2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin The component is a two-position pluggable terminal block header designed for secure and reliable wire-to-board connections in industrial and embedded electronic systems. It is part of the COMBICON MSTB family, widely used for field wiring applications such as CAN bus, RS485, and power distribution. The device provides a robust interface between PCB circuitry and external wiring, supporting easy installation, maintenance, and replacement through a pluggable connection system. Mechanical Characteristics Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole PCB mount Orientation: Vertical (straight) Termination Style: Pin header for mating plug connector Housing Material: Polyamide (PA), high-temperature resistant Color: Green Electrical Characteristics Rated Voltage: Up to 250 V Rated Current: Up to 12 A Contact Material: Copper alloy Contact Plating: Tin plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 Mating and Compatibility Compatible Plug Series: Phoenix Contact MSTB 2,5 series (e.g., 1757019) Connection Method (Plug Side): Screw clamp termination Wire Size Range: Typically accepts 24 AWG to 12 AWG (depending on mating plug) Standards and Compliance RoHS: Compliant UL Recognized: Yes IEC Compliance: Yes Application Notes The component is commonly used in industrial communication systems such as CAN bus networks where a reliable and removable connection is required for CANH and CANL signals. Its 5.08 mm pitch ensures adequate spacing for signal integrity and ease of wiring, while the pluggable design simplifies field servicing and module replacement. #connector #tht #terminalblock

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole screw terminal 2 pin 3.5mm This component is a printed circuit board mounted screw terminal block designed to provide a secure and serviceable wire-to-board connection. It accommodates two conductors and uses a screw clamp mechanism to ensure reliable electrical and mechanical contact. The compact 3.5 mm pitch makes it suitable for space-constrained designs while maintaining adequate creepage and clearance distances for low-voltage applications. The terminal is intended for through-hole mounting and supports field wiring without the need for specialized tools, making it appropriate for industrial control systems, power distribution modules, and general-purpose electronic assemblies. Mechanical Characteristics: The terminal block is constructed with a high-temperature thermoplastic housing that provides mechanical strength and electrical insulation. The housing is typically green in color and designed for side-entry wire insertion. The clamping system uses metal screws and pressure plates to secure stripped wire ends. The component is designed for through-hole PCB mounting with soldered pins providing structural stability. The form factor supports modular placement along the PCB edge for accessible wiring. Electrical Characteristics: The device is designed for low to moderate voltage and current applications typical of signal and power connections in control electronics. Conductive elements are made from metal alloys with appropriate plating to ensure good conductivity and resistance to corrosion. The screw clamp connection provides stable contact resistance under vibration and thermal cycling conditions. Material and Environmental Characteristics: The insulating body is made from flame-retardant thermoplastic material compliant with relevant safety standards. The component is suitable for standard operating temperature ranges encountered in industrial and commercial electronics. Materials are selected to meet common environmental and regulatory requirements such as RoHS compliance. Application Considerations: This terminal block is intended for applications requiring reliable field wiring connections, ease of maintenance, and secure termination. It is commonly used in power supplies, control panels, interface modules, and embedded systems. Proper PCB footprint design and adherence to recommended soldering practices are required to ensure optimal performance and reliability. #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 1377

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block

Fuse Holder 80V 1 Circuit Blade Through Hole General Description The 178.7017.0001 is a PCB-mounted fuse holder designed for cartridge fuses, typically used in power input protection circuits. It provides a secure and reliable method for mounting and replacing fuses in electronic assemblies. This component is commonly used in industrial equipment, power supplies, and consumer electronics where overcurrent protection is required. Key Features Designed for standard cartridge fuses (commonly 5x20 mm format) Through-hole PCB mounting for secure mechanical stability Reliable electrical contact with low resistance Easy fuse replacement and maintenance High-temperature resistant housing material Suitable for mains and low-voltage applications Mechanical Characteristics Mounting Type: Through-Hole (THT) Fuse Size Compatibility: 5 mm x 20 mm Orientation: Vertical PCB mount Housing Material: Thermoplastic (UL94 V-0 rated) Pin Configuration: 2-pin Electrical Characteristics Rated Current: Up to 10 A (depending on fuse used) Rated Voltage: Up to 250 VAC Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) Storage Temperature Range: -40°C to +85°C Flame Rating: UL94 V-0 compliant Applications Power supply units Industrial control systems Consumer electronics Battery chargers AC mains protection circuits Compliance & Standards RoHS compliant UL recognized materials (depending on manufacturer variant) Notes Ensure compatibility with selected fuse rating and type Observe proper PCB layout spacing for high-voltage applications Follow safety standards when used in mains-powered circuits #commonpartslibrary #circuitprotection #fuseholder

20 Hz ~ 20 kHz Analog Microphone Electret Condenser 3 V ~ 10 V Omnidirectional (-44dB ±2dB) PC Pins JLI 140A HD microphone microphone capsule The CMA-4544PF-W is an electret condenser microphone designed for compact audio capture applications. It features high sensitivity, low noise characteristics, and stable frequency response, making it suitable for voice recording, communication devices, and embedded audio systems. The device integrates a permanently charged electret diaphragm with a built-in FET preamplifier, enabling reliable signal output with minimal external circuitry. Key Features Electret condenser microphone element High sensitivity and signal-to-noise ratio Omnidirectional pickup pattern Compact, low-profile package Built-in FET impedance converter Stable performance over temperature range RoHS compliant Electrical Characteristics Operating Voltage: typically 2.0 V (range: 1.5 V to 10 V) Current Consumption: typically 0.5 mA Sensitivity: typically -44 dB ±3 dB (at 1 kHz, 0 dB = 1 V/Pa) Signal-to-Noise Ratio: typically 60 dB Output Impedance: typically 2.2 kΩ Frequency Response: 20 Hz to 16 kHz Acoustic Characteristics Directivity: Omnidirectional Maximum Sound Pressure Level: typically 110 dB SPL Equivalent Noise Level: typically 34 dB SPL Mechanical Characteristics Package Type: Through-hole cylindrical metal can Dimensions: approximately 4.5 mm diameter × 4.4 mm height Mounting Type: PCB through-hole Terminal Configuration: Two-pin (signal and ground) Environmental Specifications Operating Temperature Range: -20°C to +70°C Storage Temperature Range: -40°C to +85°C Applications Voice recording devices Mobile and handheld electronics Intercom and communication systems Embedded audio input modules IoT and consumer electronics Pin Configuration Pin 1: Output (Vout) Pin 2: Ground (GND / Case) Compliance RoHS compliant Suitable for general consumer electronics use #commonpartslibrary #audio #microphone #analog #condenser

Connector Header Panel Mount, Through Hole 12 position 0.230" (5.84mm) The 0194280015 is a wire-to-board rectangular header connector from Molex, part of the MX150L series. It is designed for high-reliability power and signal connections, particularly in automotive and industrial environments. This connector is a 12-position, dual-row, vertical (straight) male header that mounts through the PCB and mates with corresponding cable connectors. It features a sealed design (IP67 rated), making it suitable for harsh conditions such as dust, moisture, and vibration. Key Features Connector Type Wire-to-board male header (vertical / straight) Number of Positions 12 contacts (2 rows) Pitch 5.84 mm terminal pitch ~6.0 mm row spacing High Power Capability Up to ~18 A per contact (application dependent) Voltage rating up to 600V AC/DC Sealed / Rugged Design IP67 rated (dust-tight and waterproof) Suitable for harsh environments Mounting Type Panel mount / through-hole PCB soldering Locking Mechanism Locking ramp + polarization (keying) for secure mating Material & Construction Housing: Glass-filled PBT (UL94 V-0 flame rating) Contacts: Copper alloy with tin plating Durability Designed for automotive-grade reliability Typical mating cycles: ~25 cycles Operating Temperature Approximately -40°C to +125°C #CommonPartsLibrary #Connector #MX150L 19428

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSW-120-01-T-S is a single-row, 20-position female (receptacle) socket strip with a 2.54 mm (0.1") pitch, intended for through-hole PCB mounting. It uses Samtec’s Tiger Buy™ contact system, providing reliable electrical performance and durability for repeated mating cycles. It is commonly used in embedded systems, development boards, and general PCB interconnections, especially where standard 0.1" headers are required. Female header 1x20 2.54mm Key Features Standard 2.54 mm Pitch Industry-standard spacing compatible with most pin headers and prototyping systems 20 Positions, Single Row Ideal for compact signal connections and header interfaces Tiger Buy™ Contact System Provides low insertion force and reliable electrical contact Available in standard or low insertion force variants Through-Hole Mounting Ensures strong mechanical retention and durability on PCBs Tin-Plated Contacts (T option) Cost-effective plating suitable for general-purpose applications High-Speed Capability Supports signals up to ~8 Gbps, depending on application and layout Wide Operating Temperature Range Typically −55 °C to +105 °C, suitable for industrial environments Material Construction Contacts: Phosphor bronze Insulator: High-temperature plastic (e.g., LCP) Versatile Mating Compatibility Mates with common Samtec header series (TSW, MTSW, etc.) and standard 0.025" square posts #CommonPartsLibrary #Connector #SSW-120

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

Connector Header Through Hole, Right Angle 10 position 0.100" (2.54mm) The 1761607-3 is a pluggable terminal block connector manufactured by TE Connectivity. It is designed for reliable wire-to-board connections in industrial and electronic applications. The connector supports screw-clamp termination, allowing secure and reusable wire connections. Its modular design enables easy installation and maintenance, making it suitable for control systems, power distribution, and signal interfacing. Key Features Pluggable terminal block connector Screw-clamp wire termination Reliable mechanical and electrical connection Modular and field-serviceable design Suitable for industrial environments Electrical Characteristics Rated voltage: up to 300 V (typical, application dependent) Rated current: up to 8 A (depending on wire size and conditions) Contact resistance: low contact resistance for stable conductivity Insulation resistance: high insulation resistance Mechanical Characteristics Number of positions: 3 Pitch: 3.5 mm Termination type: screw clamp Wire size range: typically 26 AWG to 16 AWG Mounting type: through-hole PCB Mating type: pluggable header interface Material Properties Housing material: high-temperature thermoplastic Contact material: copper alloy Contact plating: tin plating Flammability rating: UL94 V-0 Environmental Specifications Operating temperature range: −40°C to +105°C RoHS compliant Suitable for industrial applications Applications Industrial control systems Power supply connections Signal interface modules Automation equipment HVAC and building control systems Compliance & Standards RoHS compliant UL recognized (application dependent) IEC standard compliant terminal block design #commonpartslibrary #connector #header

Enclosed AC DC Converters 1 Output 5V 600mA 85 ~ 264 VAC, 120 ~ 370 VDC Input The RAC03-05SK is a compact, encapsulated AC/DC power supply module manufactured by RECOM Power. It is designed for PCB mounting and provides a regulated 5V DC output from a wide AC input range. This module is suitable for low-power industrial, IoT, and household applications requiring reliable isolated power conversion. It features high efficiency, short-circuit protection, and meets international safety standards. Key Specifications Electrical Characteristics Input Voltage Range: 85 – 305 VAC / 120 – 430 VDC Nominal Input Voltage: 100 – 240 VAC Output Voltage: 5 VDC Output Current: 600 mA (max) Output Power: 3 W Efficiency: ~72% (typical) Ripple & Noise: ≤ 100 mVp-p Isolation Voltage: 4000 VAC (input to output) Protection Features Continuous short-circuit protection Overcurrent protection Overvoltage protection Environmental Characteristics Operating Temperature Range: -40°C to +80°C Storage Temperature Range: -40°C to +85°C Humidity: Up to 90% RH (non-condensing) Mechanical Characteristics Mounting Type: Through-hole PCB Package Type: Encapsulated module Dimensions: Approx. 34.8 × 22.5 × 15 mm Weight: ~20 g Safety & Compliance Certified to IEC/EN/UL 62368-1 Reinforced insulation Class II design (no earth connection required) CE compliant Applications Industrial control systems Smart home devices IoT modules Embedded electronics Standby power supplies Manufacturer Information Manufacturer: RECOM Power Series: RAC03-K Part Number: RAC03-05SK #commonpartslibrary #powersupply #acdc #converter

4 Position Wire to Board Terminal Block Vertical with Board 0.197" (5.00mm) Through Hole The WAGO 2604-3104 is a through-hole PCB terminal block designed for secure wire-to-board power and signal connections in industrial and commercial electronic equipment. It features WAGO Push-in CAGE CLAMP® spring connection technology with integrated lever actuation, allowing fast, tool-free wire insertion and removal. The connector is intended for reliable field wiring applications where vibration resistance, ease of maintenance, and compact PCB integration are required. Engineering Specification Manufacturer: WAGO Manufacturer Part Number: 2604-3104 Product Family: PCB Terminal Block Series: 2604 Connector Type: Wire-to-Board Terminal Block Mounting Style: Through-Hole PCB Mount Orientation: Vertical / Top Entry Number of Positions: 4 Pitch Spacing: 5.00 mm Connection Technology: Push-in CAGE CLAMP® Actuation Method: Lever Operated Wire Size Range: 24 AWG to 12 AWG Supported Conductors: Solid, stranded, and ferruled wires Rated Voltage: Up to 400 V IEC, 300 V UL Rated Current: Up to 32 A IEC, 20 A UL Operating Temperature Range: -60°C to +105°C Insulation Material: Polyamide PA66 Contact Material: Electrolytic Copper Contact Plating: Tin-Plated Spring Material: Chrome Nickel Spring Steel Flammability Rating: UL94 V-0 Color: Gray housing with orange lever PCB Contact Type: THT solder pins Application Areas: Industrial controls, power distribution, automation systems, instrumentation, and general PCB power interconnects. #commonpartslibrary #connector #terminalblock

Bridge Rectifier Single Phase Standard 100 V Surface Mount 4-MiniDIP The HD01-T is a compact, high-reliability rectifier diode bridge designed for general-purpose AC-to-DC conversion applications. It integrates four diodes in a single package to provide full-wave rectification, making it suitable for power supply circuits, battery chargers, and low-power AC input stages. The device is optimized for space-constrained PCB designs while maintaining adequate current handling and voltage blocking capability. Key Features Single-phase full-wave bridge rectifier Compact through-hole package High surge current capability Low forward voltage drop Reliable and robust construction Suitable for automated assembly Electrical Characteristics Maximum Ratings Repetitive Peak Reverse Voltage: typically up to 100 V Average Forward Rectified Current: typically up to 1 A Peak Forward Surge Current: high surge tolerance for transient conditions Forward Characteristics Forward Voltage Drop: low, typically around 1.0 V per diode at rated current Reverse Characteristics Reverse Leakage Current: low under rated reverse voltage conditions Mechanical Characteristics Package Type: HD (through-hole, compact square package) Mounting: Through-hole PCB mounting Lead Configuration: 4-pin (AC, AC, +, −) Encapsulation: Molded plastic body for insulation and durability #commonpartslibrary #diodes #bridgerectifier

Connector Header Through Hole 6 position 0.100" (2.54mm) The PEC06SAAN is a compact, low-cost incremental rotary encoder manufactured by Bourns. It is designed for user interface applications requiring precise rotational input, such as volume controls, menu navigation, and position sensing. This encoder provides reliable quadrature output signals and is suitable for through-hole PCB mounting. Its robust mechanical design ensures long operational life and consistent performance in consumer and industrial electronics. Key Features Incremental (relative) rotary encoder Compact, space-saving design Through-hole mounting configuration Quadrature output (A and B channels) Optional integrated push switch (depending on variant) Detent and non-detent options available High reliability with long rotational life RoHS compliant Electrical Characteristics Supply voltage: Typically 5 VDC (logic-level output) Output type: Digital quadrature (A/B signals) Contact resistance: ≤ 100 mΩ Insulation resistance: ≥ 100 MΩ @ 250 VDC Dielectric strength: 300 VAC for 1 minute Mechanical Characteristics Rotation type: Incremental Number of pulses per revolution (PPR): Typically 6 to 24 (variant dependent) Detent positions: Variant dependent Rotational torque: 10 to 70 gf·cm (typical range) Shaft length: Varies by suffix (e.g., 15 mm typical) Shaft type: Knurled or D-cut (variant dependent) Mounting type: Through-hole PCB Terminal type: PC pins Environmental Specifications Operating temperature range: −30°C to +70°C Storage temperature range: −40°C to +85°C Humidity: Up to 85% RH (non-condensing) Mechanical Life Rotational life: Up to 30,000 cycles (typical) Physical Dimensions Body size: Approximately 12 mm × 11 mm × 5 mm (excluding shaft) Shaft diameter: Typically 6 mm Pin pitch: Standard 2.54 mm Applications Consumer electronics (audio controls, appliances) Industrial control panels Embedded systems and microcontroller interfaces Automotive user interfaces Instrumentation and test equipment #commonpartslibrary #connector #header

3 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.150" (3.81mm) Through Hole, Kinked Pin The 691412320003 is a pluggable terminal block connector designed for secure wire-to-board power and signal interconnection in industrial and embedded electronic systems. Manufactured by Würth Elektronik, this connector provides reliable field wiring capability with a compact footprint suitable for PCB mounting applications. The device supports screw-clamp wire termination, enabling dependable electrical contact and easy maintenance in control systems, power distribution modules, automation equipment, and general-purpose electronic assemblies. Its modular pluggable structure allows convenient installation and replacement while maintaining stable mechanical retention and electrical performance. Engineering Specification Product Type: Pluggable terminal block connector Manufacturer: Würth Elektronik Manufacturer Part Number: 691412320003 Connector Style: Plug component for mating terminal block system Mounting Type: Through-hole PCB mount Number of Positions: Three Pitch Spacing: 3.50 mm Wire Termination Method: Screw clamp termination Wire Entry Orientation: Horizontal Contact Material: Copper alloy Contact Plating: Tin plated Housing Material: High-temperature thermoplastic Housing Color: Green Flammability Rating: UL94 V-0 Rated Voltage: Suitable for low-voltage industrial and control applications Rated Current: Designed for moderate power and signal transmission Operating Temperature Range: Industrial-grade operating temperature capability Mating Style: Pluggable locking terminal interface Application Use: Industrial controls, power interfaces, embedded systems, automation equipment, and field wiring connections Compliance: RoHS compliant and lead-free compatible #commonpartslibrary #connector #terminalblock

Battery Contact Clip Multiple (AA, CR2) 1 Cell PC Pin Keystone Electronics 2915 Battery Contact Clip is a through-hole PCB battery contact clip designed for securely mounting cylindrical batteries such as AA and CR2 cells in electronic circuits. Manufactured by Keystone Electronics, this component provides a compact and reliable battery connection solution for embedded systems, portable devices, battery-powered equipment, and prototyping applications. It uses PC pin terminations for easy solder mounting onto printed circuit boards. Key Features Supports cylindrical battery sizes including AA and CR2 Single-cell battery contact clip design Through-hole PCB mounting PC pin termination style Compact low-profile construction Reliable spring-contact battery retention Suitable for portable and battery-powered electronics Durable metal contact construction Easy battery insertion and removal Active production status from Keystone Electronics

Dip Switch SPST 6 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-6LPSTJ is a through-hole terminal block connector designed for secure wire-to-board connections. It features a multi-position configuration with a compact footprint and robust clamping mechanism, making it suitable for industrial and general-purpose electronic applications. The component ensures reliable electrical contact and ease of installation for power and signal wiring. Key Features Multi-position terminal block (6 positions) Through-hole mounting for strong mechanical stability Screw clamp or spring clamp termination (depending on variant) მაღალი reliability for power and signal connections مقاومة عالية للاهتزاز (vibration-resistant design) Standard pitch for compatibility with common PCB layouts Electrical Characteristics Rated Voltage: Typically up to 300 V (application dependent) Rated Current: Typically up to 10–15 A per contact (depends on wire gauge) Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Mechanical Characteristics Number of Positions: 6 Pitch: Typically 5.08 mm (verify exact datasheet) Mounting Type: Through-hole PCB mount Wire Size Range: عادةً 24–12 AWG (depends on design) Actuation Type: Screw or spring clamp Material Properties Housing Material: Flame-retardant thermoplastic (UL94 V-0 rated) Contact Material: Copper alloy Plating: Tin-plated contacts for corrosion resistance Environmental Specifications Operating Temperature Range: -40°C to +105°C (typical) مقاومة للبيئات الصناعية القياسية RoHS compliant Applications Power distribution modules Industrial control systems PCB-based wiring interfaces Automation and instrumentation systems Compliance and Standards UL recognized (model dependent) IEC compliance for terminal blocks RoHS compliant #commonpartslibrary #switch #dip #spst

16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header

Hongfa Europe GMBH PCB Mount Power Relay, 5V dc Coil, 5A Switching Current, SPS The HF49FD/005-1H11TF is part of the Hongfa HF49FD series, which consists of compact, high-sensitivity power relays. It operates using a 5 V DC coil and provides electrical isolation between the control circuit and the load, allowing low-power signals (e.g., from a microcontroller) to switch higher voltages or currents. Key Characteristics Type: Electromagnetic relay (non-latching) Contact Configuration: SPST-NO (1 Form A, normally open) Coil Voltage: 5 V DC Switching Current: up to 5 A Switching Voltage: 250 VAC 30 VDC Mounting Type: Through-hole / PCB mount Size: ~20 × 5 × 12.5 mm (slim design) Coil Power Consumption: ~120 mW (low power) Dielectric Strength: up to 3 kV isolation Functional Overview Uses a coil + mechanical contacts: When 5 V is applied → coil energizes → contacts close When removed → contacts open Provides electrical isolation between: control side (low voltage) load side (higher voltage/current) #Relay

15 Position D-Sub, High Density Receptacle, Female Sockets Connector The Molex 1731130133 is a high-density 15-position D-Sub female connector designed for reliable board-level signal connections in industrial, communication, and computing applications. It features a right-angle through-hole mounting style with gold-plated contacts for improved conductivity and durability. The connector belongs to Molex’s FCT D-Sub connector family and is commonly used in compact electronic systems requiring secure and space-efficient interconnections. Key Features 15-position high-density D-Sub female receptacle Right-angle through-hole PCB mounting Gold-plated copper alloy contacts for reliable signal transmission Steel shell with nickel plating for mechanical durability Supports up to 3A current per contact Operating temperature range: -55°C to +105°C Includes board locks and mounting brackets for secure attachment IP20-rated connector housing Compact 3-row high-density layout for space-saving designs Suitable for industrial control, telecommunications, and computer interfaces #CommonPartsLibrary #Connector

36 Position Receptacle Connector SCSI Through Hole, Right Angle Solder The 112-036-213R001 is a 36-position SCSI Centronics-style female receptacle connector designed for board-mounted I/O and high-reliability cable-to-board connections. It is part of the NorComp 112 series and is commonly used in industrial, computing, and communication equipment where rugged parallel signal interfaces are required. It features a right-angle through-hole PCB mount design with a metal shell and bail-lock mechanism to ensure secure mating and resistance to vibration and accidental disconnects. Key Features 36-position (2-row) Centronics / SCSI interface Female receptacle connector Right-angle through-hole PCB mounting Bail-lock mechanism for secure retention Outer shell / shrouded contact design Gold-plated contacts for reliable low-resistance connection 4-40 threaded flange for mechanical mounting Designed for cable-to-board I/O applications Electrical & Mechanical Highlights Number of contacts: 36 Contact arrangement: dual-row Contact finish: gold flash plating Mounting: PCB through-hole, right-angle Locking: metal bail latch system Connector type: SCSI / Centronics style I/O connector Typical Applications Industrial controllers Legacy computing / SCSI equipment Printers and scanners Measurement and test equipment High-reliability board I/O interfaces #CommonPartsLibrary #Connector