100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm #CommonpartsLibrary #Filters #FerriteBeads #Chips

Seeed Studio CAN Bus Breakout Board is an expansion board compatible with all XIAO development boards. The integration of the MCP2515 controller and SN65HVD230 transceiver chips on the expansion board ensures seamless and efficient communication over the CAN Bus.

1 kOhms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 1A 200mOhm #CommonpartsLibrary #Filters #FerriteBeads #Chips

1 kOhms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 1A 200mOhm #CommonpartsLibrary #Filters #FerriteBeads #Chips

220 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2.2A 50mOhm #CommonpartsLibrary #Filters #FerriteBeads #Chips

The LTS-4301JR is a 0.4 inch (10.0 mm) digit height single digit seven-segment display. This device utilizes AlInGaP super red LED chips, which are made from AlInGaP on a transparent GaAs substrate, and has a gray face and white segments. Display Modules - LED Character and Numeric Red 7-Segment 1 Character Common Cathode 2V 20mA 0.508" H x 0.382" W x 0.276" D AL304G (12.90mm x 9.70mm x 7.00mm) 10-DIP (0.300", 7.62mm) FEATURES - 0.4 inch (10.0 mm) DIGIT HEIGHT. - CONTINUOUS UNIFORM SEGMENTS. - LOW POWER REQUIREMENT. - EXCELLENT CHARACTERS APPEARANCE. - HIGH BRIGHTNESS & HIGH CONTRAST. - WIDE VIEWING ANGLE. - SOLID STATE RELIABILITY. - CATEGORIZED FOR LUMINOUS INTENSITY. #commonpartslibrary #optoelectronic #led #character

The TMC2209 breakout board is a development board with the dedicated TMC2209-LA chip. It is designed to give users the chance to rapidly prototype their applications - making it possible to immediately check how the motor performs with TMC chips while developing the application's software.

TM1814 is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM to TM1814. When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc. Internal VDD pin is integrated with 5V regulator with less peripheral devices, which applies to guardrail tube, point source and LED decorative products. This product has excellent performance and reliable quality. Features  Adopt power CMOS technology  Withstand voltage of OUT output port is 32V  5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor  Constant current can achieve level 64 adjustment (6.5 mA-38mA)  PWM brightness controls circuit, and 256 brightness is adjustable  Accurate current output value Maximum error (between channels): ±3% Maximum error (between chips): ±5%  Single line serial concatenated port  Oscillation mode: build in RC vibration and conduct clock synchronization according to signals on data line. After receiving the data from this unit, it can reproduce follow-up data and send it to lower level through data output end, and signals will not be distorted and reduced along with cascade  Build in power on reset circuit, and after powering on reset, all registers are initialized to zero  External control mode data transmission rate is 800 KHZ  Internal control mode data transmission rate is 500 KHZ  Internal control mode chip sends 2048 points of data  Encapsulation mode: SOP8 #CommonPartsLibrary #IntegratedCircuit

The PICAXE-08M2 is a popular, low-cost 8-pin microcontroller chip known for its ease of use in education and hobbyist projects, offering enhanced features like parallel tasks, touch sensing, I2C, and configurable I/O pins for a small package, serving as a powerful upgrade to older PICAXE 08M chips. It supports up to 6 inputs/outputs, features a BASIC programming environment, and is ideal for getting started with embedded systems due to its simplicity and affordability. #CommonPartsLibrary #Microcontroller #PICAXE

The HT8950/HT8950A provide two special effects: Vibrato and Robot. The Vibrato effect is generated by alternating the frequency of an input signal up and down at a rate of 8Hz. The Robot function, on the other hand, converts an input voice into a Robot voice. Both effects can be selected depending on which pin is triggered, either ROB or VIB. For the output frequency level shifting, the chips provide seven steps which can be selected #CommonPartsLibrary #IntegratedCircuit

The PICAXE-18M2+ is a versatile, low-cost 18-pin microcontroller chip popular in education and hobbyist projects, offering enhanced M2 series features like configurable I/O (up to 16 pins), parallel tasks, touch sensors, and extra memory, making it an upgrade over older PICAXE 18-pin chips, programmed via simple PICAXE BASIC or Logicator software with a free editor. #Microcontroller #PICAXE

The Antminer BM1397 BM1397AG chip supports the SHA256 algorithm, which can be used for BTC, BCH and other encrypted digital currency mining, and will be used in the next-generation SHA256 algorithm of the new Antminer S17 and T17. BM1397 adopts global TSMC FinFET technology, a single chip integrates more than 1 billion transistors, and has been continuously optimized in terms of circuit structure and low power consumption technology. The energy efficiency ratio of BM1397 is 30J/T. The high-quality Antminer BM1397AG can replace damaged chips on S17, S17+, S17Pro, T17, T17+ hash boards. Please note that we recommend that each Hash board only replace 5 damaged chips at most. Of course, Antminer BM1397AD and Antminer BM1397AI can also replace damaged chips of S17, S17+, S17Pro, T17, T17+ hash boards. These three kinds of chips are universal and can be replaced with each other.

Font chips GT24L16M1Y20 DFN-8_L3.0-W2.0-P0.50-BL-EP LCSC Part Number: C126762 JLCPCB Part Class: undefined Manufactured by GENITOP(高通)

RF Chips TRF7961RHBR VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6 LCSC Part Number: C2654834 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

RF Chips TRF7961RHBRG4 VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6 LCSC Part Number: C2155616 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

RF Chips TRF7961RHBTG4 VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6 LCSC Part Number: C2155610 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

RF Chips TRF7963ARHBT VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6 LCSC Part Number: C2654801 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

RF Chips RX95HF-VMD5T VFQFPN-32_L5.0-W5.0-P0.50-TL-EP3.5 LCSC Part Number: C2654804 JLCPCB Part Class: undefined Manufactured by ST(意法半导体)

RF Chips NTP53121G0JTZ SO-8_L4.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C1850409 JLCPCB Part Class: undefined Manufactured by NXP(恩智浦)

RF Chips MN63Y1212-E1 SON-8_L2.0-W2.0-P0.50-BL-EP LCSC Part Number: C2654881 JLCPCB Part Class: undefined Manufactured by PANASONIC(松下)