The LoST 3296 board features an Low Power STM32, an RFM95 Module for LoRA connectivity and a connector to interface different sensors. You can hook up a UART module, I2C module and a module using the RS485. The board is powered by the USB-C port

Vertical USB & I2C Interface Module – Organized Power/Data Terminal Block

I2C to dual PWM controller. The LED-Warrior18, manufactured by Code Mercenaries, is an I2C to dual channel PWM LED driver specifically designed to provide seamless brightness control for LED applications. This component, available in SOIC8 package (LW18-S) and as a ready-to-use module (LW18-01MOD), offers dual 16-bit PWM outputs with a dimming range from 0.001% to 100% and operates at a PWM frequency of 730 Hz. It supports programmable period lengths for higher-frequency or lower-resolution operation and includes an 8-bit data to logarithmic mapping feature for smoother dimming operations with just 256 steps. The LED-Warrior18 is engineered for minimal external circuitry with a 5V power supply requirement, offering ease of use in various lighting applications. It also features a sync mode for synchronized control of multiple units and customizable power-on status settings, making it highly versatile for standalone operations or integrated systems. Additionally, custom variants of both the chip and module are available, catering to specific application needs. The module version, LW18-01MOD, simplifies integration by including terminal blocks and supporting up to 4A load sink current for each output. The LED-Warrior18 stands out for its straightforward interface and operational flexibility, providing a comprehensive solution for advanced LED dimming and control projects.

The TCA9555 is a 16-bit I/O expander for the 1.65-V to 5.5-V Vcc operation designed by Texas Instruments. It serves to enhance the general-purpose remote I/O expansion for most microcontroller families via the I2C interface. Key features of the TCA9555 include low standby-current consumption, 5-V I/O ports, 400-Khz fast I2C bus, and ESD protection. It finds applications across personal computers, servers, routers, industrial automation equipment, and products with GPIO-limited processors.

This project is a reference design for the BHI160B sensor featuring an I2C interface with QWIIC and pin headers. The design includes decoupling capacitors and pull-up resistors for signal integrity. It's powered by a 3.3V supply. #referenceDesign #project #sensor #accelerometer #BHI160B #referenceDesign #imu #stm #template #reference-design

This project is a reference design for the BHI160B sensor featuring an I2C interface with QWIIC and pin headers. The design includes decoupling capacitors and pull-up resistors for signal integrity. It's powered by a 3.3V supply. #referenceDesign #project #sensor #accelerometer #BHI160B #referenceDesign #imu #stm #template #reference-design

This is a 16x2 LCD display screen with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background.

This project is a Wearable Accelerometer based on BHI160B sensor with an I2C interface. The design includes decoupling capacitors and pull-up resistors for signal integrity. It's powered by a 3.3V supply. #wearables #referenceDesign #project #sensor #accelerometer #BHI160B #referenceDesign #imu #stm #template #reference-design

This is a 16x2 LCD display screen with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background.

Design of an RGB LED control system using a TCA6424A I/O expander. Features multiple RGB LEDs driven by resistors via an I2C interface. Integrates power supply and reset circuitry.

This project is a Wearable Accelerometer based on BHI160B sensor with an I2C interface. The design includes decoupling capacitors and pull-up resistors for signal integrity. It's powered by a 3.3V supply. #wearables #referenceDesign #project #sensor #accelerometer #BHI160B #referenceDesign #imu #stm #template #reference-design

The TCA9555 is a 16-bit I/O expander, designed by Texas Instruments, that is compatible with the I2C and SMBus communication protocols. It operates between 1.65 and 5.5 volts and can be used to extend the functionality of most microcontroller families via the I2C interface. The system master can enable the I/O pins as either inputs or outputs and can invert the polarity of the Input Port register. This part is widely used in applications like servers, personal computers, automation equipment, routers, and other electronics with limited GPIO availability.

This is a 16x2 LCD display screen with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background.

The TCA9555 is a 16-bit I/O expander for the I2C bus, designed for voltage operation from 1.65 V to 5.5 V. It provides general-purpose remote I/O expansion for most microcontroller families through the I2C interface. This device features low standby- current consumption, 5-V tolerant I/O ports, and an open-drain active-low interrupt output. It is commonly used for controlling LEDs, controlling enable or reset signals of other devices, and reading the outputs of other devices or buttons.

The TCA9555 by Texas Instruments is a low-voltage, 16-bit I2C and SMBus I/O expander designed to provide general-purpose remote I/O expansion for most microcontroller families via the I2C interface. Operating at a voltage range of 1.65V to 5.5V, this component integrates two 8-bit Configuration, Input Port, Output Port, and Polarity Inversion registers, making it an ideal solution for applications requiring additional I/Os such as servers, personal computers, routers, industrial automation equipment, and products with GPIO-limited processors. The TCA9555 features a low standby-current consumption of 3.5uA maximum, compatibility with 5V I/O ports, a 400kHz Fast I2C Bus, and includes an open-drain active-low interrupt output which enhances its utility in complex systems. Noteworthy for its high-current drive capability suitable for directly driving LEDs, the TCA9555 also brings a configurable slave address with 3 address pins, providing the flexibility needed in varied application requirements. Offering robust protection with latch-up performance exceeding 100mA per JESD 78, Class II, and ESD protection exceeding JESD 22, the TCA9555 combines reliability with expansive functionality for sophisticated electronic designs.

Design of an RGB LED control system using a TCA6424A I/O expander. Features multiple RGB LEDs driven by resistors via an I2C interface. Integrates power supply and reset circuitry. #polygon

The TCA9555, manufactured by Texas Instruments, is a low-voltage 16-bit I/O expander designed for both I2C and SMBus for operation with a supply voltage ranging from 1.65 V to 5.5 V. This component is aimed at providing general-purpose remote I/O expansion for most microcontroller families through the I2C interface. The TCA9555 is characterized by its low standby-current consumption of maximum 3.5 uA and includes notable features such as open-drain active-low interrupt output, 5-V tolerant I/O ports, and configurable slave addresses through 3 address pins. It is designed to assist in applications such as servers, routers, personal computers, personal electronics, and industrial automation equipment, among others. Its multiple package options, including TSSOP, SSOP, WQFN, and VQFN, accommodate different sizes and form factors suitable for diverse implementation requirements. The device distinguishes itself with a polarity inversion register and latched outputs capable of directly driving LEDs, showcasing versatility in usage. Its protection features exceed JESD 22 standards for ESD, ensuring robustness for industrial applications. The TCA9555's compatibility with various microcontrollers and support for up to 400-kHz I2C bus speed make it an efficient solution for expanding I/O capabilities in space-constrained applications.

Compact 2-layer ESP32-S3-MINI-1 piezo TX/RX board for a shared 3 MHz transducer node. Includes USB 5 V input, TP4056 single-cell LiPo charging, TLV75533 3.3 V regulation, ferrite-bead isolated 3V3_ANALOG rail, ~12 V pulsed TX boost rail, low-gate-charge NMOS transmit driver, clamp-protected RX input, 2-stage OPA836 analog receive chain, envelope detector, ADC interface, TMP117 I2C temperature sensor, and status LEDs. Layout intent: piezo centered, RX chain within 10 mm of PIEZO_NODE, boost section remote from RX, digital and analog partitioning, and AGND/DGND star connection near RX front end.

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

Raspberry Pi Zero 2W with 5V MQ Gas Sensor and ADS1115 I²C ADC: Breadboard Interface Design

Production-intent Raspberry Pi Compute Module 5 carrier board for SitePulse, integrating rugged wide-input power, CAN bus, protected relay/engine-control outputs, I2C expansion, Predator engine data sniffer interface, debug/status I/O, and field-ready connectors for job-site/off-grid use.

ESP32 sensor node with an I2C temperature sensor and load-cell ADC interface.

Glove interface board using Seeed Studio XIAO ESP32S3. Manufacturing path updated for partial assembly: preserve existing glove interface circuitry (FSR inputs on J3-J7, I2C on J8, SPI on J9, pull resistors R1-R7, decoupling C1) and source U1 separately because JLCPCB stock for MPN 113991114 is unavailable. Assemble all other parts normally, leave U1 for customer-supplied/manual installation, and do not substitute U1 unless a verified XIAO-format pin-compatible replacement is explicitly approved.

The TUSB8041, developed by Texas Instruments, is a four-port USB 3.0 hub intended for use in computer systems, docking stations, monitors, and set-top boxes, providing simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port as well as on the downstream ports. This component supports battery charging features, enabling Charging Downstream Port (CDP) and Dedicated Charging Port (DCP) modes, compliant with the Chinese Telecommunications Industry Standard YD/T 1591-2009, and introduces an automatic mode for transparent support for BC devices and devices supporting Divider Mode charging solutions. It offers customization through OTP ROM, I2C EEPROM or via an I2C/SMBus slave interface for Vendor ID (VID), Product ID (PID), port customizations, and manufacturer and product strings. The TUSB8041 comes in a 64-pin RGC package and is available in both commercial (0°C to 70°C) and industrial (-40°C to 85°C) temperature ranges, part numbers TUSB8041 and TUSB8041I respectively, with an operating voltage requirement of 3.3V for I/O and 1.1V for the core. This hub doesn't require special drivers as it's designed to work seamlessly with any operating system supporting the USB stack, making it a highly adaptable solution for expanding USB connectivity in a wide range of applications.

Arduino-compatible pH probe interface using a high-impedance analog buffer and ADS1115 16-bit I2C ADC for improved pH measurement sensitivity.

Compact ESP32-S3 Smart Glasses Starter PCB with OV2640 Camera, I2C Mux, I2S Audio, LiPo Charging, and USB-C Debug Interface

The LoST 3296 board features an Low Power STM32, an RFM95 Module for LoRA connectivity and a connector to interface different sensors. You can hook up a UART module, I2C module and a module using the RS485. The board is powered by the USB-C port

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

series is an industrial-grade general-purpose microcontroller designed based on QingKe RISC-V2A core, which supports 48MHz system main frequency in the product function. The series features wide voltage, single-wire serial debug interface, low-power consumption and ultra-small package. It provides commonly used peripheral functions, built-in 1 group of DMA controller, 1 group of 10-bit analog-to-digital conversion ADC, 1 group of op-amp comparator, multiple timers, standard communication interfaces such as USART, I2C, SPI, etc. The rated operating voltage of the product is 3.3V or 5V, and the operating temperature range is -40℃～85℃ industrial- grade.

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

The RP2350, developed by Raspberry Pi Ltd, is a high-performance microcontroller designed to cater to a broad range of applications requiring efficient power management, advanced security features, and versatile IO options. This microcontroller stands out with its dual-core architecture, featuring either Cortex-M33 or Hazard3 processors operating at up to 150 MHz, ensuring robust performance for complex applications. It boasts a substantial 520 KB of on-chip SRAM distributed across 10 independent banks, enhancing parallel data processing capabilities. Additionally, the RP2350 supports up to 16 MB of external QSPI flash/PSRAM for extensive program and data storage, further expandable via an optional second chip-select. A notable feature of the RP2350 is its integrated on-chip switched-mode power supply, designed to generate core voltage efficiently, complemented by a low-quiescent-current LDO mode for reduced power consumption in sleep states. Security is a paramount feature of the RP2350, offering options for boot signing with key fingerprint in OTP, hardware mitigations against fault injection attacks, and a hardware SHA-256 accelerator for cryptographic operations. The microcontroller is also equipped with a comprehensive set of peripherals, including USB 1.1 controller and PHY, multiple UARTs, SPI, and I2C controllers, 24 PWM channels, and 12 programmable IO (PIO) state machines, providing extensive interface capabilities. The RP2350 is available in QFN-60 and QFN-80 packages, with or without flash-in-package options, catering to various design requirements and application needs.

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

INA3221 current and voltage monitor interface for an HC-SR04 ultrasonic sensor, with 5V sensor power routed through a shunt and I2C output to a host MCU.

ESP32-S3 touch display development board standardized on a portrait ILI9341 TFT by default, preserving USB-C power, CP2102N USB-UART, I2C touch, PCM5102A audio, microSD, and expansion while assigning KEY1-KEY5 to BOOT, RESET, USER1, USER2, and USER3. The next design pass is driven by a portrait-oriented board resize and user-facing edge placement of the display area, touch interface, controls, and primary connector access.

FlowState Headband EVT1 — 4-Channel EEG Calibration Device Closed-loop EEG neurofeedback headband for theta/beta baseline calibration. 4-layer mixed-signal PCB, 40x30mm. Core ICs: - ADS1299-4PAG (TI) — 4-channel 24-bit EEG analog front end, SPI interface, 250 SPS - nRF5340 (Nordic) — Dual-core BLE 5.3 SoC, 128 MHz app core + 64 MHz network core Key requirements: - Separate analog and digital power domains (dual LDO: LP5907 for AVDD, AP2112 for DVDD) - Split analog/digital ground planes with single-point connection - 6 electrode inputs (4 active + 1 reference + 1 DRL) with individual TVS ESD protection on each - LIS2DH12 accelerometer (I2C) for motion artifact detection - MCP73831 USB-C battery charging (300-500 mAh LiPo) - 2.4 GHz chip antenna or PCB trace antenna at board edge with 10mm keepout - Conformal coating for sweat/moisture protection Reference designs: - Analog front-end: TI ADS1299 EVM (SBAS499) - Digital/BLE: Nordic nRF5340 DK reference schematic Critical constraint: Microvolt-level EEG signals — analog input routing and power supply filtering are the highest-priority layout concerns.

SmartDeskPet v1.0 Shield Stage 1 status: - Goal: 5V input -> dual AMS1117-3.3 rails (+3V3_MCU and +3V3_WIFI) with common GND. - Note: Keep power nets explicitly named (avoid unnamed nets) to keep ERC happy. Stage 1 completion checklist: - Mark J1 Pin_1 (+5V) as a Power Output pin to satisfy ERC power-driver checks. - Verify all GND symbols/returns are on the same GND net. - Keep +5V_SERVO isolated from the main +5V net (only share GND). Stage 2 preparation notes (MPN/LCSC + layout constraints): - MPN/LCSC targets to define before Stage 2 exit: - AMS1117-3.3 (SOT-223): set exact MPN and (optionally) LCSC PN for both U1 and U2. - 100nF capacitor (0603): set MPN/LCSC for all 0603 100nF decouplers. - 4.7k resistor (0603): set MPN/LCSC for I2C pull-ups R1 and R2. - 1000uF bulk capacitor (radial): set MPN/LCSC for C7 (CP_Radial_D10.0mm_P5.00mm). - DC005 power jack/regulator input: select exact DC005 footprint + MPN/LCSC (if used). - 2.54mm headers/sockets: set MPN/LCSC for H1, H2, J1, J3, J4, J5, P3, P4, P5, and J2. - ESP-01S antenna keepout: - Reserve a copper keepout under and in front of the ESP-01S onboard antenna. - No copper pours/traces/components in the antenna region (top and bottom) per module guidelines. - H1/H2 header spacing: - Maintain 1000 mil spacing between H1 and H2 header centerlines (shield mechanical requirement). - Silkscreen placeholders: - Add silkscreen labels for: 5V IN, GND, +3V3_MCU, +3V3_WIFI, SERVO1, SERVO2, I2C SDA/SCL, DHT11, ASRPRO UART2, ESP-01S UART3. - Add placeholder text for: MPN, LCSC, board revision, and date code. Stage 3 layout constraints (placement and routing guidance): - Connector placement strategy: - Place H1 and H2 first to lock the shield mechanical interface; enforce 1000 mil spacing. - Place J1 and any DC005 input at the board edge for easy access. - Designated power area planning: - Group U1, U2, and C7 near the 5V entry point; keep high-current 5V and regulator loops short. - Use wide copper for +5V and any servo supply; stitch GND around power section. - Antenna keepout boundaries: - Place J2 (ESP-01S socket) at a board edge with the antenna facing outward. - Enforce a top-and-bottom copper keepout in the antenna region; keep noisy power traces away.

Architectural Lavender Translation Collar – ESP32‑S3 Wi‑Fi + LoRa, USB‑C, Li‑ion, low‑power design Overview Experience a cutting-edge IoT solution with this low‑power board built around the ESP32‑S3‑MINI‑1‑N8. Designed for seamless Wi‑Fi (2.4 GHz), BLE, and LoRa (868 MHz) connectivity, this board integrates ENS161 and ENS210 sensors over I2C alongside an RFM95W‑868 LoRa radio on SPI. It is powered via a 3.7 V Li‑ion cell with USB‑C charging up to 500 mA, complete with full battery protection, a robust 3.3 V rail tailored for Wi‑Fi burst currents, and per‑peripheral power gating to enhance energy efficiency. Core Features • MCU: ESP32‑S3‑MINI‑1‑N8 equipped with an onboard PCB antenna for 2.4 GHz Wi‑Fi/BLE, ensuring optimal wireless performance. • Sensors: Integrated ENS161 and ENS210 sensors utilize a shared I2C bus with controllable 4.7 kΩ pull‑ups for streamlined communication. • LoRa Radio: The RFM95W‑868 module, connected via SPI, enables long‑range communication at 868 MHz. Power & USB‑C Connectivity • Battery: A reliable 3.7 V 1200 mAh Li‑ion battery connected via a right‑angle JST‑PH 2‑pin connector features built‑in battery protection. • Charging: The USB‑C receptacle, with CC resistors and TVS protection on D+/D− along with series resistors, supports fast, safe charging with a current limit of 500 mA. • Regulation: A dedicated 3.3 V regulator capable of handling Wi‑Fi burst currents coupled with bulk and high‑frequency decoupling ensures stable operation, supported by status LEDs indicating power and charge states. Low‑Power Control • Peripheral Management: Load switches allow selective power‑gating of the ENS161, ENS210, and RFM95W modules, controlled directly by ESP32‑S3 GPIOs. • Energy Efficiency: Controllable I2C pull‑ups minimize idle current, vital for prolonged battery life in IoT applications. RF and Antenna Integration • 2.4 GHz: Utilizes the integrated PCB antenna on the ESP32‑S3 with proper ground/metal keep‑out zones for optimal signal integrity. • 868 MHz: Features a controlled‑impedance feed from the RFM95W to a PI matching network (C‑L‑C pads) with flexible antenna options—selectable via SMA connector, chip antenna, or PCB trace—and includes RF ESD protection. Connectivity & Debug Features • USB‑C Interface: Provides secure data connectivity with integrated safeguards and proper terminations. • Debugging: A comprehensive programming/debug header exposes EN, BOOT, and UART lines, with test points on key rails and buses (3V3, VBAT, SCK, MOSI, MISO, SDA, SCL, RESET/EN, GND) to simplify development and troubleshooting. Design Verification • Rigorous ERC/DRC and decoupling checks ensure adherence to component ratings and optimal signal routing. • Maintain RF keep‑outs and impedance‑controlled traces for both 2.4 GHz and 868 MHz paths, securing reliable performance even during high‑intensity operations. #IoT #ESP32S3 #LoRa #LowPowerDesign #USB-C #WirelessConnectivity #BatteryPowered #RFDesign

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #referenceDesign #batterycharger #template #bms #monitor #STC3115 #stm #reference-design #polygon

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm