• Haptic Glove Controller Board Rev2 9f7d

    Haptic Glove Controller Board Rev2 9f7d

    Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

    klam23

    1 Comment

  • ESP32 ROBOT CONTROLLER 73e5 8d43

    ESP32 ROBOT CONTROLLER 73e5 8d43

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    edinso

    1 Comment

  • ESP32 Battery Management System Controller Board 5FuW

    ESP32 Battery Management System Controller Board 5FuW

    A smart ESP32-based battery management system controller board for Lithium ion battery packs/cells. Capable of communicating to wide varieties of hybrid-smart inverters with CANbus, RS485 and UART communication.

    atharav25

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module tJmB

    ESP32 RS485 (Modbus) Controller Module tJmB

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    timos

    1 Comment

  • ESP32 ROBOT CONTROLLER 73e5

    ESP32 ROBOT CONTROLLER 73e5

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    edinso

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module 9y2J

    ESP32 RS485 (Modbus) Controller Module 9y2J

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    jan123456

    1 Comment

  • Pulse Width Modulation (PWM) Controller pSkY

    Pulse Width Modulation (PWM) Controller pSkY

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    dancash

    1 Comment

  • ESP32 ROBOT CONTROLLER kD13

    ESP32 ROBOT CONTROLLER kD13

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    zhaohw19

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module gA8Z

    ESP32 RS485 (Modbus) Controller Module gA8Z

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    lexi1000

    1 Comment

  • Pulse Width Modulation (PWM) Controller 7kYw

    Pulse Width Modulation (PWM) Controller 7kYw

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    royner

    1 Comment

  • Volumetric: Wifi LED Strip controller

    Volumetric: Wifi LED Strip controller

    Wi-Fi LED strip controller made with few goals: Dual voltage support 12V and 24V 2 independent channels for color temperature adjustments No high pitch noise in all modes Powerful enough to handle current up to 17.5A (in total, limited by connectors) Control buttons on the device body Connectors for external buttons Can be used with already installed LED strips Support of open source firmware, like https://esphome.io/

    djkasch

    1 Comment

  • Pulse Width Modulation (PWM) Controller vRur

    Pulse Width Modulation (PWM) Controller vRur

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    santos200

    1 Comment

  • ESP32 ROBOT CONTROLLER mtJ7

    ESP32 ROBOT CONTROLLER mtJ7

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    chris-stylus

    1 Comment

  • Pulse Width Modulation (PWM) Controller

    Pulse Width Modulation (PWM) Controller

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    azael22

    1 Comment

  • ESP32 Battery Management System Controller Board e5Wk

    ESP32 Battery Management System Controller Board e5Wk

    A smart ESP32-based battery management system controller board for Lithium ion battery packs/cells. Capable of communicating to wide varieties of hybrid-smart inverters with CANbus, RS485 and UART communication.

    ihscielle

    1 Comment

  • Volumetric: Wifi LED Strip controller

    Volumetric: Wifi LED Strip controller

    Wi-Fi LED strip controller made with few goals: Dual voltage support 12V and 24V 2 independent channels for color temperature adjustments No high pitch noise in all modes Powerful enough to handle current up to 17.5A (in total, limited by connectors) Control buttons on the device body Connectors for external buttons Can be used with already installed LED strips Support of open source firmware, like https://esphome.io/

    danielkaye

    1 Comment

  • Pulse Width Modulation (PWM) Controller

    Pulse Width Modulation (PWM) Controller

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    cams

    1 Comment

  • ESP32 Robot Controller (messed up on purpose)

    ESP32 Robot Controller (messed up on purpose)

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes. Forked from original project: https://www.flux.ai/jr98/esp32-robot-controller

    greg

    1 Comment

  • ESP32 ROBOT CONTROLLER

    ESP32 ROBOT CONTROLLER

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    santhosha

    1 Comment

  • Pulse Width Modulation (PWM) Controller 2FGw

    Pulse Width Modulation (PWM) Controller 2FGw

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    josue1215

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    josegus

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    sabri93

    1 Comment

  • ESP32 RS485 (Modbus) Controller Reference Design ibga

    ESP32 RS485 (Modbus) Controller Reference Design ibga

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and headers for connecting sensors and actuators. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated #reference-design

    emryou42

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    blaktaut

    1 Comment

  • ESP32 ROBOT CONTROLLER

    ESP32 ROBOT CONTROLLER

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    dumbocircus

    1 Comment