CAN-IC-Schnittstelle Single Wire CAN Transceiver #Schnittstelle #Transceiver #CANBus

10 µH Unshielded Drum Core, Wire wound Inductor 2.2A 100mOhm Max Nonstandard #CommonPartsLibrary #Inductor #FixedInductor #WE-PD2

Dip Switch SPST 6 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-6LPSTJ is a through-hole terminal block connector designed for secure wire-to-board connections. It features a multi-position configuration with a compact footprint and robust clamping mechanism, making it suitable for industrial and general-purpose electronic applications. The component ensures reliable electrical contact and ease of installation for power and signal wiring. Key Features Multi-position terminal block (6 positions) Through-hole mounting for strong mechanical stability Screw clamp or spring clamp termination (depending on variant) მაღალი reliability for power and signal connections مقاومة عالية للاهتزاز (vibration-resistant design) Standard pitch for compatibility with common PCB layouts Electrical Characteristics Rated Voltage: Typically up to 300 V (application dependent) Rated Current: Typically up to 10–15 A per contact (depends on wire gauge) Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Mechanical Characteristics Number of Positions: 6 Pitch: Typically 5.08 mm (verify exact datasheet) Mounting Type: Through-hole PCB mount Wire Size Range: عادةً 24–12 AWG (depends on design) Actuation Type: Screw or spring clamp Material Properties Housing Material: Flame-retardant thermoplastic (UL94 V-0 rated) Contact Material: Copper alloy Plating: Tin-plated contacts for corrosion resistance Environmental Specifications Operating Temperature Range: -40°C to +105°C (typical) مقاومة للبيئات الصناعية القياسية RoHS compliant Applications Power distribution modules Industrial control systems PCB-based wiring interfaces Automation and instrumentation systems Compliance and Standards UL recognized (model dependent) IEC compliance for terminal blocks RoHS compliant #commonpartslibrary #switch #dip #spst

8 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector #terminalBlock #Wire-Board

6 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector

8 Position Wire to Board Terminal Block Vertical with Board 0.100" (2.54mm) Through Hole #CommonPartsLibrary #Connector #Terminal-block #WR-TBL Series 4039B

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #commonpartslibrary #connector

3 Position Wire to Board Terminal Block Vertical with Board 0.100" (2.54mm) Through Hole #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 4039B

6 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector #WR-TBL Series 2431

10 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Surface Mount #Connector #Terminal-block #Wire-board #Omnimate LSF-SMD

3 Position Wire to Board Terminal Block Horizontal with Board 0.400" (10.16mm) Through Hole #CommonPartsLibrary #Connector #Terminal-Block #Wire-Board #282843

3 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #CommonPartsLibrary #Connector #TerminalBlock #Wire-Board

2 Position Wire to Board Terminal Block Horizontal with Board 0.098" (2.50mm) Surface Mount #CommonPartsLibrary #Connector #9276

Phoenix Contact 4 Position Wire to Board Terminal Block 30° (150°) Angle with Board 0.295 (7.50mm) Through Hole None None https://www.snapeda.com/parts/1098177/Phoenix+Contact/view-part/?ref=eda https://www.snapeda.com/parts/1098177/Phoenix+Contact/view-part/?ref=snap 1098177 In Stock PHOENIX

3 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #CommonPartsLibrary #Connector #Omnimate LMF

2 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector #WR-TBL Series 1031

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #commonpartslibrary #connector #terminalblock

The BT151-600R specification defines the engineering requirements for a high-power silicon controlled rectifier designed for phase control and switching applications in electronic power systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure reliable switching performance, controlled power regulation, and long-term operational stability. The device is intended for use in applications requiring efficient control of AC power or high-current DC switching, such as motor speed control, light dimming, power regulation circuits, and industrial control systems. It provides controlled conduction behavior triggered by gate activation and remains in conduction until current falls below the holding condition. Engineering Requirements The semiconductor device shall be manufactured using controlled silicon processing techniques to ensure stable thyristor operation, consistent triggering characteristics, and reliable current handling capability. The device shall maintain predictable switching behavior under defined electrical, thermal, and environmental operating conditions. Electrical characteristics shall ensure reliable gate triggering sensitivity, stable on-state conduction, and controlled turn-off behavior under appropriate circuit conditions. The device shall maintain performance integrity under surge conditions and repetitive switching operation within its design limits. Thermal performance shall support efficient heat dissipation through the package structure and mounting interface. The device shall be suitable for attachment to appropriate heat sinking systems to maintain safe operating junction conditions during continuous or high-load operation. Mechanical and package construction shall be suitable for surface-mount or power PCB assembly and shall ensure robust mechanical stability during soldering, handling, and thermal cycling. Workmanship shall be free from defects such as contamination, cracks, bond wire issues, or structural inconsistencies that could impact performance or reliability. Inspection, validation, and testing shall be performed using controlled procedures and calibrated equipment to ensure compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established change control processes. Documentation Supporting documentation shall include official datasheets, electrical characterization reports, thermal performance data, qualification test records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure traceability and consistency. Revision Control Any modification to this specification shall be managed through formal engineering change control procedures. All revisions shall undergo technical review, validation, and approval prior to implementation to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #SCR #Thyristor #PowerElectronics #PhaseControl #IndustrialControl #Semiconductor #PowerSwitching #QualityAssurance #EngineeringDocumentation

6 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector #EBWA

2 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.197" (5.00mm) Through Hole #CommonPartsLibrary #Connector #COMBICON SPTA

6 Position Wire to Board Terminal Block 55° (125°) Angle with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector #WR-TBL Series 2211

Molex SL series right-angle PCB header with latch and split pegs, 2.54mm (0.100") pitch wire-to-board connector, available in 2 to 25 circuit positions, through-hole mounting, 0.64mm square pins, glass-filled polyester UL94V-0 housing, phosphor bronze terminals, positive locking latch for secure cable retention, designed for reliable signal and power connections in industrial, consumer, automotive and embedded electronic applications. Molex 70551-0003 Molex SL header, Molex SL series connector, Molex 70400, Molex 70430, right angle header with latch, split peg header, 2.54mm wire to board connector, 0.100 inch header, Molex SL right angle header, locking PCB header, through hole connector, phosphor bronze header, Molex wire to board system Hashtags: #MolexSL #MolexConnector #SLSeries #WireToBoardConnector #RightAngleHeader #LockingHeader #SplitPegHeader #254mmPitch #100MilConnector #ThroughHoleConnector #PCBHeader #PhosphorBronzeContacts #IndustrialConnector #EmbeddedHardware #Molex70400 #Molex704302.54mm Pitch SL Header, Single Row, Right Angle, 3.05mm Pocket, Shrouded, with Beveled Plastic Peg, 4 Circuits, Tin (Sn) Plating

2 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole #CommonPartsLibrary #Connector #Terminal-block

2 Position Wire to Board Terminal Block Horizontal with Board 0.100" (2.54mm) Through Hole #CommonPartsLibrary #Connector #Terminal-Block #Wire-Board #OSTVN

1x2P PH 1 2mm male 2 -25℃~+70℃ 5A Surface Mount SMD,P=2mm Wire To Board / Wire To Wire Connector ROHS #CommonPartsLibrary #Connector #wire-board #wire-wire