680µF 35V Aluminum Electrolytic Capacitors Radial, Can 2000Hrs @ 85°C #CommonPartsLibrary #Capacitor #AluminumCapacitor #THT

22 µF 50V Aluminum Electrolytic Capacitors Radial, Can 2000 Hrs @ 105°C #CommonPartsLibrary #Capacitor #Aluminum #Electrolytic #WCAP-ATG5

SmartDeskPet v1.0 Shield Stage 1 status: - Goal: 5V input -> dual AMS1117-3.3 rails (+3V3_MCU and +3V3_WIFI) with common GND. - Note: Keep power nets explicitly named (avoid unnamed nets) to keep ERC happy. Stage 1 completion checklist: - Mark J1 Pin_1 (+5V) as a Power Output pin to satisfy ERC power-driver checks. - Verify all GND symbols/returns are on the same GND net. - Keep +5V_SERVO isolated from the main +5V net (only share GND). Stage 2 preparation notes (MPN/LCSC + layout constraints): - MPN/LCSC targets to define before Stage 2 exit: - AMS1117-3.3 (SOT-223): set exact MPN and (optionally) LCSC PN for both U1 and U2. - 100nF capacitor (0603): set MPN/LCSC for all 0603 100nF decouplers. - 4.7k resistor (0603): set MPN/LCSC for I2C pull-ups R1 and R2. - 1000uF bulk capacitor (radial): set MPN/LCSC for C7 (CP_Radial_D10.0mm_P5.00mm). - DC005 power jack/regulator input: select exact DC005 footprint + MPN/LCSC (if used). - 2.54mm headers/sockets: set MPN/LCSC for H1, H2, J1, J3, J4, J5, P3, P4, P5, and J2. - ESP-01S antenna keepout: - Reserve a copper keepout under and in front of the ESP-01S onboard antenna. - No copper pours/traces/components in the antenna region (top and bottom) per module guidelines. - H1/H2 header spacing: - Maintain 1000 mil spacing between H1 and H2 header centerlines (shield mechanical requirement). - Silkscreen placeholders: - Add silkscreen labels for: 5V IN, GND, +3V3_MCU, +3V3_WIFI, SERVO1, SERVO2, I2C SDA/SCL, DHT11, ASRPRO UART2, ESP-01S UART3. - Add placeholder text for: MPN, LCSC, board revision, and date code. Stage 3 layout constraints (placement and routing guidance): - Connector placement strategy: - Place H1 and H2 first to lock the shield mechanical interface; enforce 1000 mil spacing. - Place J1 and any DC005 input at the board edge for easy access. - Designated power area planning: - Group U1, U2, and C7 near the 5V entry point; keep high-current 5V and regulator loops short. - Use wide copper for +5V and any servo supply; stitch GND around power section. - Antenna keepout boundaries: - Place J2 (ESP-01S socket) at a board edge with the antenna facing outward. - Enforce a top-and-bottom copper keepout in the antenna region; keep noisy power traces away.

10 µF 50 V Aluminum Electrolytic Capacitors Radial, Can 2000 Hrs @ 85°C #CommonPartsLibrary #Capacitors #AluminumElectrolyticCapacitors #ThroughHole

470 µF 25 V Aluminum Electrolytic Capacitors Radial, Can 9000 Hrs @ 105°C #CommonPartsLibrary #capacitor #Aluminum-capacitor #THT #KZN

Red 640nm LED Indication - Discrete 1.85V Radial #CommonPartsLibrary #Optoelectronics #LEDIndication-Discrete #RED

Supercapacitors / Ultracapacitors 2.7V 50F 18X40mm Radial Custom made footprint from Datasheet dimensions. Not compliant to any standards. No 3D Model #capacitor #part

100 µF 25 V Aluminum Electrolytic Capacitors Radial, Can 5000 Hrs @ 105°C #CommonPartsLibrary #Capacitors #AluminumElectrolyticCapacitors #ThroughHole #Radial

1000 pF ±10% 50V Ceramic Capacitor X7R Radial #CommonPartsLibrary #Capacitor #Radial

The TDK FG series of Multilayer Ceramic Capacitors (MLCC) with dipped radial leads are designed for commercial-grade applications, offering a halogen-free and RoHS compliant solution. These capacitors are available with lead pitches of 5.0mm and 2.5mm, and come in various dimensions ranging from 4.0x5.5mm to 8.5x11.0mm. The FG series includes types such as FG28, FG24, FG26, FG20, FG22, FG23 for the 5.0mm lead pitch, and FG18, FG14, FG16, FG11 for the 2.5mm lead pitch. These capacitors feature a voltage rating of 10V to 630V and a capacitance range from 1pF to 47uF. They are suitable for applications including noise reduction in motors, bypass and smoothing capacitors for switching power sources, snubber circuits, and PFC input filters. The components are characterized by various temperature coefficients including C0G, X5R, X7R, X7S, and X7T, with operating temperatures ranging from -55°C to +125°C. The FG series is available in both bulk and taped packaging styles, designed to meet the needs of general electronic equipment such as AV equipment, telecommunications, home appliances, and industrial robots.

220 µF 35 V Aluminum - Polymer Capacitors Radial, Can - SMD 22mOhm 2000 Hrs @ 105°C #Commonpartslibrary #generic-part-template #Capacitor #Aluminum #Polymer #SMD #Radial

10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan

10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan

10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan