circuits, it safely interrupts excessive current and automatically resets once normal conditions resume. Ideal for USB ports, battery-powered devices, embedded systems, and general consumer electronics, providing reliable, compact, and maintenance-free protection. #PPTCFuse #SMDProtection #ResettableFuse #OvercurrentProtection #2AHold #CircuitSafety #ElectronicsDesign

13V Clamp 2.5A (8/20µs) Ipp Tvs Diode Surface Mount 5-TSSOP The PESD5V0L4UG,115 is a low-capacitance, unidirectional quad-channel Electrostatic Discharge (ESD) protection diode array from Nexperia. It is designed to protect up to four high-speed signal or data lines from ESD events and other transient voltage spikes while maintaining excellent signal integrity due to its low junction capacitance. Packaged in a compact SOT-353 (SC-88A/5-TSSOP) surface-mount package, it is well suited for space-constrained electronic designs, including communication equipment, portable devices, computers, and consumer electronics. Key Features Quad-channel unidirectional ESD protection for up to 4 signal lines 5 V reverse standoff voltage (VRWM) suitable for 5 V interfaces Low junction capacitance (~16 pF typ.) to minimize signal distortion Low clamping voltage (13 V max.) for effective transient suppression Peak pulse power of 30 W IEC 61000-4-2 Level 4 ESD protection (up to ±20 kV) Ultra-low leakage current (typically 5 nA) Compact SOT-353 (SC-88A) surface-mount package Qualified to AEC-Q100 for automotive applications Ideal for protecting USB, communication interfaces, SIM card lines, audio/video ports, and other sensitive I/O circuits. #PESD5V0L4UG115 #Nexperia #ESDProtection #TVSDiode #TransientProtection #CircuitProtection #QuadChannel #LowCapacitance #AutomotiveGrade #SOT353 #SignalIntegrity #ElectronicsDesign

ARM® Cortex®-M4F STM32G4 Microcontroller IC 32-Bit 170MHz 512KB (512K x 8) FLASH 64-LQFP (10x10) The STM32G491RET6 from STMicroelectronics is a high-performance 32-bit microcontroller based on the Arm® Cortex®-M4 core with Floating Point Unit (FPU), designed for advanced embedded applications requiring high computational performance, precise analog processing, and real-time control. It belongs to the STM32G4 series and integrates enhanced analog peripherals, motor-control timers, communication interfaces, security features, and hardware accelerators such as CORDIC and FMAC. The device operates at up to 170 MHz, provides 512 KB Flash memory, and includes 96 KB SRAM, making it suitable for applications such as motor control, digital power conversion, industrial automation, robotics, and embedded control systems. Key Features Core: Arm® Cortex®-M4 32-bit CPU with FPU, DSP instructions, and MPU Maximum CPU Frequency: Up to 170 MHz (up to 213 DMIPS) Memory: 512 KB Flash memory with ECC support 96 KB SRAM with parity checking features Quad-SPI memory interface Operating Voltage: 1.71 V to 3.6 V Package: LQFP-64 Advanced Analog Features: 3 × 12-bit ADCs with high-speed conversion 4 × 12-bit DAC channels 4 × Rail-to-Rail operational amplifiers 4 × Fast analog comparators Internal voltage reference buffer Hardware Accelerators: CORDIC accelerator for trigonometric calculations FMAC (Filter Math Accelerator) for digital filtering applications Timers & Motor Control: Advanced PWM timers for motor-control applications Multiple 16-bit and 32-bit timers Support for encoder and PWM control Communication Interfaces: 2 × FDCAN interfaces 5 × USART/UART 3 × SPI interfaces 3 × I²C interfaces USB 2.0 Full-Speed interface SAI audio interface Security Features: True Random Number Generator (TRNG) CRC calculation unit Unique device ID Debug & Programming: SWD and JTAG debugging support Typical Applications Motor control and BLDC controllers Digital power converters Industrial automation equipment Robotics and motion control Smart sensors and embedded control systems Power management applications #STM32G491RET6 #STM32G4 #STMicroelectronics #ARM_CortexM4 #Microcontroller #MCU #EmbeddedSystems #MotorControl #DigitalPower #IndustrialAutomation #Robotics #IoT #ElectronicsDesign #PCBDesign

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

2 Position Wire to Board Terminal Block Horizontal with Board 0.375" (9.53mm) Through Hole # 1714971 ## General Description The 1714971 is a high-current printed circuit board terminal block manufactured by Phoenix Contact and designed for secure power and signal connections in industrial and commercial electronic equipment. The component utilizes a screw-clamp termination mechanism that provides reliable wire retention, low contact resistance, and long-term electrical stability. Its robust construction and through-hole mounting design make it suitable for applications requiring dependable field wiring, high-current handling capability, and resistance to mechanical stress. The terminal block is commonly used in power supplies, industrial automation systems, motor controllers, battery management systems, energy distribution equipment, instrumentation, and other applications requiring secure PCB-mounted power connections. ## Key Features ### Mechanical Characteristics * Through-hole PCB mounting * Screw-clamp wire termination * Side-entry wire connection * High-strength housing construction * Secure field-wire installation * Designed for repeated maintenance and servicing operations ### Electrical Characteristics * High-current carrying capability * Low contact resistance * Reliable electrical conductivity * Stable performance under demanding operating conditions * Suitable for power distribution and control applications ### Contact System * Corrosion-resistant conductive contacts * Screw-actuated clamping mechanism * Secure conductor retention * Reliable electrical connection during vibration and mechanical stress ### Material Construction * Industrial-grade thermoplastic housing * High-conductivity metal contacts * Flame-resistant insulation materials * RoHS-compliant construction ### Environmental Characteristics * Suitable for industrial environments * Resistant to mechanical wear * Durable under continuous operation * Designed for long service life ### Application Areas * Industrial Automation Equipment * Power Supply Systems * Motor Control Circuits * Battery Management Systems * Renewable Energy Equipment * Electrical Distribution Panels * Instrumentation Systems * Process Control Equipment * Embedded Power Electronics * Industrial Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade PCB Interconnect Solution ## Manufacturer Phoenix Contact ## Product Family COMBICON PCB Terminal Blocks #PhoenixContact #1714971 #COMBICON #TerminalBlock #PCBTerminalBlock #ScrewTerminal #PowerConnector #IndustrialElectronics #PowerDistribution #IndustrialAutomation #EmbeddedSystems #ControlSystems #ElectronicsDesign #PCBAssembly #ElectricalEngineering

Battery Multi-Function Controller IC Lithium Ion/Polymer 32-VFQFPN (5x5) L9961 is part of a complete battery pack monitoring, balancing, and protecting system for Li-Ion and Li-Polymer cells in 3, 4 or 5 series configurations. The L9961 uses a high precision ADC to provide cell voltage, stack voltage and temperature conversion via external NTC. Voltage monitoring functions are cyclically performed with a programmable loop time. Stack current is also monitored via a high accuracy CSA, continuously running and performing also Coulomb counting. Cell balancing is available and can be simultaneously activated on all cells. IC configuration and information exchange for SOC/SOH estimation are performed via I2C peripheral. The IC also integrates a dual pre-driver programmable in both HS/LS configurations for driving pack relays. L9961 also implements battery pack fuse protection to prevent fire and explosion hazards. A 3.3 V regulator with a high current capability is available for supplying pack controller and other external circuitry in both standby and normal operation modes. The IC protects the battery pack against over/under voltage conditions and monitors for over/ under temperature. It also features protection against overcurrent (both directions) and short-circuit in discharge events. Safety-relevant configurations can be stored in the internal NVM to avoid re-programming the device at each wake-up. Features • 2 μA shipment - DEEP SLEEP mode current and 5 μA standby consumption (with VREG LDO active) standby consumption (with VREG LDO active) • Integrated 3.3 V VREG LDO for supplying MCU and LEDs • Measures cell voltage (3 to 5 cells), with over/undervoltage detection and balance undervoltage protection • 12-bit voltage measurement with maximum error of ±15 mV in the [1.5 – 4.5] V range, for -40 °C < TJ < 105 °C • Measures stack voltage, with over/under voltage detection and plausibility check vs. sum of cells • Measures pack temperature via NTC, with over/undertemperature detection • Ratiometric temperature measurement with ±0.8% max. gain error in the [0.2 – VREG] V range, for -40 °C < TJ < 105 °C • Measures battery current, with Coulomb counting, overcurrent (both directions) and short-circuit in discharge protection. • 16-bit signed current measurement with 0.1% full scale error at room temperature • I 2C peripheral for device programming and data transfers over I2C bus • Cell balancing supporting up to 70 mA per cell • Dual configurable HS/LS predriver for pack relay management • Pack fuse management • Embedded NVM for configuration parameters storage • High hotplug robustness Applications • Cordless power tools • Backup energy storage systems and UPS • Light electric vehicles (e-bikes, scooters, etc.) • Portable and semi-portable equipment • Medical equipment #L9961TR #BatteryManagement #BMS #LiIonBattery #LiPoBattery #STMicroelectronics #BatteryProtection #CellBalancing #CoulombCounting #PowerManagement #EmbeddedSystems #EnergyStorage #EBike #PowerTools #ElectronicsDesign