Este circuito tiene la función de controlador para cuatro circuitos de tiras de luces LED múltiple, donde se usarán convertidores reductores, ya que es el mas simple de los controladores de conmutación (tipo Buck) y en este circuito esta aplicado ya que el voltaje de la carga nunca supera el 85% del voltaje de la alimentación y es capaz de regular la potencia AC de entrada y convertirlo para los 4 voltajes de salidas en DC, con el objetivo de alimentar las 4 tiras de luces LED. Este circuito convertidor reductor generalmente usa un MOSFET de potencia para cambiar el voltaje de alimentación a través de un inductor y las cargas que son las tiras de luces LED en serie. El inductor se utiliza para almacenar energía cuando se enciende el MOSFET, está esta energía se utiliza para proporcionar la corriente a las tiras de luces LED (las cuales tienen un consumo de 350 mA) cuando se apaga el MOSFET. Un diodo a través de las tiras LED y el circuito proporciona una ruta de retorno para que la corriente durante el tiempo de apagado del MOSFET.

This project is designed to measure water level of two tanks using ultrasonic sensors interfaced with the ESP32 microcontroller. The design leverages the processing power and wireless connectivity of the ESP32 to accurately monitor water levels and support automated water management processes. Key components include two ultrasonic sensors for precise distance measurement, robust voltage regulation using an LM2596 buck converter, and reliable power management circuits. Its modular design approach facilitates easy expansion and integration with other systems, making it an ideal solution for both DIY enthusiasts and professionals in automated fluid control and IoT applications. Firmware: https://github.com/jharwinbarrozo/ESP32-Dual-Ultrasonic-Water-Level-Monitoring-System #ESP32 #UltrasonicSensor #WaterLevelSensor #LM2596 #VoltageRegulator #ModularDesign #IoT #DIYProjects #ElectronicsDesign #automation

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adafruit buck converter. Expect to squeeze around 5-10% SoC from a typical Li-Ion battery. Input Voltage Range: 2.5V to 5.5V Assembled at pcbway.com

This project is a DC-DC Buck converter based on the LM2596 IC. It is designed to step down the input voltage from 12V to a regulated output of 5V #Buck #LM2596 #project

Build your own Modular LED Sign! This design prioritizes accessibility which means that the BoM can be ordered on Amazon and that everything was designed with solder-ability in mind. NOTE: This board is still an unfinished prototype that has not been built and verified. Operating Instructions: 1. [Important!] Power your buck converter and adjust the output voltage to 1.5V output before attempting to power the LEDs. If you cannot power the buck converter, just turn the potentiometer counterclockwise to its maximum setting.

IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Kitchen LED Strip Motion & Ambient-Light Controller with 12 V PWM Dimming, PIR Sensor, Ambient Light Sensor, MCU Control, Buck Regulator, and Protection Circuits (TVS, PTC Fuse, Reverse-Polarity Diode) #KitchenLEDController #MotionDetection #AmbientLightSensor

Buck converter from 5V to 3.75V without dedicated IC