• ATtiny13 Tiny Neo Tester

    ATtiny13 Tiny Neo Tester

    An ATtiny13 is more than sufficient to control almost any number of NeoPixels via an IR remote. The NeoController was originally developed as a tester for 800kHz NeoPixel strips. Since there was still so much flash left in the ATtiny13, an IR receiver was integrated so that some parameters can be controlled with an IR remote control. In this way, it is also suitable as a simple and cheap remote-controlled control unit for NeoPixels. Due to its small size (21.6mm x 11.4mm), it can be soldered directly to the LED strip without any problems. The power supply via a USB-C connection enables currents of up to 3A. There is still more than a third of the flash memory left for additional ideas.

    jecstronic

    jecstronic

    0 Uses

    1 Comment

    2 Stars

  • ATtiny13 TinyCandle

    ATtiny13 TinyCandle

    TinyCandle is a simple tealight candle simulation based on the ATtiny13A.

    jecstronic

    jecstronic

    +

    jharwinbarrozo

    0 Uses

    1 Comment

    1 Star

  • Ultrasonic Distance Meter Reference Design

    Ultrasonic Distance Meter Reference Design

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design .

    vasy_skral

    vasy_skral

    +

    cherepanyadima

    0 Uses

    13 Comments

    1 Star

  • Ultrasonic Distance Meter Reference Design

    Ultrasonic Distance Meter Reference Design

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    andresroa

    andresroa

    0 Uses

    0 Comments

    1 Star

  • ATtiny85 TinyCharger

    ATtiny85 TinyCharger

    TinyCharger is an ATtiny25/45/85-based, single-cell Li-ion battery charger with selectable charging current limit (100mA - 1000mA) and an OLED display for monitoring.

    jecstronic

    jecstronic

    0 Uses

    0 Comments

    1 Star

  • ATTINY13-Battery-Meter-test-3

    ATTINY13-Battery-Meter-test-3

    This board measure battery voltage and shows a current battery level. Based on ATTINY13 MCU and compatible with Arduino IDE. J1 is 6-Pin AVR ISP Connector

    vasy_skral

    vasy_skral

    0 Uses

    5 Comments

    0 Stars

  • Ultrasonic Distance Meter Reference Design

    Ultrasonic Distance Meter Reference Design

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    sircayzer

    sircayzer

    0 Uses

    5 Comments

    0 Stars

  • Ultrasonic Distance Meter Reference Design

    Ultrasonic Distance Meter Reference Design

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    septafiansyah

    septafiansyah

    0 Uses

    1 Comment

    0 Stars

  • Ultrasonic Distance Meter Reference Design wtDA

    Ultrasonic Distance Meter Reference Design wtDA

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    roman16

    roman16

    0 Uses

    1 Comment

    0 Stars

  • Ultrasonic Distance Meter Reference Design jRnP

    Ultrasonic Distance Meter Reference Design jRnP

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    roman16

    roman16

    0 Uses

    1 Comment

    0 Stars

  • IR remote control Module

    IR remote control Module

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

    ranveerdev

    ranveerdev

    0 Uses

    1 Comment

    0 Stars

  • IR remote control Reference Design 3c2m

    IR remote control Reference Design 3c2m

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #arduino #attiny2313 #TPS613222A #ISP #buzzer #referenceDesign #simple-embedded #microchip #template #reference-design

    caroln

    caroln

    0 Uses

    1 Comment

    0 Stars

  • Ultrasonic Distance Meter Module

    Ultrasonic Distance Meter Module

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #reusable #module #simple-embedded #microchip #sublayout

    yos-bit

    yos-bit

    0 Uses

    1 Comment

    0 Stars

  • Skin Moisture Optical Sensor 3-Channel f165

    Skin Moisture Optical Sensor 3-Channel f165

    Двухслойная плата 3-канального оптического датчика влажности кожи с ATTINY13, OPA333 и RP2040-LCD-0.96

    vdsgdfghdfdfgh

    vdsgdfghdfdfgh

    0 Uses

    0 Comments

    0 Stars

  • Ultrasonic Distance Meter _v1

    Ultrasonic Distance Meter _v1

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design .

    cherepanyadima

    cherepanyadima

    0 Uses

    0 Comments

    0 Stars

  • IR remote control Module

    IR remote control Module

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

    luiserre

    luiserre

    +

    luiserre46

    0 Uses

    0 Comments

    0 Stars

  • Ultrasonic Distance Meter Reference Design vwMF

    Ultrasonic Distance Meter Reference Design vwMF

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    michaelcox

    michaelcox

    0 Uses

    0 Comments

    0 Stars

  • IR remote control Module vLM2

    IR remote control Module vLM2

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

    galaturka

    galaturka

    0 Uses

    0 Comments

    0 Stars

  • IR remote control Module heFG

    IR remote control Module heFG

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

    thanusht

    thanusht

    0 Uses

    0 Comments

    0 Stars

  • Snowflake PCB

    Snowflake PCB

    ATTiny10 Based Snowflake PCB Programmed using Arduino over Tiny Programming Interface Roughly 88x80 mm size

    jlamflux

    jlamflux

    0 Uses

    0 Comments

    0 Stars

  • Ultrasonic Distance Meter Module

    Ultrasonic Distance Meter Module

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #reusable #module #simple-embedded #microchip #sublayout

    gdaris

    gdaris

    0 Uses

    0 Comments

    0 Stars

  • IR remote control Reference Design

    IR remote control Reference Design

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #arduino #attiny2313 #TPS613222A #ISP #buzzer #referenceDesign #simple-embedded #microchip #template #reference-design

    vasy_skral

    vasy_skral

    +

    cherepanyadima

    0 Uses

    0 Comments

    0 Stars

  • Arduino Wearable Watch

    Arduino Wearable Watch

    This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #wearableDevices #arduino #attiny85

    jharwinbarrozo

    jharwinbarrozo

    0 Uses

    7 Comments

    0 Stars

  • Arduino Watch Module 6TTY

    Arduino Watch Module 6TTY

    This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

    epicella

    epicella

    0 Uses

    7 Comments

    0 Stars

  • Arduino Watch Module 31Jun

    Arduino Watch Module 31Jun

    This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

    deucebot22

    deucebot22

    0 Uses

    5 Comments

    0 Stars