Welcome to your new project. Imagine what you can build here.

Template for Arduino Nano Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Nano itself along with the board outline on the silkscreen. #Arduino #Nano #Shield #template #project #project-template

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Template for Arduino Nano Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Nano itself along with the board outline on the silkscreen. #Arduino #Nano #Shield #template #project #project-template

Arduino Nano-based DCS-BIOS RS-485 interface module using a MAX487CPA+ transceiver and two RJ45 sockets for bus daisy-chaining.

Industrial 24 V DC MESBox controller with embedded Linux SOM, STM32 real-time I/O, triple RJ45 Ethernet, TFT display, isolated inputs, protected transistor outputs, offline memory, surge/reverse-polarity protection, and EMC-focused layout constraints.

Passive 2-layer audio turnaround/breakout PCB with two side-by-side shielded EtherCon RJ45 jacks wired pin-for-pin and four 3-pad XLR-style solder groups for balanced line-level channel taps, using common shield/GND and bottom-layer ground pour.

UK Smart Wall Switch Back Board: 802.3af PoE-powered 65x65mm relay and energy-monitoring back board with RJ45, isolated 5V/3.3V rails, W5500 Ethernet, BL0942 metering, touch ICs, and 12-pin pogo interface.

DIN-rail ESP32-S3 mains-powered controller with isolated 5 V supply, Ethernet RJ45, USB-C service port, and central LED module connector.

CNC hydraulic press brake controller with STM32H743, ADS1256, 5x DAC8501 ±10V outputs, 3x AD598 LVDT interfaces, isolated 24V digital inputs, 100BASE-TX Ethernet, watchdog, E-stop hardware disable, and 4-layer 220mm x 160mm PCB architecture. Domains: field 24V I/O, precision analog, logic/Ethernet. Safety behavior: E-stop and valve-disable force all analog command outputs to 0V-safe state and disable field enables; watchdog and power-good supervisor reset MCU on comms or rail faults. PCB constraints: L1/L4 signal+components, L2 solid GND, L3 power plane, 1.0mm board inset margin, RJ45 at edge, field connectors on opposite edge, isolation corridor between field wiring and logic/Ethernet, 4x M4 plated mounting holes inset 10mm from corners.

Ruggedized Neutrik EtherCON RJ45 Ethernet Interface PCB with ESD Protection

Welcome to your new project. Imagine what you can build here.