Battery Holder (Open) 1/2AA 1 Cell PC Pin #SMD #holder #AA #open #2AA

SMD battery holder designed for two AAA (No.7) cells, suitable for surface-mount applications. #7 battery

SWITCH SMD 4PIN

Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

Forked from SeeedStudio. Then imported the official SMD footprint from the [seeed getting started page](https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/) Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios. #SeeedStudio #xiao

The DIL 16 SMD M from Fischer Elektronik is a 16-pin, high-precision SMD socket with a pitch of 2.54 mm for DIL ICs

Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. In this version, you must also provide your own UART interface. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

Circuit for hardware debouncing a SMD tactile switch with RC network pull-down.