This project is designed to measure water level of two tanks using ultrasonic sensors interfaced with the ESP32 microcontroller. The design leverages the processing power and wireless connectivity of the ESP32 to accurately monitor water levels and support automated water management processes. Key components include two ultrasonic sensors for precise distance measurement, robust voltage regulation using an LM2596 buck converter, and reliable power management circuits. Its modular design approach facilitates easy expansion and integration with other systems, making it an ideal solution for both DIY enthusiasts and professionals in automated fluid control and IoT applications. Firmware: https://github.com/jharwinbarrozo/ESP32-Dual-Ultrasonic-Water-Level-Monitoring-System #ESP32 #UltrasonicSensor #WaterLevelSensor #LM2596 #VoltageRegulator #ModularDesign #IoT #DIYProjects #ElectronicsDesign #automation

OctoPower is a monitoring hardware, it provides an end-to-end electricity monitoring solution perfect for monitoring home consumption, solar generation or any AC electrical circuit for that matter. Key features : - 8x clip-on CT current sensor - Full Real/Active power measurement & continuous sampling. - Cumulative energy persisted on reboot. - Wifi (with WPS) and Ethernet support - It send all data on mqtt topic - It can be configurable mqtt topics, calibration, enable/disable wifi over a mqtt api - Upgrade firmware over local network

The Texas Instruments MSP430FR604x and MSP430FR603x family comprises highly integrated ultrasonic sensing and measurement system-on-chips (SoCs) designed specifically for water and heat metering applications. The featured components, including MSP430FR6047, MSP430FR60471, MSP430FR6045, MSP430FR6037, MSP430FR60371, and MSP430FR6035, deliver best-in-class ultrasonic water flow measurement with ultra-low power consumption. These microcontrollers excel with an active mode current consumption of approximately 120 µA/MHz and a standby mode power draw as low as 450 nA with a real-time clock (RTC) enabled. Key functionalities include a high-precision differential time-of-flight (dTOF) accuracy of less than 25 ps, integrated analog front-end, programmable pulse generation (PPG), and an analog comparator. They also interface directly with standard ultrasonic sensors up to 2.5 MHz and feature up to 256KB FRAM, robust RAM options, and integrated LCD drivers for up to 264 segments. The embedded low-energy accelerator (LEA) enhances digital signal processing capabilities, making these components ideal for battery-powered metering solutions. Peripherals include multiple enhanced serial communication interfaces, high-performance ADCs, DMA controllers, and a suite of timers and encryption modules. These features combine to offer a powerful solution for high-accuracy, low-cost, and ultra-low-power metering applications.

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.

This project involves designing a PCB for the lid assembly of an open-source laptop. The design integrates various sensors, including a microphone, camera, and ambient light sensor, ensuring precise alignment with the display glass. It features touch sensors to control LED lighting, spring-loaded contacts for touch-key interaction, and 3D-printed light diffusers for efficient lighting. Additionally, the PCB includes a power management system with status LEDs and a PFC for connecting to the external laptop PCB. The goal is to create a versatile, upgradeable, and user-friendly component for the laptop's lid. Specific parts of the project include 1. Microphone - Audio input capture 2. Ambient Light Sensor Module - Light intensity measurement 3. Camera - Video capture 4. LDO Regulators (3 TLV74 Series) - Voltage regulation for different components 5. Crystal - Clock generation 6. Touch Sensor Controller - Touch-key interaction 7. Flip-Flop - State keeping in logic circuits 8. LEDs (LTRBR37G Series) - Lighting indication 9. FPC Connector - Interface with main laptop PCB

Simulation-Ready 9-Resistor Network with DC Source and Measurement Node

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Panel-connected home energy monitor with non-invasive branch current sensing, whole-home power measurement, and smart outlet/switch integration for appliance-level energy visibility.

High-end 2-channel USB Audio Class 2.0 measurement interface for Smaart/REW use, with XMOS digital audio, isolated converter domain, smart encoder/LED UI, precision mic input, DAC line output, loopback ADC, phantom power, and protected USB-C power input.

Simple 4-wire RTD measurement system using ATMEGA and ADI MAX31865

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

This is a capacitive soil sensor - we use the built-in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

ESP32-controlled, independently powered single-channel 1S LiPo DC load-step measurement front end intended for later multi-channel expansion.

ESP32-controlled, independently powered single-channel 1S LiPo DC load-step measurement front end intended for later multi-channel expansion.

Bluetooth-connected espresso scale with load-cell measurement, local data logging, a segment-style display, USB-C charging, and single-cell LiPo power.

USB-C powered companion potentiostat/supply board for the 96-Well Electrode Plate. Provides Arduino-controlled DAC setpoint generation, OLED/encoder UI, 16-bit current measurement, hardware current-limit shutdown, load-detect LED, three SMB outputs, and INT/EXT routing to binding posts for external potentiostat use.

BLE smart espresso scale with USB-C power, single-cell Li-ion battery charging, load-cell measurement, local data logging, and an integrated segment/display interface.

USB-C powered smart espresso scale with ESP32 phone connectivity, load-cell measurement, local data storage, and an integrated display for live weight/timer readout.

Battery-powered smart espresso scale with BLE/WiFi-capable MCU, load-cell measurement, OLED interface, USB-C charging, and debug/programming access.

Portable AI-powered spectral reflectance analyzer based on a Radxa Zero 3W carrier PCB, with AS7341 spectral sensing, GPS, SPI touchscreen LCD, microSD logging, USB-C LiPo charging, and integrated optical LED measurement head.