Kitchen LED Strip Motion & Ambient-Light Controller with 12 V PWM Dimming, PIR Sensor, Ambient Light Sensor, MCU Control, Buck Regulator, and Protection Circuits (TVS, PTC Fuse, Reverse-Polarity Diode) #KitchenLEDController #MotionDetection #AmbientLightSensor

An ATtiny13 is more than sufficient to control almost any number of NeoPixels via an IR remote. The NeoController was originally developed as a tester for 800kHz NeoPixel strips. Since there was still so much flash left in the ATtiny13, an IR receiver was integrated so that some parameters can be controlled with an IR remote control. In this way, it is also suitable as a simple and cheap remote-controlled control unit for NeoPixels. Due to its small size (21.6mm x 11.4mm), it can be soldered directly to the LED strip without any problems. The power supply via a USB-C connection enables currents of up to 3A. There is still more than a third of the flash memory left for additional ideas.

RGBW SMD,5x5mm Light Emitting Diodes (LED) ROHS #LED#Addressable

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Through Hole straight socket strip, 01x07, 2.54mm pitch, single row #connector #pinsocket #tht

Wi-Fi LED strip controller made with few goals: Dual voltage support 12V and 24V 2 independent channels for color temperature adjustments No high pitch noise in all modes Powerful enough to handle current up to 17.5A (in total, limited by connectors) Control buttons on the device body Connectors for external buttons Can be used with already installed LED strips Support of open source firmware, like https://esphome.io/

Wi-Fi LED strip controller made with few goals: Dual voltage support 12V and 24V 2 independent channels for color temperature adjustments No high pitch noise in all modes Powerful enough to handle current up to 17.5A (in total, limited by connectors) Control buttons on the device body Connectors for external buttons Can be used with already installed LED strips Support of open source firmware, like https://esphome.io/

Modular horizontal strip PCB for a wall calendar matrix: 3 month rows by 31 day columns, with 93 WS2812B/SK6812-style RGB LED cells, 93 SMD tactile switches, anti-ghosting diodes, and dual I2C GPIO expanders for button matrix scanning.

ATmega-based SMD controller for ten 12 V LED strip channels, each rated up to 2 A, with one pushbutton selecting and retaining one of ten lighting patterns.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

A base to attach multiple LED strips to, and use PCB traces to connect them.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

- Drives WS2812 IC LED Strip 144Pixels/m

Through Hole straight socket strip, 01x20, 2.54mm pitch, single row #connector #pinsocket #tht

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Production-intent ESP32-C6 controller for WS2812B/WS2815 addressable LED strips with 5V/10A input protection, strip high-side switching, 5V data level shifting, user buttons, and antenna keepout requirements.

Single-channel 12-24V LED strip dimmer with ESP32-WROOM BLE control, hall pairing input, red status LED, and safe-fail 220VAC protection strategy

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.